Issue 18, 2016

Cyclic azasilanes as volatile and reactive precursors for atomic layer deposition of silicon dioxide

Abstract

A suite of four volatile aminosilanes, cyclic azasilanes, was used to deposit silicon dioxide (SiO2) films by atomic layer deposition (ALD) over the temperature range 100–300 °C by reaction with O3. The unstable Si–N bonding makes the cyclic azasilanes chemically reactive with hydroxyl surfaces through a ring-opening reaction. Subsequent oxidation with O3 affords silanol groups, which are amenable to further reaction with cyclic azasilanes. The influence of azasilane and O3 exposure times on the growth rate was examined in detail. The growth rates obtained by spectroscopic ellipsometry are 0.6–1.2 Å per cycle for various azasilanes under different ALD conditions, due to side chain structure variation of the precursors. Refractive indices (1.45–1.46) and band gaps (8.5–8.7 eV) are found to be similar to thermal oxide. X-Ray photoelectron spectroscopy (XPS) revealed 3–5 at% C and 0.2–0.4 at% N in the films and an O/Si ratio of ∼1.9 when deposited at 190 °C. The first silane pulse resulted in a surface coverage of ∼1.2 molecules per nm2 as determined by microbalance measurements. The O3 oxidation rate is faster for silanes with Si–OMe groups than those with Si–Me functionalities, and less effective at lower temperatures for some silane precursors. These cyclic azasilanes are promising precursors for ALD SiO2 and surface functionalization, and the variation in the structures provides possibilities to study reaction mechanisms and control surface chemistry.

Graphical abstract: Cyclic azasilanes as volatile and reactive precursors for atomic layer deposition of silicon dioxide

Article information

Article type
Paper
Submitted
20 noy 2015
Accepted
13 fev 2016
First published
15 fev 2016

J. Mater. Chem. C, 2016,4, 4034-4039

Cyclic azasilanes as volatile and reactive precursors for atomic layer deposition of silicon dioxide

L. Ju and N. C. Strandwitz, J. Mater. Chem. C, 2016, 4, 4034 DOI: 10.1039/C5TC03896K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements