Issue 2, 2018

MoS2-covered SnS nanosheets as anode material for lithium-ion batteries with high capacity and long cycle life

Abstract

A designed hierarchical nanostructure consisting of SnS nanosheets and ultrathin MoS2 nanosheets was achieved by a facile hydrothermal process with the assistance of fluoride and glucose. In this unique architecture, on the one hand, SnS and MoS2 nanosheets can greatly reduce the Li-ion and electron diffusion distance in the electrode. On the other hand, MoS2 nanosheets and amorphous carbon can not only prevent the direct exposure of SnS to the electrolyte but also maintain the structural stability of the electrode. In addition, the MoS2 nanosheets can offer more active sites for hosting lithium ions, resulting in higher capacity. When evaluated as anode material for lithium-ion batteries (LIBs), this SnS/MoS2–C composite exhibited stable cycling performance (989.7 mA h g−1 at 0.2 A g−1 after 60 cycles), superior rate capability (675 mA h g−1 even at 5.0 A g−1) and a long cycle life (718 mA h g−1 at 2.0 A g−1 after 700 cycles). Therefore, this SnS/MoS2–C composite is a promising candidate as anode material for next-generation high-performance LIBs.

Graphical abstract: MoS2-covered SnS nanosheets as anode material for lithium-ion batteries with high capacity and long cycle life

Supplementary files

Article information

Article type
Paper
Submitted
21 sen 2017
Accepted
29 noy 2017
First published
30 noy 2017

J. Mater. Chem. A, 2018,6, 592-598

MoS2-covered SnS nanosheets as anode material for lithium-ion batteries with high capacity and long cycle life

Q. Pan, F. Zheng, Y. Wu, X. Ou, C. Yang, X. Xiong and M. Liu, J. Mater. Chem. A, 2018, 6, 592 DOI: 10.1039/C7TA08346G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements