Issue 39, 2022

Designed incorporation of semi-crystalline domains into structured latex particles via solvent-aided emulsion polymerization

Abstract

Despite significant effort, it remains a major challenge to match the mechanical properties of films cast from solvent-based polymers using waterborne polymer dispersions. In this paper, we study an emulsion polymerization route for the designed incorporation of semi-crystalline domains of poly(stearyl acrylate) into structured particles as a way to improve mechanical performance. First, the use of a co-solvent to facilitate the polymerization of stearyl acrylate by emulsion polymerization is demonstrated. It is shown that with as little as 5 wt% of isopropanol (IPA) in the aqueous phase the diffusion limitations that typically hinder polymerization of very hydrophobic monomers are overcome. The solvent-aided approach is then used in the design of seeded semibatch emulsion polymerization reactions using an amorphous poly(styrene-co-butyl acrylate) latex as the seed. This technique allows for the production of kinetically frozen particle morphologies that are shown to be beneficial for the final mechanical properties of films cast from the structured latexes and outperform conventional core–shell type latexes.

Graphical abstract: Designed incorporation of semi-crystalline domains into structured latex particles via solvent-aided emulsion polymerization

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
15 iyl 2022
Accepted
15 sen 2022
First published
20 sen 2022

Polym. Chem., 2022,13, 5636-5646

Designed incorporation of semi-crystalline domains into structured latex particles via solvent-aided emulsion polymerization

A. Perez, E. Kynaston, C. Lindsay and N. Ballard, Polym. Chem., 2022, 13, 5636 DOI: 10.1039/D2PY00926A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements