Issue 23, 2022

FeF3@C nanotube arrays grown on carbon fabric as a free-standing cathode for lithium-ion batteries

Abstract

A self-supported, free-standing, and carbon-wrapped FeF3@C nanotube array was directly fabricated on carbon fiber cloth (CFC) via in situ deposition and etching using a Ni–Co basic carbonate precursor as a template combined with a facile gas fluorination method. X-ray photoelectron spectroscopy and transmission electron microscopy characterization confirms that FeF3@C-CFC has a uniform nanotube structure, which ensures good infiltration of the electrolyte and provides more pathways for Li+/electron transport, thus achieving superior rate capability. Furthermore, the introduction of carbon not only improves the electronic conductivity but also provides a buffer matrix to protect the nanotube structure from destruction. Due to the unique nanotube array, this FeF3@C-CFC cathode possesses a capacity of over 300 mA h g−1 at 0.1 A g−1 after 700 reciprocating cycles and achieves 235 mA h g−1 at 0.4 A g−1 over 300 cycles. FeF3@C-CFC maintains a specific capacity of 676.7, 563.9, 487, 366.6, 250.5 and 123.4 mA h g−1 at 0.1, 0.2, 0.5, 1.0, 2.0 and 5.0 A g−1, respectively. This design strategy opens a window to free-standing cathode fabrication and will promote the development of flexible Li-ion batteries.

Graphical abstract: FeF3@C nanotube arrays grown on carbon fabric as a free-standing cathode for lithium-ion batteries

Supplementary files

Article information

Article type
Research Article
Submitted
06 sen 2022
Accepted
02 okt 2022
First published
03 okt 2022

Mater. Chem. Front., 2022,6, 3512-3521

FeF3@C nanotube arrays grown on carbon fabric as a free-standing cathode for lithium-ion batteries

X. Xu, F. Li, D. Zhang, S. Ji, Y. Huo and J. Liu, Mater. Chem. Front., 2022, 6, 3512 DOI: 10.1039/D2QM00908K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements