Issue 3, 2019

Air-stable lead-free hybrid perovskite employing self-powered photodetection with an electron/hole-conductor-free device geometry

Abstract

In this study, we have demonstrated the fabrication of one of the few lead-free perovskite photodetectors reported to date. In particular, we fabricated the photodetector based on a methylammonium bismuth iodide, MA3Bi2I9 (MABI), structure that works under a self-powered mode of operation. The optoelectronic properties of the photodetector were investigated systematically. The photoresponse of the photodetector was carefully studied and compared with the literature, which demonstrated the capability of the MABI structure for detecting light at a very low incident irradiance of 10 μW cm−2. Also, it exhibited a fast and reproducible response speed along with high photosensitivity (∼105) and detectivity (∼1012 Jones) at low operating voltages (0 V and 0.8 V) through the large effective device area. It was also revealed that the MABI photodetector had good stability after storage for two months at ambient conditions. It is therefore concluded that our photodetector fabricated with a MABI perovskite structure using a simple geometry has great potential to further improve the optoelectronic properties when proper electron/hole-transporting layers are fused for proper charge extraction. This will have significant benefits for next-generation cost-competitive optoelectronic technology to address the scalability issue.

Graphical abstract: Air-stable lead-free hybrid perovskite employing self-powered photodetection with an electron/hole-conductor-free device geometry

Supplementary files

Article information

Article type
Paper
Submitted
06 noy 2018
Accepted
16 dek 2018
First published
17 dek 2018

Nanoscale, 2019,11, 1217-1227

Air-stable lead-free hybrid perovskite employing self-powered photodetection with an electron/hole-conductor-free device geometry

A. A. Hussain, A. K. Rana and M. Ranjan, Nanoscale, 2019, 11, 1217 DOI: 10.1039/C8NR08959K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements