Issue 1, 2021

A one-step electrochemically reduced graphene oxide based sensor for sensitive voltammetric determination of furfural in milk products

Abstract

Designing of fast, inexpensive and sensitive furfural determination methods for dairy milk is crucial in analytical and food chemistry. In this study, an electrochemical sensor was developed for the cathodic determination of furfural using a one-step electrochemically reduced graphene oxide (ErGO) modified glassy carbon electrode (GCE). The morphology and chemical constituents of the obtained ErGO/GCE were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman and X-ray photoelectron spectroscopy (XPS). The results showed that the fast and green electrochemical reduction process effectively eliminated the oxygen-containing groups in GO and produced reduced graphene with a high surface area and improved electron transfer kinetics. In addition, the ErGO based sensor displayed excellent responses for furfural in a Na2HPO4–NaH2PO4 solution (pH = 9.18) with a wide linear range from 2 to 2015 μM and a low detection limit of 0.4 μM (S/N = 3). The reduction mechanism of furfural was also discussed. Furthermore, the feasibility of the sensor was confirmed by the determination of furfural in three milk samples which generated acceptable outputs.

Graphical abstract: A one-step electrochemically reduced graphene oxide based sensor for sensitive voltammetric determination of furfural in milk products

Article information

Article type
Paper
Submitted
20 sen 2020
Accepted
18 noy 2020
First published
19 noy 2020

Anal. Methods, 2021,13, 56-63

A one-step electrochemically reduced graphene oxide based sensor for sensitive voltammetric determination of furfural in milk products

Q. Wang, J. Zhang, Y. Xu, Y. Wang, L. Wu, X. Weng, C. You and J. Feng, Anal. Methods, 2021, 13, 56 DOI: 10.1039/D0AY01789B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements