Issue 20, 2021

Fabrication of an autonomously self-healing flexible thin-film capacitor by slot-die coating

Abstract

Flexible pressure sensors with self-healing abilities for wearable electronics are being developed, but generally either lack autonomous self-healing properties or require sophisticated material processing methods. To address this challenge, we developed flexible, low-cost and autonomously self-healing capacitive sensors using a crosslinked poly(dimethylsiloxane) through metal–ligand interactions processed into thin films via slot-die coating. These films have excellent self-healing properties, approximately 1.34 × 105 μm3 per hour at room temperature and 2.87 × 105 μm3 per hour at body temperature (37 °C). Similarly, no significant change in capacitance under bending strain was observed on these flexible thin-films when assembled on poly(ethyleneterephthalate) (PET) substrates; capacitors showed good sensitivity at low pressure regimes. More importantly, the devices fully recovered their sensitivity after being damaged and healed, which is directly attributed to the rapid and autonomous self-healing of the dielectric materials.

Graphical abstract: Fabrication of an autonomously self-healing flexible thin-film capacitor by slot-die coating

Supplementary files

Article information

Article type
Paper
Submitted
28 iyl 2021
Accepted
12 sen 2021
First published
13 sen 2021
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2021,2, 6676-6683

Fabrication of an autonomously self-healing flexible thin-film capacitor by slot-die coating

S. Vu, G. Nagesh, N. Yousefi, J. F. Trant, D. S.-K. Ting, M. J. Ahamed and S. Rondeau-Gagné, Mater. Adv., 2021, 2, 6676 DOI: 10.1039/D1MA00656H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements