Issue 4, 2022

Flexible InP–ZnO nanowire heterojunction light emitting diodes

Abstract

Flexible, substrate-free nanowire (NW) devices are desirable to overcome the extremely challenging task of integrating III–V or III–N semiconductor devices such as LEDs and lasers on a range of optoelectronic circuits or biochips. In this work, we report the demonstration of core–shell p-InP/n-ZnO heterojunction NW array LEDs. The emission from the devices consists of three peaks at room temperature due to conduction band-to-heavy hole band transition, conduction band-to-light hole band transition and recombination at the substrate. At 78 K, an additional peak due to Zn acceptor levels is observed, whereas the peak due to the conduction band-to-light hole band transition quenches. Flexible LEDs are then fabricated by embedding the NW arrays in SU-8 to enable subsequent lift-off from the substrate. Compared with the original on-substrate LED device, broader, red-shifted and multiple peaks are observed from the flexible devices, which may be due to non-uniform strain related effects in the NWs caused by the SU-8 film. A slightly higher series resistance as compared to the on-substrate device and significant Joule heating suggest that good heatsinking is required for these flexible devices. Nevertheless, our study paves a promising way towards flexible and low power LEDs.

Graphical abstract: Flexible InP–ZnO nanowire heterojunction light emitting diodes

Supplementary files

Article information

Article type
Communication
Submitted
11 okt 2021
Accepted
28 fev 2022
First published
28 fev 2022

Nanoscale Horiz., 2022,7, 446-454

Flexible InP–ZnO nanowire heterojunction light emitting diodes

N. Gagrani, K. Vora, L. Fu, C. Jagadish and H. H. Tan, Nanoscale Horiz., 2022, 7, 446 DOI: 10.1039/D1NH00535A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements