Issue 46, 2018

A carbon foam-supported high sulfur loading composite as a self-supported cathode for flexible lithium–sulfur batteries

Abstract

A binder-free, self-supported, flexible cathode is explored for application in flexible lithium–sulfur (Li–S) batteries. The cathode is constructed using nitrogen (N)-doped carbon foam/carbon nanotubes (CNTs) as the scaffold and filled with poly(3,4-ethylenedioxythiophene) (PEDOT)-encapsulated sulfur nanoparticles as the active material. The dense CNTs coated on the skeleton of the 3D N-doped foam enhance flexibility, and the highly conductive CNTs are crossed and twined together to create an interconnected skeleton for rapid electron transport. The conductive PEDOT shell of sulfur nanoparticles and the N-doping of the carbon foams restrain the dissolution of polysulfides through the enhanced chemisorption of lithium polysulfides. The best cathode with a sulfur loading of 2.6 mg cm−2 has an eminent capacity of 1395 mA h g−1 during the initial cycle at 0.1 C. Furthermore, freestanding cathodes are assembled into flexible Li–S batteries, which demonstrate significant achievement at various bending angles. The capacity fading rate is 0.16% per cycle at 30° after 120 cycles. Its high sulfur loading, high capacitance, and good flexibility make this cathode material a promising candidate for potential application in flexible electronics.

Graphical abstract: A carbon foam-supported high sulfur loading composite as a self-supported cathode for flexible lithium–sulfur batteries

Supplementary files

Article information

Article type
Paper
Submitted
30 sen 2018
Accepted
29 okt 2018
First published
30 okt 2018

Nanoscale, 2018,10, 21790-21797

A carbon foam-supported high sulfur loading composite as a self-supported cathode for flexible lithium–sulfur batteries

M. Zhang, K. Amin, M. Cheng, H. Yuan, L. Mao, W. Yan and Z. Wei, Nanoscale, 2018, 10, 21790 DOI: 10.1039/C8NR07964A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements