Issue 1, 2016

Heterogenization of homogenous oxidative desulfurization reaction on graphene-like boron nitride with a peroxomolybdate ionic liquid

Abstract

A peroxomolybdate ionic liquid (PMo IL) was synthesized and further immobilized on graphene-like hexagonal boron nitride (PMo IL/G-h-BN). Compared with the homogenous PMo IL, the heterogeneous catalyst presented an enhanced catalytic and recyclable performance in oxidative desulfurization. The influence of different desulfurization systems, different carriers and reaction conditions indicated that the PMo IL/G-h-BN exhibited a good catalytic activity with hydrogen peroxide as the oxidant in oxidation of dibenzothiophene (DBT). The catalytic activity of PMo IL/G-h-BN shows a superior performance compared to those of other carriers supported with PMo IL catalysts, reaching 98.5% sulfur removal on DBT. This G-h-BN heterogenization of the IL strategy not only reduced the usage amount of IL active species greatly, but also enhanced the recycling performance of the catalyst. The mechanism of adsorption and catalytic oxidative desulfurization was investigated by gas chromatography-mass spectrometry (GC-MS).

Graphical abstract: Heterogenization of homogenous oxidative desulfurization reaction on graphene-like boron nitride with a peroxomolybdate ionic liquid

Supplementary files

Article information

Article type
Paper
Submitted
05 noy 2015
Accepted
07 dek 2015
First published
08 dek 2015

RSC Adv., 2016,6, 140-147

Heterogenization of homogenous oxidative desulfurization reaction on graphene-like boron nitride with a peroxomolybdate ionic liquid

B. Dai, P. Wu, W. Zhu, Y. Chao, J. Sun, J. Xiong, W. Jiang and H. Li, RSC Adv., 2016, 6, 140 DOI: 10.1039/C5RA23272D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements