Issue 10, 2018

Late transition metal recovery from a silver nitrate electrolyte using a phosphine-oxide bearing scavenger

Abstract

Silver is one of the eight precious metals, along with gold and the six platinum-group metals (PGM). Most silver is obtained as a by-product of mining and refining of other metals. Fine silver is produced in electrolytic processes, using silver anodes (electrolytic refining) or inert ones (electrowinning) and an acidified silver nitrate electrolyte. Because the standards for refined silver are very high, it is necessary to control the behaviour of the impurities. Depending on the refining process parameters, it is not uncommon to find precious metals, such as palladium, platinum or even gold, dissolved in the electrolyte. In particular, palladium is very challenging because of its standard oxidation–reduction potential similar to the one of silver Image ID:c7nj04928e-t1.gif. The recovery of palladium and platinum from the silver refining processes is important for two reasons: to produce high quality silver and to recover the valuable precious metals. In this work, Pd and to a lesser extent Pt recovery from a silver nitrate effluent was investigated using a phosphine oxide – bearing coordinating resin (MPX-310). Laboratory scale studies, in batch and continuous modes, have shown the ability of MPX-310 to capture Pd and Pt from a matrix highly concentrated in Ag (up to 131 g l−1) and Cu (up to 70 g l−1) from industrial effluents. Moreover, adiabatic calorimetry studies were performed in order to determine the reactivity of the resin in the silver nitrate effluent and the optimal conditions where this resin can be safely used in an industrial process. Pilot scale experiments were done and the results obtained in the laboratory were confirmed.

Graphical abstract: Late transition metal recovery from a silver nitrate electrolyte using a phosphine-oxide bearing scavenger

Supplementary files

Article information

Article type
Paper
Submitted
12 dek 2017
Accepted
14 fev 2018
First published
15 fev 2018

New J. Chem., 2018,42, 7969-7975

Late transition metal recovery from a silver nitrate electrolyte using a phosphine-oxide bearing scavenger

A. Musina, S. van Zutphen and V. Lavric, New J. Chem., 2018, 42, 7969 DOI: 10.1039/C7NJ04928E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements