Issue 2, 2023

Pyrolysis transports, and transforms, PFAS from biosolids to py-liquid

Abstract

Per- and poly-fluoroalkyl substances (PFAS) in wastewater solids have resulted in bans on land application of biosolids, causing utilities to explore thermal treatment options. Pyrolysis is a thermal treatment process that converts wastewater solids to biochar, py-liquid (i.e., aqueous phase liquid and non-aqueous phase liquid), and py-gas. Research on the impact of pyrolysis on PFAS in biosolids has yielded mixed results, and no research has investigated if PFAS are present in the py-liquid. The goals of this research were to determine if pyrolysis releases PFAS with the effluent py-liquid and to distinguish “removal” from “transformation” of PFAS. Triplicate batch pyrolysis experiments were performed at 500 °C, 650 °C, and 800 °C. Targeted PFAS were analyzed in biosolids, biochar, and py-liquid via LC-MS/MS, and PFAS precursor compounds were measured in the biosolids and biochar using the total oxidizable precursor assay. Pyrolysis removed all targeted PFAS from resulting biochars, with the one exception of perfluorobutanoic acid (PFBA) being present slightly above detection limit in one of the 800 °C biochar samples. PFAS precursor compounds were not detected in five of the nine biochar samples, and the other four biochar samples had only perfluoropentanoic acid (PFPeA) detected slightly above detection limit. Overall, pyrolysis removed >99% of targeted PFAS and PFAS precursor compounds from the solid phase. Interestingly, the mass of N-ethyl perfluorooctane sulfonamidoethanol (NEtFOSE), and N-methyl perfluorooctane sulfonamidoethanol (NMeFOSE) increased by over two orders of magnitude in the effluent py-liquid compared to the influent biosolids. This phenomenon occurred at all three temperatures tested. Similarly, the mass of PFBA also substantially increased following pyrolysis due either to the thermal breakdown of higher chain PFAS, the transformation of PFBA precursor compounds, or a combination of both. These key findings illuminate that pyrolysis of biosolids can cause transformation reactions that lead to specific PFAS in the effluent py-liquid found at higher levels than in the influent biosolids. Overall, this research indicates that pyrolysis could be employed to remove PFAS from biosolids to generate a value-added biochar product for soil amendment benefits, but py-liquid that contains PFAS could also be generated.

Graphical abstract: Pyrolysis transports, and transforms, PFAS from biosolids to py-liquid

Supplementary files

Article information

Article type
Paper
Submitted
01 sen 2022
Accepted
16 dek 2022
First published
16 dek 2022

Environ. Sci.: Water Res. Technol., 2023,9, 386-395

Pyrolysis transports, and transforms, PFAS from biosolids to py-liquid

P. McNamara, M. S. Samuel, S. Sathyamoorthy, L. Moss, D. Valtierra, H. Cortes Lopez, N. Nigro, S. Somerville and Z. Liu, Environ. Sci.: Water Res. Technol., 2023, 9, 386 DOI: 10.1039/D2EW00677D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements