Issue 10, 2019

Dopant-free novel hole-transporting materials based on quinacridone dye for high-performance and humidity-stable mesoporous perovskite solar cells

Abstract

This study reports three newly developed dopant-free hole-transporting materials (HTMs) for perovskite solar cells. The design is based on a quinacridone (QA) dye as the core with three different extended end-capping moieties, namely, acenaphthylene (ACE), triphenylamine (TPA) and diphenylamine (DPA), attached to the QA core. These HTMs were synthesized and used to successfully fabricate in mesoscopic TiO2/CH3NH3PbI3/HTM perovskite devices. Under AM 1.5G illumination at 100 mW cm−2, the devices achieved a maximum efficiency of 18.2% for ACE-QA-ACE, 16.6% for TPA-QA-TPA and 15.5% for DPA-QA-DPA without any additives, whereas reference devices with doped spiro-OMeTAD as the HTM achieved a PCE of 15.2%. Notably, the unencapsulated devices based on the novel dopant-free HTMs exhibited impressive stability in comparison with the devices based on doped spiro-OMeTAD under a relative humidity of 75% for 30 days. These linear symmetrical HTMs pave the way to a new class of organic hole-transporting materials for cost-efficient and large-area applications of printed perovskite solar cells.

Graphical abstract: Dopant-free novel hole-transporting materials based on quinacridone dye for high-performance and humidity-stable mesoporous perovskite solar cells

Supplementary files

Article information

Article type
Paper
Submitted
26 noy 2018
Accepted
04 fev 2019
First published
04 fev 2019

J. Mater. Chem. A, 2019,7, 5315-5323

Dopant-free novel hole-transporting materials based on quinacridone dye for high-performance and humidity-stable mesoporous perovskite solar cells

H. D. Pham, S. M. Jain, M. Li, S. Manzhos, K. Feron, S. Pitchaimuthu, Z. Liu, N. Motta, H. Wang, J. R. Durrant and P. Sonar, J. Mater. Chem. A, 2019, 7, 5315 DOI: 10.1039/C8TA11361K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements