Issue 3, 2021

Self-supporting V2O5 nanofiber-based electrodes for magnesium–lithium-ion hybrid batteries

Abstract

The increasing demand for high energy, sustainable and safer rechargeable electrochemical storage systems for portable devices and electric vehicles can be satisfied by the use of hybrid batteries. Hybrid batteries, such as magnesium–lithium-ion batteries (MLIBs), using a dual-salt electrolyte take advantage of both the fast Li+ intercalation kinetics of lithium-ion batteries (LIBs) and the dendrite-free anode reactions. Here we report the utilization of a binder-free and self-supporting V2O5 nanofiber-based cathode for MLIBs. The V2O5 cathode has a high operating voltage of ∼1.5 V vs. Mg/Mg2+ and achieves storage capacities of up to 386 mA h g−1, accompanied by an energy density of 280 W h kg−1. Additionally, a good cycling stability at 200 mA g−1 over 500 cycles is reached. The structural integrity of the V2O5 cathode is preserved upon cycling. This work demonstrates the suitability of the V2O5 cathode for MLIBs to overcome the limitations of LIBs and MIBs and to meet the future demands of advanced electrochemical storage systems.

Graphical abstract: Self-supporting V2O5 nanofiber-based electrodes for magnesium–lithium-ion hybrid batteries

Supplementary files

Article information

Article type
Paper
Submitted
09 dek 2020
Accepted
18 dek 2020
First published
05 yan 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 1354-1359

Self-supporting V2O5 nanofiber-based electrodes for magnesium–lithium-ion hybrid batteries

A. M. Diem, K. Hildenbrand, L. Raafat, J. Bill and Z. Burghard, RSC Adv., 2021, 11, 1354 DOI: 10.1039/D0RA10384E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements