Issue 9, 2020

Evaluation of a modified halo flowing atmospheric pressure afterglow ion source for the analysis of directly injected volatile organic compounds

Abstract

A modified halo-shaped Flowing Atmospheric Pressure Afterglow (h-FAPA) source is coupled to an Atmospheric Pressure Interface Time of Flight Mass Spectrometer (API-TOFMS) for the analysis of gas samples. The h-FAPA is an ionization source easy to manufacture, operate and handle, and with low consumption in terms of gas flow rates and electric power. The analytical performance of this plasma-based ambient ionization source is evaluated for the direct analysis of VOCs, using benzene as a model compound. The influence of the different operating parameters, such as sampling distance, discharge current, and gas flow rates, is evaluated to optimize the detection of the benzene molecular ion. Matrix effects are evaluated using mixtures of different VOCs, and spiked synthetic air and human breath. Quantitative recoveries of benzene concentrations are around 100% in different VOC mixtures, showing low matrix effects. Moreover, calibration curves with similar sensitivities for benzene are obtained using spiked synthetic air and human breath. Limits of detection are in the order of 1 ng L−1 in both cases.

Graphical abstract: Evaluation of a modified halo flowing atmospheric pressure afterglow ion source for the analysis of directly injected volatile organic compounds

Article information

Article type
Paper
Submitted
01 apr 2020
Accepted
14 iyl 2020
First published
14 iyl 2020

J. Anal. At. Spectrom., 2020,35, 2002-2010

Evaluation of a modified halo flowing atmospheric pressure afterglow ion source for the analysis of directly injected volatile organic compounds

J. Fandino, J. Orejas, L. Chauvet, D. Blanco, P. Guillot, J. Pisonero and N. Bordel, J. Anal. At. Spectrom., 2020, 35, 2002 DOI: 10.1039/D0JA00140F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements