Issue 12, 2020

The effect of nanoparticle presence on aerosol formation during nanoparticle-enhanced laser ablation inductively coupled plasma mass spectrometry

Abstract

The changes in aerosol physical properties were studied by applying Nanoparticle-Enhanced Laser Ablation Inductively Coupled Plasma Mass Spectrometry (NE-LA-ICP-MS). This approach was compared to conventional LA-ICP-MS method. Analyte signal enhancement was related to the particle number concentration of aerosol for three sizes of Au nanoparticles (NPs) applied on the metal sample surface in the form of droplets. The dependence of the number of generated particles on the laser fluence in the range from 0.5 to 10 J cm−2 was studied. A different shape of the particle size distribution (PSD) of NE-LA-ICP-MS and LA-ICP-MS aerosol was determined. The aerosol structure was additionally studied on filters using scanning electron microscopy (SEM). Compared to LA-ICP-MS, NE-LA-ICP-MS produced a larger proportion of small particles (<30 nm), and was approaching the ideal monodisperse aerosol that is evaporated in ICP with a high efficiency. The measurements proved that NPs on the sample surface could influence the evaporation, condensation and coagulation processes in aerosol formation as well as the signal of analytes in ICP-MS.

Graphical abstract: The effect of nanoparticle presence on aerosol formation during nanoparticle-enhanced laser ablation inductively coupled plasma mass spectrometry

Article information

Article type
Paper
Submitted
13 iyl 2020
Accepted
21 sen 2020
First published
25 sen 2020

J. Anal. At. Spectrom., 2020,35, 2893-2900

The effect of nanoparticle presence on aerosol formation during nanoparticle-enhanced laser ablation inductively coupled plasma mass spectrometry

M. Holá, Z. Salajková, A. Hrdlička, J. Ondráček, K. Novotný, D. Pavliňák, M. Vojtíšek-Lom, L. Čelko, P. Pořízka, V. Kanický, D. Prochazka, J. Novotný and J. Kaiser, J. Anal. At. Spectrom., 2020, 35, 2893 DOI: 10.1039/D0JA00324G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements