Issue 7, 2017

Preparation of molecularly imprinted polymeric microspheres based on distillation–precipitation polymerization for an ultrasensitive electrochemical sensor

Abstract

A highly sensitive electrochemical sensor based on a carbon paste electrode (CPE) modified with molecularly imprinted polymeric microspheres (MIPMSs) was developed for the determination of bisphenol A (BPA). For the first time BPA-imprinted MIPMSs were prepared via distillation precipitation polymerization, and then the polymeric microspheres were involved in producing the MIPMS-modified CPE (MIPMS/CPE). The polymers obtained were observed via a scanning electron microscope and its dynamic and static adsorption performances were investigated. Cyclic voltammetry and electrochemical impedance spectroscopy were performed to study the preparation process and electrochemical behavior of the modified carbon paste electrodes with [Fe(CN)6]3−/4− ions acting as electrical indicators. Compared with the bulk MIP packed sensor, the MIPMS/CPE exhibits a higher sensing response and better reproducibility. The detection linear range for BPA is 1 × 10−11–1 × 10−7 M with a detection limit of 2.8 × 10−12 M (S/N = 3) under the optimal experimental conditions. Moreover, the MIPMS/CPE exhibited good selectivity and stability. The developed sensor can determine BPA in real samples including soil, milk and water rapidly and accurately after simple sample pretreatment.

Graphical abstract: Preparation of molecularly imprinted polymeric microspheres based on distillation–precipitation polymerization for an ultrasensitive electrochemical sensor

Supplementary files

Article information

Article type
Paper
Submitted
11 yan 2017
Accepted
23 fev 2017
First published
27 fev 2017

Analyst, 2017,142, 1091-1098

Preparation of molecularly imprinted polymeric microspheres based on distillation–precipitation polymerization for an ultrasensitive electrochemical sensor

Y. Liu, L. Zhang, N. Zhao, Y. Han, F. Zhao, Z. Peng and Y. Li, Analyst, 2017, 142, 1091 DOI: 10.1039/C7AN00059F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements