Issue 10, 2017

Comparing non-fullerene acceptors with fullerene in polymer solar cells: a case study with FTAZ and PyCNTAZ

Abstract

Non-fullerene acceptors (NFAs) are becoming a serious contender to fullerene-based electron acceptors in organic photovoltaics, due to their structural versatility and easily tunable optical and electronic properties. However, NFA-based solar cells often have a decreased short-circuit current (Jsc) and fill factor (FF) compared to their fullerene-based counterparts. Here, we investigate the fundamental causes of this decrease in the performance of solar cells using a non-fullerene acceptor (SF-PDI2) paired with two polymer donors, FTAZ and PyCNTAZ, compared with their fullerene-based counterparts. Through a number of experimental techniques and morphological studies, we show that the SF-PDI2-based solar cells suffer from insufficient charge generation, transport, and collection when compared with the PCBM-based solar cells. The SF-PDI2-based solar cells show increased bimolecular recombination, which, together with other recombination loss mechanisms in these cells, causes a significant decrease in their Jsc and FF. Notably, the less pure domains, low electron mobility (on the order of 10−5 cm2 V−1 s−1), and imbalanced mobility (in regard to the hole mobility) further explain the low FF. On the other hand, the higher open-circuit voltage (Voc) in the SF-PDI2 devices is mainly due to the increase in the CT state energy. It is worth mentioning that the PyCNTAZ-based devices show an ultralow charge separation energy (ΔECS), close to 0 eV. Our results demonstrate that further increasing the mobility (both of electrons and holes) in these NFA-based solar cells would be a viable approach to further enhance the efficiency of these new types of solar cells, ideally, without losing the high Voc of such cells.

Graphical abstract: Comparing non-fullerene acceptors with fullerene in polymer solar cells: a case study with FTAZ and PyCNTAZ

Supplementary files

Article information

Article type
Paper
Submitted
05 dek 2016
Accepted
01 fev 2017
First published
02 fev 2017

J. Mater. Chem. A, 2017,5, 4886-4893

Comparing non-fullerene acceptors with fullerene in polymer solar cells: a case study with FTAZ and PyCNTAZ

N. Bauer, Q. Zhang, J. Zhao, L. Ye, J. Kim, I. Constantinou, L. Yan, F. So, H. Ade, H. Yan and W. You, J. Mater. Chem. A, 2017, 5, 4886 DOI: 10.1039/C6TA10450A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements