Issue 2, 2022

In situ nanoarchitecturing of conjugated polyamide network-derived carbon cathodes toward high energy-power Zn-ion capacitors

Abstract

Zn-ion hybrid capacitors, with a large-capacity Zn anode (battery-type) integrated with a capacitive cathode, hold great potential to relieve the unsatisfactory energy-to-power ratio of aqueous supercapacitors. The research into cathode design is expected to bridge the capacity gap between the two electrodes without sacrificing the inherent power/cycling superiorities but is still in its infancy. In this work, robust O/N-decorated porous carbon cathodes were derived by the in situ calcination of conjugated polyamides, wherein the solvent-guided strategy was applied to shape the carbon nanoarchitecture for the activation of Zn storage sites. After optimizing the solvent–precursor interactions, the packed particle architecture (CDMF) ultimately exposed ample electrosorption platform up to 1656 m2 g−1, and O/N dopants (15.77 wt%) promoted interfacial Zn adsorption by lowering the energy barrier for C–O–Zn bonding. Further experimental evaluations revealed that the C[double bond, length as m-dash]O species on the robust CDMF framework tended to boost reversible chemical adsorption to form C–O–Zn bondings while maintaining durable charge transfer, which minimized capacity loss even at high rates. As a result, the aqueous CDMF//Zn capacitor achieved a large capacity of 180 mA h g−1, an ultrahigh energy density of 106.7 W h kg−1 and an excellent power output of 13.4 kW kg−1, as well as 91.1% capacity retention over 300 000 cycles. This design strategy gives an appealing insight into the subtle fabrication of high-performance carbon cathodes and highlights their applicability towards practical Zn-based energy storage in the future.

Graphical abstract: In situ nanoarchitecturing of conjugated polyamide network-derived carbon cathodes toward high energy-power Zn-ion capacitors

Supplementary files

Article information

Article type
Paper
Submitted
27 avq 2021
Accepted
26 noy 2021
First published
26 noy 2021

J. Mater. Chem. A, 2022,10, 611-621

In situ nanoarchitecturing of conjugated polyamide network-derived carbon cathodes toward high energy-power Zn-ion capacitors

X. Zheng, L. Miao, Z. Song, W. Du, D. Zhu, Y. Lv, L. Li, L. Gan and M. Liu, J. Mater. Chem. A, 2022, 10, 611 DOI: 10.1039/D1TA07350H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements