Issue 45, 2017

Two-dimensional transition metal dichalcogenide-based counter electrodes for dye-sensitized solar cells

Abstract

Dye-sensitized solar cells (DSSCs) are gaining considerable interest as alternatives to semiconductor-based thin film solar cells. The noble metal platinum (Pt) is conventionally used as a counter electrode (CE) material for fabricating DSSCs, since Pt is expensive and scarce, therefore, new materials have been explored to develop cost-effective Pt-free counter electrodes. Two-dimensional (2D) graphene-based counter electrodes have achieved the highest power conversion efficiency (PCE, η) of 13%, which has stimulated research activities in 2D layered transition metal dichalcogenides (TMDs) for developing Pt-free DSSCs. In this review, progress made on alternative counter electrodes for fabricating low-cost Pt-free DSSCs, based on earth-abundant 2D TMDs including MoS2, WS2, TiS2, FeS2, CoS2, NiS2, SnS2, MoSe2, NbSe2, TaSe2, NiSe2, FeSe2, CoSe2, Bi2Se3 and their based composites, are discussed and summarized. Also, the considerable progress made on thin films of MoS2 and MoS2 based carbon, graphene, carbon nanotubes (CNTs), carbon nanofibers (CNFs), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) composites as efficient counter electrodes (CEs) for DSSCs are discussed, in terms of their electrochemical and photovoltaic properties. At present, PCE values higher than that of standard Pt CE have been recorded for a number of TMD-based CEs, which include MoS2 and MoSe2/thin films deposited on Mo foil, MoS2/CNTs, MoS2/graphene, MoS2/carbon, MoSe2/PEDOT:PSS, NbSe2, FeS2, FeSe2 nanosheets, TiS2/graphene, and NiS2/graphene hybrid systems in DSSCs, for the reduction of triiodide (I3) to iodide (I). The highest PCE (η = 10.46%) versus Pt CE (η = 8.25%) at 1 Sun (100 mW cm−2, AM 1.5G) was measured for DSSCs having a low cost and flexible CoSe2/carbon-nanoclimbing wall counter electrode deposited on a nickel foam. Though TMD-based materials show great potential for solar cell devices, their long-term stability is equally important. The DSSCs with a TiS2/graphene hybrid, and TiS2/PEDOT:PSS composite CEs, showed stability up to 20 to 30 days, respectively, without any measurable degradation in the photovoltaic performance. The long-term stability of TMDs-based DSSCs under different environmental conditions is also described in view of their commercial applications.

Graphical abstract: Two-dimensional transition metal dichalcogenide-based counter electrodes for dye-sensitized solar cells

Article information

Article type
Review Article
Submitted
28 mar 2017
Accepted
14 may 2017
First published
30 may 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 28234-28290

Two-dimensional transition metal dichalcogenide-based counter electrodes for dye-sensitized solar cells

E. Singh, K. S. Kim, G. Y. Yeom and H. S. Nalwa, RSC Adv., 2017, 7, 28234 DOI: 10.1039/C7RA03599C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements