Issue 46, 2018

Porous NiCoP in situ grown on Ni foam using molten-salt electrodeposition for asymmetric supercapacitors

Abstract

The construction of in situ grown porous structures can enlarge the contact area between electrodes and electrolyte and shorten the distance for ion diffusion, boosting the electrochemical properties of electrode materials. Herein, we combine molten-salt electrodeposition and AlP-assisted solvothermal phosphorization to design porous NiCoP in situ grown on Ni foam (p-NiCoP/NF). Even with a high mass loading of 10.1 mg cm−2, the as-prepared p-NiCoP/NF exhibits a remarkable mass specific capacity (Qm) of 1279.2 C g−1 (0.99 A g−1) and good rate capability. Furthermore, the p-NiCoP/NF//AC device, assembled using p-NiCoP/NF and active carbon (AC), presents a high energy density of 45.5 W h kg−1 at a power density of 124.2 W kg−1 and superior cycling stability (92.86% retention after 10 000 cycles). Finally, we introduce a four-electrode system to study the effect of the potential window of the positive and negative electrodes in an asymmetric supercapacitor (ASC) on its energy density, where it boosts the energy density and rate capability at the optimal working state.

Graphical abstract: Porous NiCoP in situ grown on Ni foam using molten-salt electrodeposition for asymmetric supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
13 sen 2018
Accepted
31 okt 2018
First published
01 noy 2018

J. Mater. Chem. A, 2018,6, 23746-23756

Porous NiCoP in situ grown on Ni foam using molten-salt electrodeposition for asymmetric supercapacitors

Z. Huang, X. Li, X. Xiang, T. Gao, Y. Zhang and D. Xiao, J. Mater. Chem. A, 2018, 6, 23746 DOI: 10.1039/C8TA08897G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements