Multi-step oxidative carboxylation of olefins with carbon dioxide by combining electrochemical and 3D-printed flow reactors

Diego Iglesias, Cristopher Tinajero, Simone Marchetti, Ignazio Roppolo, Marcileia Zanatta and Victor Sans

Green Chem., 2023, 25, 9934
DOI: 10.1039/D3GC03360K

Recent innovations in interfacial strategies for DLP 3D printing process optimization

Lei Wu and Yanlin Song

Mater. Horiz., 2025, 12, 401
DOI: 10.1039/D4MH01160K

3D printed rGO/CNT microlattice aerogel for a dendrite-free sodium metal anode

Jin Yan, Gang Zhi, Dezhi Kong, Hui Wang, Tingting Xu, Jinhao Zang, Weixia Shen, Junmin Xu, Yumeng Shi, Shuge Dai, Xinjian Li and Ye Wang

J. Mater. Chem. A, 2020, 8, 19843
DOI: 10.1039/D0TA05817C

3D-printed capillary force trap reactors (CFTRs) for multiphase catalytic flow chemistry

Stella S. Y. Ng, David M. Walker, Joel M. Hawkins and Saif A. Khan

React. Chem. Eng., 2022, 7, 1297
DOI: 10.1039/D1RE00462J

Compact reactor architectures designed with fractals

Carlos A. Grande

React. Chem. Eng., 2021, 6, 1448
DOI: 10.1039/D1RE00107H

Cold plasma deposited thin-film nanocomposites for heterogeneous thermocatalysis – concepts and progress

Jacek Tyczkowski and Hanna Kierzkowska-Pawlak

Chem. Commun., 2026, 62, 4451
DOI: 10.1039/D5CC07133J

Innovative ZSM-5-based catalyst design via 3D printing for methanol dehydration to DME

V. Koidi, S. Koltsakidis, S. Karakoulia, D. Tzetzis, A. A. Lappas and E. Heracleous

React. Chem. Eng., 2026
DOI: 10.1039/D6RE00015K

From metal–organic framework powders to shaped solids: recent developments and challenges

Bakytzhan Yeskendir, Jean-Philippe Dacquin, Yannick Lorgouilloux, Christian Courtois, Sébastien Royer and Jérémy Dhainaut

Mater. Adv., 2021, 2, 7139
DOI: 10.1039/D1MA00630D

3D-printed pneumatically-stirred parallel reactors for chemical synthesis under high magnetic fields

Chao Sun, Wei Wang, Jusen Guo, Chenghong Zhang, Shijie Hou, Mengzhu Li, Linchen Hu, Yikang Qiang and Zhigao Sheng

React. Chem. Eng., 2026, 11, 839
DOI: 10.1039/D6RE00018E

3D-printed PEEK reactors and development of a complete continuous flow system for chemical synthesis

Florian Menzel, Thomas Klein, Thomas Ziegler and Jochen M. Neumaier

React. Chem. Eng., 2020, 5, 1300
DOI: 10.1039/D0RE00206B

3D-printed monolithic SiCN ceramic microreactors from a photocurable preceramic resin for the high temperature ammonia cracking process

Ki-Won Gyak, Niraj K. Vishwakarma, Yoon-Ho Hwang, Jeehwan Kim, Hui-suk Yun and Dong-Pyo Kim

React. Chem. Eng., 2019, 4, 1393
DOI: 10.1039/C9RE00201D

Insulating 3D-printed templates are turned into metallic electrodes: application as electrodes for glycerol electrooxidation

Katia-Emiko Guima, Victor H. R. Souza and Cauê Alves Martins

RSC Adv., 2019, 9, 15158
DOI: 10.1039/C9RA01436E

Efficient photocatalytic reactors via 3D printing: SLA fabrication and TiO2 hybrid materials

Isabel S. O. Barbosa, Yaidelin A. Manrique, Diana Paiva, Joaquim L. Faria, Ricardo J. Santos and Cláudia G. Silva

RSC Adv., 2025, 15, 2275
DOI: 10.1039/D4RA07121B

3D-printing of attapulgite monoliths with superior low-temperature selective catalytic reduction activity: the influence of thermal treatment

Jie Zhu, Jiangtao Yu, Linhua Zhu, Xiaoxiao Yu, Jixing Liu, Yanhong Chao, Jingzhou Yin, Peiwen Wu, Jian Liu and Wenshuai Zhu

New J. Chem., 2024, 48, 898
DOI: 10.1039/D3NJ04023B

4D synchrotron microtomography and pore-network modelling for direct in situ capillary flow visualization in 3D printed microfluidic channels

Agnese Piovesan, Tim Van De Looverbosch, Pieter Verboven, Clement Achille, Cesar Parra Cabrera, Elodie Boller, Yin Cheng, Rob Ameloot and Bart Nicolai

Lab Chip, 2020, 20, 2403
DOI: 10.1039/D0LC00227E

3D printed nickel catalytic static mixers made by corrosive chemical treatment for use in continuous flow hydrogenation

Milan Kundra, Yutong Zhu, Xuan Nguyen, Darren Fraser, Christian H. Hornung and John Tsanaktsidis

React. Chem. Eng., 2022, 7, 284
DOI: 10.1039/D1RE00456E

Development of customized 3D printed stainless steel reactors with inline oxygen sensors for aerobic oxidation of Grignard reagents in continuous flow

Manuel C. Maier, René Lebl, Philipp Sulzer, Josef Lechner, Torsten Mayr, Matej Zadravec, Eyke Slama, Stefan Pfanner, Christoph Schmölzer, Peter Pöchlauer, C. Oliver Kappe and Heidrun Gruber-Woelfler

React. Chem. Eng., 2019, 4, 393
DOI: 10.1039/C8RE00278A

Rational design of a methanation reactor by neutron imaging

Marin Nikolic, Florian Kiefer, Alessia Cesarini, Ali J. Saadun, Filippo Longo, Pavel Trtik, Markus Strobl and Andreas Borgschulte

Phys. Chem. Chem. Phys., 2025, 27, 9178
DOI: 10.1039/D4CP04086D

Digital flow platform for the synthesis of high-quality multi-material perovskites

Diego Iglesias, Cristopher Tinajero, Simone Marchetti, Jaume Luis-Gómez, Raúl Martinez-Cuenca, Jose F. Fuentes-Ballesteros, Clara A. Aranda, Alejandro Martínez Serra, María C. Asensio, Rafael Abargues, Pablo P. Boix, Marcileia Zanatta and Victor Sans

Digital Discovery, 2025, 4, 1772
DOI: 10.1039/D5DD00099H

Towards greener-by-design fine chemicals. Part 2: technological frontiers

Theodore A. Gazis, Rodolfo I. Teixeira, Giulio Volpin, Ashish Yewale, Mert Can Ince, Mark J. Ford, Jan Harmsen, Marco Uboldi, Alice Melocchi, Mattia Sponchioni, Andrea Aramini, Renzo Luisi, Brahim Benyahia and Gianvito Vilé

Chem. Soc. Rev., 2026, 55, 675
DOI: 10.1039/D5CS00930H

Versatile additively manufactured (3D printed) wall-jet flow cell for high performance liquid chromatography-amperometric analysis: application to the detection and quantification of new psychoactive substances (NBOMes)

Hadil M. Elbardisy, Eduardo M. Richter, Robert D. Crapnell, Michael P. Down, Peter G. Gough, Tarek S. Belal, Wael Talaat, Hoda G. Daabees and Craig E. Banks

Anal. Methods, 2020, 12, 2152
DOI: 10.1039/D0AY00500B

3D-printing for electrolytic processes and electrochemical flow systems

Adriano Ambrosi, Raymond Rong Sheng Shi and Richard D. Webster

J. Mater. Chem. A, 2020, 8, 21902
DOI: 10.1039/D0TA07939A

Rapid fabrication of MOF-based mixed matrix membranes through digital light processing

Alexey Pustovarenko, Beatriz Seoane, Edy Abou-Hamad, Helen E. King, Bert M. Weckhuysen, Freek Kapteijn and Jorge Gascon

Mater. Adv., 2021, 2, 2739
DOI: 10.1039/D1MA00023C

Towards unconstrained catalyst shaping: high accuracy DLP printing of porous γ-Al2O3-based catalysts

Luca Mastroianni, Vincenzo Russo, Kari Eränen, Martino Di Serio, Dmitry Yu. Murzin and Tapio Salmi

Catal. Sci. Technol., 2024, 14, 1336
DOI: 10.1039/D3CY01592K

Trends in additively manufactured microfluidics, microreactors and catalytic materials

Andrea Rogolino and Gianpaolo Savio

Mater. Adv., 2021, 2, 845
DOI: 10.1039/D0MA00704H

Printed aerogels: chemistry, processing, and applications

Junzong Feng, Bao-Lian Su, Hesheng Xia, Shanyu Zhao, Chao Gao, Lukai Wang, Osarenkhoe Ogbeide, Jian Feng and Tawfique Hasan

Chem. Soc. Rev., 2021, 50, 3842
DOI: 10.1039/C9CS00757A

Additive manufacturing of microstructured reactors for organometallic catalytic reactions

Franco Otaola, Stéphane Mottelet, Erwann Guénin, Denis Luart and Mikel Leturia

Lab Chip, 2023, 23, 702
DOI: 10.1039/D2LC00816E

Tuning the catalytic acidity in Al2O3 nanofibers with mordenite nanocrystals for dehydration reactions

M. A. Rodriguez-Olguin, R. N. Cruz-Herbert, H. Atia, M. Bosco, E. L. Fornero, R. Eckelt, D. A. De Haro Del Río, A. Aguirre, J. G. E. Gardeniers and A. Susarrey-Arce

Catal. Sci. Technol., 2022, 12, 4243
DOI: 10.1039/D2CY00143H

Boosting New Electrochemical Reactor Designs to Improve the Performance in H2O2 Production Using Gas Diffusion Electrodes

Taynara Oliveira Silva, Rafael Granados-Fernández, Justo Lobato, Marcos R. V. Lanza and Manuel Andrés Rodrigo

ACS Sustainable Chem. Eng., 2025, 13, 3172
DOI: 10.1021/acssuschemeng.4c08826

Single-step fabrication of electrochemical flow cells utilizing multi-material 3D printing

Glen D. O'Neil, Shakir Ahmed, Kevin Halloran, Jordyn N. Janusz, Alexandra Rodríguez and Irina M. Terrero Rodríguez

Electrochemistry Communications, 2019, 99, 56
DOI: 10.1016/j.elecom.2018.12.006

Investigation on optimal active layer thickness and pore size in dual-layer NH3-SCR monolith for low SO2 oxidation by numerical simulation

Qi Xin, Zhesheng Hua, Yujie Fu, Yang Yang, Shaojun Liu, Hao Song, Xinning Yu, Lifeng Xiao, Chenghang Zheng and Xiang Gao

Fuel, 2020, 279, 118420
DOI: 10.1016/j.fuel.2020.118420

Direct 3D Printing of Graphene Nanoplatelet/Silver Nanoparticle‐Based Nanocomposites for Multiaxial Piezoresistive Sensor Applications

Sung‐Nam Kwon, Seung‐Woo Kim, Il‐Gu Kim, Young Kyu Hong and Seok‐In Na

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800500

3D-printed polyamide structures coated with TiO2 nanoparticles, towards a 360-degree rotating photocatalytic reactor

Mathieu Grandcolas and Anna Lind

Materials Letters, 2022, 307, 131044
DOI: 10.1016/j.matlet.2021.131044

Glycerol Is Converted into Energy and Carbonyl Compounds in a 3D-Printed Microfluidic Fuel Cell: In Situ and In Operando Bi-Modified Pt Anodes

Matheus B. C. de Souza, Katia-Emiko Guima, Pablo S. Fernández and Cauê A. Martins

ACS Appl. Mater. Interfaces, 2022, 14, 25457
DOI: 10.1021/acsami.2c04313

Deployable and Retrievable 3D-Printed Zeolite–Polymer Composites for Wastewater Treatment: A Review

Tomi Setiawan, Giovanno Alvin Setiadi and Rino Rakhmata Mukti

Ind. Eng. Chem. Res., 2023, 62, 18159
DOI: 10.1021/acs.iecr.3c02317

2022 roadmap on 3D printing for energy

Albert Tarancón, Vincenzo Esposito, Marc Torrell, Marcel Di Vece, Jae Sung Son, Poul Norby, Sourav Bag, Patrick S Grant, A Vogelpoth, S Linnenbrink, M Brucki, T Schopphoven, A Gasser, Elif Persembe, Dionysia Koufou, Simon Kuhn, Rob Ameloot, Xu Hou, Kurt Engelbrecht, Christian R H Bahl, Nini Pryds, Jie Wang, Costas Tsouris, Eduardo Miramontes, Lonnie Love, Canhai Lai, Xin Sun, Martin Ryhl Kærn, Gennaro Criscuolo and David Bue Pedersen

J. Phys. Energy, 2022, 4, 011501
DOI: 10.1088/2515-7655/ac483d

3D-printed electrode an affordable sensor for sulfanilamide monitoring in breast milk, synthetic urine, and pharmaceutical formulation samples

Thalles Pedrosa Lisboa, Guilherme Figueira Alves, Lucas Vinícius de Faria, Cassiano Cunha de Souza, Maria Auxiliadora Costa Matos and Renato Camargo Matos

Talanta, 2022, 247, 123610
DOI: 10.1016/j.talanta.2022.123610

ChannelCOMB Device for Mesostructured Reactors and Networks of Reactors

Isabel S. O. Barbosa, João M. Costa, Yaidelin A. Manrique, Madalena M. Dias, Joaquim L. Faria, Ricardo J. Santos, Cláudia G. Silva and Margarida S. C. A. Brito

Chem Eng & Technol, 2023, 46, 1241
DOI: 10.1002/ceat.202200560

Ceramic Foams with Controlled Geometries Through 3D‐Printed Sacrificial Templates

Elif Persembe, Cesar Parra-Cabrera and Rob Ameloot

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202300076

Hydrodynamics of limestone in gas-solid micro-fluidized beds

P. Asiedu-Boateng, N.Y. Asiedu, G.-S. Patience, J.R. McDonough and V. Zivkovic

Chemical Engineering Research and Design, 2025, 219, 283
DOI: 10.1016/j.cherd.2025.06.014

Mehr als nur ein Netzwerk: Strukturierung retikulärer Materialien im Nano‐, Meso‐ und Volumenbereich

Frederik Haase, Patrick Hirschle, Ralph Freund, Shuhei Furukawa, Zhe Ji and Stefan Wuttke

Angewandte Chemie, 2020, 132, 22534
DOI: 10.1002/ange.201914461

Additive manufacturing of flow field plates for polymer electrolyte membrane fuel cells: Scopes, challenges, and future prospects towards sustainable mobility

Aqib Fayaz, Rajkumar Velu, Arunkumar Jayakumar and B. Mallikarjuna

Journal of Power Sources, 2026, 666, 239070
DOI: 10.1016/j.jpowsour.2025.239070

3D Printing for Electrochemical Energy Applications

Michelle P. Browne, Edurne Redondo and Martin Pumera

Chem. Rev., 2020, 120, 2783
DOI: 10.1021/acs.chemrev.9b00783

Fused deposition processing polycaprolactone of composites for biomedical applications

Arya Prasad and Balasubramanian Kandasubramanian

Polymer-Plastics Technology and Materials, 2019, 58, 1365
DOI: 10.1080/25740881.2018.1563117

Mass transfer intensification by modifying structured packing surface properties produced with 3D foam-printing technology

D. Flagiello, S.G. Acierno, D. Tammaro, A. Erto, P.L. Maffettone, A. Lancia and F.Di Natale

Separation and Purification Technology, 2025, 376, 133911
DOI: 10.1016/j.seppur.2025.133911

3D printing – Present and future – A Chemical Engineering perspective

Isabel Diañez Amores, Joamin González-Gutiérrez, I. Martínez García, José M. Franco and Críspulo Gallegos

Chemical Engineering Research and Design, 2022, 187, 598
DOI: 10.1016/j.cherd.2022.08.049

A Review on New 3-D Printed Materials’ Geometries for Catalysis and Adsorption: Paradigms from Reforming Reactions and CO2 Capture

Ahmad Soliman, Nahla AlAmoodi, Georgios N. Karanikolos, Charalabos C. Doumanidis and Kyriaki Polychronopoulou

Nanomaterials, 2020, 10, 2198
DOI: 10.3390/nano10112198

Production of Block Catalysts for Carbon Monoxide Oxidation Using Additive Technologies

O. A. Cheremisina, M. M. Sychev, A. S. Dolgin, T. A. Vishnevskaya, N. V. Mal’tseva and A. S. Volobueva

Glass Phys Chem, 2024, 50, 31
DOI: 10.1134/S1087659623601247

Rheological and microstructural characterization of titania pastes for additive manufacturing using polymeric ceramic precursor as organic and inorganic binder

Anderson Luis Barbosa, Roberto Cesar de Oliveira Romano, André Avancini Bernardes and Douglas Gouvêa

Ceramics International, 2025, 51, 24072
DOI: 10.1016/j.ceramint.2025.03.093

Chitosan-polylactic acid composites: from seafood waste to advanced functional materials for 3D printing

Erika Blanzeanu, Minodora Marin, Marian Nicolae Verziu, Anca Dumitru, Bogdan Stefan Vasile, Cristina Stavarache, Derniza-Elena Cozorici, Rafael Luque, Catalin Zaharia and Ionut-Cristian Radu

Adv Compos Hybrid Mater, 2025, 8
DOI: 10.1007/s42114-024-01131-x

3D-printed highly porous and reusable chitosan monoliths for Cu(II) removal

Dongxing Zhang, Junfeng Xiao, Qiuquan Guo and Jun Yang

J Mater Sci, 2019, 54, 6728
DOI: 10.1007/s10853-019-03332-y

Emerging trends in flow chemistry enabled by 3D printing: Robust reactors, biocatalysis and electrochemistry

Victor Sans

Current Opinion in Green and Sustainable Chemistry, 2020, 25, 100367
DOI: 10.1016/j.cogsc.2020.100367

(Bio)Analytical chemistry enabled by 3D printing: Sensors and biosensors

C. Lorena Manzanares Palenzuela and Martin Pumera

TrAC Trends in Analytical Chemistry, 2018, 103, 110
DOI: 10.1016/j.trac.2018.03.016

A 3D Printer in the Lab: Not Only a Toy

Vittorio Saggiomo

Advanced Science, 2022, 9
DOI: 10.1002/advs.202202610

Polymer based flow field plates for polymer electrolyte membrane fuel cell and the scope of additive manufacturing: A techno‐economic review

Dinesh Kumar Madheswaran, Arunkumar Jayakumar, Rajkumar Velu, Rajendran Raj and Edwin Geo Varuvel

Intl J of Energy Research, 2022, 46, 19737
DOI: 10.1002/er.8645

Emerging soft medical robots for clinical translations from diagnosis through therapy to rehabilitation

Guanghai Fei, Shuaizhong Zhang, Yue Li, Miao Peng, Zhenyuan Tang, Xinyue Gu, Xiaopeng Li, Kaihuan Zhang, Jinbing Xie, Yicheng Ni, Kun Zhou and Min Tu

Materials Science and Engineering: R: Reports, 2025, 165, 100990
DOI: 10.1016/j.mser.2025.100990

Ni-Al2O3 supported on metallic 3D-printed monolith with TPMS structure applied in the dry and steam reforming of methane

Débora Morais Bezerra, Arthur Alvarez Mascheroni, Victória Gonçalves Ferreira Pereira, Clara Vilela Weikert, Rodrigo de Paiva Floro Bonfim, Ricardo Tadeu Lopes, José Maria Mascheroni and Fabio Souza Toniolo

Materials Research Bulletin, 2026, 195, 113855
DOI: 10.1016/j.materresbull.2025.113855

Influence of internal and external surface area on impregnation and activity of 3D printed catalyst carriers

Paula F. Großmann, Markus Tonigold, Normen Szesni, Richard W. Fischer, Alexander Seidel, Klaus Achterhold, Franz Pfeiffer and Bernhard Rieger

Catalysis Communications, 2023, 175, 106610
DOI: 10.1016/j.catcom.2023.106610

Research status of laser additive manufacturing for metal: a review

Guanghao Gong, Jiajia Ye, Yiming Chi, Zhihuan Zhao, Zifan Wang, Guang Xia, Xueyun Du, Hongfang Tian, Huijun Yu and Chuanzhong Chen

Journal of Materials Research and Technology, 2021, 15, 855
DOI: 10.1016/j.jmrt.2021.08.050

Fluidization in small-scale gas-solid 3D-printed fluidized beds

J.R. McDonough, R. Law, D.A. Reay and V. Zivkovic

Chemical Engineering Science, 2019, 200, 294
DOI: 10.1016/j.ces.2019.01.048

3D printed CuZnAl2O3-based catalysts for direct CO2 hydrogenation to DME, optimization and scale up

Yoran De Vos, Arie J.J. Koekkoek, Giuseppe Bonura, Serena Todaro, Monika Kus, Alexander Vansant, Gijsbert Gerritsen, Catia Cannilla, Hendrikus C.L. Abbenhuis and Vesna Middelkoop

Materials Science and Engineering: B, 2024, 310, 117759
DOI: 10.1016/j.mseb.2024.117759

Beyond Frameworks: Structuring Reticular Materials across Nano‐, Meso‐, and Bulk Regimes

Frederik Haase, Patrick Hirschle, Ralph Freund, Shuhei Furukawa, Zhe Ji and Stefan Wuttke

Angew Chem Int Ed, 2020, 59, 22350
DOI: 10.1002/anie.201914461

Additive Manufacturing and Chemical Engineering: Looking for Synergies from a Bibliometric Study

Rodrigo Estévez, Esteban Quijada-Maldonado, Julio Romero and Ricardo Abejón

Applied Sciences, 2025, 15, 2962
DOI: 10.3390/app15062962

The art of manufacturing molecules

Christian H. Hornung

Science, 2018, 359, 273
DOI: 10.1126/science.aar4543

Ionic liquids for 3D printing: Fabrication, properties, applications

Khan Rajib Hossain, Pan Jiang, Xinle Yao, Xingxing Yang, Danli Hu and Xiaolong Wang

Journal of Ionic Liquids, 2023, 3, 100066
DOI: 10.1016/j.jil.2023.100066

3D-Printed Hermetic Alumina Housings

Max Eickenscheidt, Michael Langenmair, Ahmad Dbouk, Dorit Nötzel, Thomas Hanemann and Thomas Stieglitz

Materials, 2021, 14, 200
DOI: 10.3390/ma14010200

Metal–organic framework mixed-matrix coatings on 3D printed devices

Andreu Figuerola, Deyber A.V. Medina, Alvaro J. Santos-Neto, Carlos Palomino Cabello, Víctor Cerdà, Gemma Turnes Palomino and Fernando Maya

Applied Materials Today, 2019, 16, 21
DOI: 10.1016/j.apmt.2019.04.011

Recent advances and challenges in solid sorbents for CO2 capture

Hamid Zentou, Bosirul Hoque, Mahmoud A. Abdalla, Ahmed F. Saber, Omar Y. Abdelaziz, Mansur Aliyu, Abdullah M. Alkhedhair, Abdullah J. Alabduly and Mahmoud M. Abdelnaby

Carbon Capture Science & Technology, 2025, 15, 100386
DOI: 10.1016/j.ccst.2025.100386

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Yirong Feng, Hongfeng Mu, Xi Liu, Zhengliang Huang, Haomiao Zhang, Jingdai Wang and Yongrong Yang

Ind. Eng. Chem. Res., 2020, 59, 8447
DOI: 10.1021/acs.iecr.0c01509

Rotating photocatalytic activity of TiO2 nanotubes grown on 3D-printed titanium alloy structures

Mathieu Grandcolas, Anna Lind and Carlos Grande

Materials Research Bulletin, 2025, 188, 113407
DOI: 10.1016/j.materresbull.2025.113407

Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration

Lisha Zhu, Dan Luo and Yan Liu

Int J Oral Sci, 2020, 12
DOI: 10.1038/s41368-020-0073-y

Optimal conditions for Pt-catalyzed microfluidic synthesis of iodoolefins

A. N. Bulgakov, A. S. Gogil’chin, Mahmoud E. A. Eid, A. A. Tereshchenko, N. V. Egil, T. V. Krasnyakova, I. O. Krasniakova, A. V. Soldatov, A. A. Guda and S. A. Mitchenko

J Flow Chem, 2025, 15, 197
DOI: 10.1007/s41981-025-00358-z

Integrating Reactors and Catalysts through Three‐Dimensional Printing: Efficiency and Reusability of an Impregnated Palladium on Silica Monolith in Sonogashira and Suzuki Reactions

Antonio S. Díaz‐Marta, Susana Yañez, Eliana Lasorsa, Patricia Pacheco, Carmen R. Tubío, José Rivas, Yolanda Piñeiro, Manuel A. Gonzalez Gómez, Manuel Amorín, Francisco Guitián and Alberto Coelho

ChemCatChem, 2020, 12, 1762
DOI: 10.1002/cctc.201902143

Fabricating a Structured Single‐Atom Catalyst via High‐Resolution Photopolymerization 3D Printing

Jiachengjun Luo, Vincenzo Ruta, Ik Seon Kwon, Jody Albertazzi, Nicolò Allasia, Oleksii Nevskyi, Valentina Busini, Davide Moscatelli and Gianvito Vilé

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202404794

Manufacturing and Application of 3D Printed Photo Fenton Reactors for Wastewater Treatment

Kourosh Nasr Esfahani, Mohammad Damous Zandi, J. Antonio Travieso-Rodriguez, Moisès Graells and Montserrat Pérez-Moya

IJERPH, 2021, 18, 4885
DOI: 10.3390/ijerph18094885

Flexible distillation test rig on a laboratory scale for characterization of additively manufactured packings

Johannes Neukäufer, Nadin Sarajlic, Harald Klein, Sebastian Rehfeldt, Heiko Hallmann, Carsten Knösche and Thomas Grützner

AIChE Journal, 2021, 67
DOI: 10.1002/aic.17381

SMART‐Reactors: Tailoring Gas Holdup Distribution by Additively Manufactured Lattice Structures

Claas Spille, Anastasios Lyberis, Maria Isabelle Maiwald, Dirk Herzog, Marko Hoffmann, Claus Emmelmann and Michael Schlüter

Chem Eng & Technol, 2020, 43, 2053
DOI: 10.1002/ceat.202000211

Tuning the Mechanical Properties of 3D‐printed Objects by the RAFT Process: From Chain‐Growth to Step‐Growth

Xiaofeng Pan, Jiajia Li, Zhuang Li, Qing Li, Xiangqiang Pan, Zhengbiao Zhang and Jian Zhu

Angewandte Chemie, 2024, 136
DOI: 10.1002/ange.202318564

Application of Fused Filament Fabrication in Preparation of Ceramic Monolithic Catalysts for Oxidation of Gaseous Mixture of Volatile Aromatic Compounds

Filip Car, Dominik Horvatić, Vesna Tomašić, Domagoj Vrsaljko and Zoran Gomzi

Catalysts, 2025, 15, 677
DOI: 10.3390/catal15070677

3D-Printed Templates Converted into Graphite, Ruthenium, or Copper Are Used as Monolithic Sensors

Glinka L. D. Estadulho, Leticia M. Alencar, Katia-Emiko Guima, Magno A. G. Trindade and Cauê A. Martins

ACS Appl. Electron. Mater., 2021, 3, 3482
DOI: 10.1021/acsaelm.1c00437

Stereolithographic 3D printing of graded porous materials via an integrated digital exposure and selective dissolution strategy

Guanghai Fei, Cesar Parra-Cabrera, Yi Li, Dmitry E. Kravchenko, Ruben Dochy, Lore Van Looy and Rob Ameloot

Cell Reports Physical Science, 2023, 4, 101504
DOI: 10.1016/j.xcrp.2023.101504

Applied research on methane steam reforming properties of porous structural catalyst fabricated by selective laser melting technology

Xinghua Liang, Mingzhao Wei, Dongdong Dong, LingXiao Lan, Ge Yan, Xingchen Yan, Yujiang Wang, Jianglong Yi, Cheng Chang and Min Liu

Mater. Res. Express, 2024, 11, 016521
DOI: 10.1088/2053-1591/ad1ef8

High-resolution 3D printable inks based on functional polymeric ionic liquids for applications in carbon dioxide valorization

Simone Marchetti, Cristopher Tinajero, Gianluca Palmara, Eduardo García-Verdugo, Ignazio Roppolo, Marcileia Zanatta and Victor Sans

Additive Manufacturing, 2024, 89, 104304
DOI: 10.1016/j.addma.2024.104304

Hierarchically-Structured Ti/TiO₂ Electrode for Hydrogen Evolution Synthesized via 3D Printing and Anodization

Xiang Li, Yuan Xue, Ryan Dehoff, Costas Tsouris and Patricia Taboada-Serrano

J Energ Power Technol, 2020, 02, 1
DOI: 10.21926/jept.2002007

Optimization of Laser Based-Powder Bed Fusion Parameters for Controlled Porosity in Titanium Alloy Components

Emanuele Vaglio, Federico Scalzo, Marco Sortino, Giovanni Totis, Roberto Cremonese, Massimiliano Boccia and Maila Danielis

Materials, 2024, 17, 5572
DOI: 10.3390/ma17225572

Applicability of Selected 3D Printing Materials in Electrochemistry

Marta Choińska, Vojtěch Hrdlička, Hana Dejmková, Jan Fischer, Luděk Míka, Eva Vaněčková, Viliam Kolivoška and Tomáš Navrátil

Biosensors, 2022, 12, 308
DOI: 10.3390/bios12050308

3D printing enhanced catalysis for energy conversion and environment treatment

Jipeng Chen, Penghui Wu, Fan Bu, Yong Gao, Xiangye Liu and Cao Guan

DeCarbon, 2023, 2, 100019
DOI: 10.1016/j.decarb.2023.100019

Continuous-Flow Catalytic Degradation of Hexacyanoferrate Ion through Electron Transfer Induction in a 3D-Printed Flow Reactor

Oluwatayo Racheal Onisuru, Oyekunle Azeez Alimi, Kariska Potgieter and Reinout Meijboom

J. of Materi Eng and Perform, 2021, 30, 4891
DOI: 10.1007/s11665-021-05527-4

Freeform Microfluidic Networks Encapsulated in Laser‐Printed 3D Macroscale Glass Objects

Zijie Lin, Jian Xu, Yunpeng Song, Xiaolong Li, Peng Wang, Wei Chu, Zhenhua Wang and Ya Cheng

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.201900989

Calibration‐Free Chemical Process and Quality Control Units as Enablers for Modular Production

Martin Bornemann‐Pfeiffer, Simon Kern, Michael Maiwald and Klas Meyer

Chemie Ingenieur Technik, 2021, 93, 62
DOI: 10.1002/cite.202000150

From Grayscale Photopolymerization 3D Printing to Functionally Graded Materials

Guanghai Fei, Cesar Parra‐Cabrera, Kuo Zhong, Koen Clays and Rob Ameloot

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202314635

Mobile hydrogen reformers as a novel approach to decarbonise the transport sector

John Chiefari and Christian Hornung

Current Opinion in Chemical Engineering, 2021, 34, 100756
DOI: 10.1016/j.coche.2021.100756

Spectroscopic Reactor for Operando Investigations Made by Additive Manufacturing for High‐Pressure Catalysis Applications

Mariam L. Schulte, Vera Truttmann, Lorena Baumgarten, Alexander G. Nicolai, Diego A. Montalvo Beltran, Florian J. Summ, Christoph Kiener, Erisa Saraçi and Jan‐Dierk Grunwaldt

Chemistry Methods, 2026, 6
DOI: 10.1002/cmtd.202500105

Additive manufactured metal lattice structures used as flow-through electrodes in a filter-press electrochemical reactor

F. Chauvet, P. Lohmuller, P. Laheurte, K. Groenen Serrano and T. Tzedakis

Chemical Engineering Journal, 2024, 490, 151641
DOI: 10.1016/j.cej.2024.151641

3D Printed Electrodes for Improved Gas Reactant Transport for Electrochemical Reactions

Tânia Machado Benedetti, Andrew Nattestad, Adam C. Taylor, Stephen Beirne and Gordon G. Wallace

3D Printing and Additive Manufacturing, 2018, 5, 215
DOI: 10.1089/3dp.2017.0108

Unlocking 3D printing technology for microalgal production and application

Han Sun, Qian Gong, Yuwei Fan, Yuxin Wang, Jia Wang, Changliang Zhu, Haijin Mou, Shufang Yang and Jin Liu

Adv. Biotechnol., 2024, 2
DOI: 10.1007/s44307-024-00044-6

Exploring the potential usage of 3D printed membranes combined with PVDF coating in direct contact membrane distillation

Miaomiao Tian, Hellen De Coninck, Junyong Zhu, Yatao Zhang, Shushan Yuan, Brecht Van Hooreweder, Peter Van Puyvelde and Bart Van der Bruggen

Desalination, 2021, 513, 115134
DOI: 10.1016/j.desal.2021.115134

Combining Functional Prototyping of 3D Printed Reactors with a Modular Reactor Setup for Continuous Emulsion Polymerization

Kristina M. Zentel, Andreas Reinbeck, Christian Deckert, Werner Pauer and Gerrit A. Luinstra

Chemie Ingenieur Technik, 2022, 94, 1105
DOI: 10.1002/cite.202200005

3D-printed electrochemical platform with multi-purpose carbon black sensing electrodes

Habdias A. Silva-Neto, Anderson A. Dias and Wendell K. T. Coltro

Microchim Acta, 2022, 189
DOI: 10.1007/s00604-022-05323-4

3D‐Structured Monoliths of Nanoporous Polymers by Additive Manufacturing

Sebastian Hock and Marcus Rose

Chemie Ingenieur Technik, 2020, 92, 525
DOI: 10.1002/cite.201900149

A Comprehensive Review on Graphitic Carbon Nitride for Carbon Dioxide Photoreduction

Javid Khan, Yanyan Sun and Lei Han

Small Methods, 2022, 6
DOI: 10.1002/smtd.202201013

Modelling and simulation of catalytic ammonia decomposition over Ni-Ru deposited on 3D-printed CeO2

Ilaria Lucentini, Germán García Colli, Carlos Luzi, Isabel Serrano, Lluís Soler, Núria J. Divins, Osvaldo Miguel Martínez and Jordi Llorca

Chemical Engineering Journal, 2022, 427, 131756
DOI: 10.1016/j.cej.2021.131756

Scalable, process-oriented beam lattices: Generation, characterization, and compensation for open cellular structures

Ian R. Woodward and Catherine A. Fromen

Additive Manufacturing, 2021, 48, 102386
DOI: 10.1016/j.addma.2021.102386

3d-Printing of Adsorbents for Increased Productivity in Carbon Capture Applications (3d-Caps)

Soraya Sluijter, Jurriaan Boon, Jebin James, Shreenath Krishnamurthy, Anna Lind, Kari Anne Andreassen, Richard Blom, Ana Maria Cormos, Vlad Sandu and Robert de Boer

SSRN Journal, 2021
DOI: 10.2139/ssrn.3811591

Wireless Electrochemical Reactor for Accelerated Exploratory Study of Electroorganic Synthesis

Jie Chen and Yiming Mo

ACS Cent. Sci., 2023, 9, 1820
DOI: 10.1021/acscentsci.3c00856

Continuous Flow Hydrogenation of Flavorings and Fragrances Using 3D-Printed Catalytic Static Mixers

Milan Kundra, Tom Grall, Derrick Ng, Zongli Xie and Christian H. Hornung

Ind. Eng. Chem. Res., 2021, 60, 1989
DOI: 10.1021/acs.iecr.0c05671

3D printing of flexible batteries for wearable electronics

Hao Yang, Haiqiu Fang, Wanli Wang, Dongqing Zhang, Jiexin Zhu, Kuo Chen, Yi Sun, Peixiang Wang, Qiang Zhou, Chao Qi, Bin Wang and Mingbo Wu

Journal of Power Sources, 2024, 602, 234350
DOI: 10.1016/j.jpowsour.2024.234350

Rapid Prototyping for Photochemical Reaction Engineering

Fabian Guba, Ümit Tastan, Katrin Gugeler, Melanie Buntrock, Tobias Rommel and Dirk Ziegenbalg

Chemie Ingenieur Technik, 2019, 91, 17
DOI: 10.1002/cite.201800035

Automated and dynamic extrusion pressure adjustment based on real-time flow rate measurements for precise ink dispensing in 3D bioprinting

Lukas Wenger, Svenja Strauß and Jürgen Hubbuch

Bioprinting, 2022, 28, e00229
DOI: 10.1016/j.bprint.2022.e00229

Getting Chemical and Biochemical Engineers Excited about Additive Manufacturing

Fabian Grinschek, Bradley Ladewig, Alexander Navarrete Munoz, Christoph Klahn and Roland Dittmeyer

Chemie Ingenieur Technik, 2022, 94, 931
DOI: 10.1002/cite.202200010

Study of methane upgrading using an activated carbon 3D-printed adsorbent

Ana Pereira, Alexandre F.P. Ferreira, Alírio Rodrigues, Ana Mafalda Ribeiro and Maria João Regufe

Journal of Environmental Chemical Engineering, 2024, 12, 111730
DOI: 10.1016/j.jece.2023.111730

Photocurable resin-silica composites with low thermal expansion for 3D printing microfluidic components onto printed circuit boards

Guanghai Fei, Lei Nie, Lipeng Zhong, Qimin Shi, Kehui Hu, Cesar Parra-Cabrera, Herman Oprins, Rob Ameloot and Shoufeng Yang

Materials Today Communications, 2022, 31, 103482
DOI: 10.1016/j.mtcomm.2022.103482

3D printing in photocatalysis: Methods and capabilities for the improved performance

Jhon Mauricio Aguirre-Cortés, Adriana Isabel Moral-Rodríguez, Esther Bailón-García, Arantxa Davó-Quiñonero, Agustín Francisco Pérez-Cadenas and Francisco Carrasco-Marín

Applied Materials Today, 2023, 32, 101831
DOI: 10.1016/j.apmt.2023.101831

Pore network model for permeability characterization of three-dimensionally-printed porous materials for passive microfluidics

Agnese Piovesan, Clement Achille, Rob Ameloot, Bart Nicolai and Pieter Verboven

Phys. Rev. E, 2019, 99
DOI: 10.1103/PhysRevE.99.033107

Additive Manufacturing of Functional Microarchitected Reactors for Energy, Environmental, and Biological Applications

Seok Kim, Do Hyeog Kim, Wonpyo Kim, Young Tae Cho and Nicholas X. Fang

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2021, 8, 303
DOI: 10.1007/s40684-020-00277-5

Scalable 3D‐printed lattices for pressure control in fluid applications

Ian R. Woodward, Lucas Attia, Premal Patel and Catherine A. Fromen

AIChE Journal, 2021, 67
DOI: 10.1002/aic.17452

A facile and rapid fabrication strategy of 3D-printed monolithic carbonaceous adsorbents for adsorptive desulfurization of fuel

Jie Zhu, Jiangtao Yu, Daolin Du, Peng Cui, Peiwen Wu, Mingqing Hua, Yan Huang, Suhang Xun, Huaming Li and Wenshuai Zhu

Carbon, 2025, 242, 120458
DOI: 10.1016/j.carbon.2025.120458

3D printing synthesis of catalysts

Xianhui Zhao, Canan Karakaya, Moriko Qian, Rongge Zou, Weijie Zhang, Zhou Lu, Debtanu Maiti, Avik Samanta, Weiming Wan, Xiangbei Liu, Anisia Tiplea, Yan Li, Shaoqing Cui, Chenxi Wang, Hanwu Lei, Sherith Bankston, Sefa Yilmaz, Jingguang G. Chen and Soydan Ozcan

Materials Today Sustainability, 2024, 26, 100746
DOI: 10.1016/j.mtsust.2024.100746

Potential of metal monoliths with grown carbon nanomaterials as catalyst support in intensified steam reformer: a perspective

Luqmanulhakim Baharudin, Alex Chi-Kin Yip, Vladimir Golovko and Matthew James Watson

Reviews in Chemical Engineering, 2020, 36, 459
DOI: 10.1515/revce-2018-0007

Performances of a Y-type structured packing produced by 3D foam-printing for the intensification of gas absorption processes

D. Flagiello, D. Tammaro, A. Erto, P.L. Maffettone, A. Lancia and F. Di Natale

Chemical Engineering Research and Design, 2023, 195, 637
DOI: 10.1016/j.cherd.2023.06.008

Production of Customized Reactors by 3D Printing for Corrosive and Exothermic Reactions

Carlos A. Grande and Terje Didriksen

Ind. Eng. Chem. Res., 2021, 60, 16720
DOI: 10.1021/acs.iecr.1c02791

Solvent‐Free Hydrogenation of Squalene Using Parts per Million Levels of Palladium Supported on Carbon Nanotubes: Shift from Batch Reactor to Continuous‐Flow System

Boris Guicheret, Laurent Vanoye, Camila Rivera‐Cárcamo, Claude de Bellefon, Philippe Serp, Régis Philippe and Alain Favre‐Réguillon

ChemSusChem, 2022, 15
DOI: 10.1002/cssc.202200916

FOMSy: 3D-printed flexible open-source microfluidic system and flow synthesis of PET-tracer

Florian Menzel, Jonathan Cotton, Thomas Klein, Andreas Maurer, Thomas Ziegler and Jochen M. Neumaier

J Flow Chem, 2023, 13, 247
DOI: 10.1007/s41981-023-00267-z

Coarse-Grained Models for Scale-Up of Structured Reactors

Arun S. Sundaramoorthy, Raul F. Lobo and Dionisios G. Vlachos

Ind. Eng. Chem. Res., 2025, 64, 14110
DOI: 10.1021/acs.iecr.5c01707

Performance Evaluation and Scale-Up Behavior of an Engineered In-Line Mixer for 3D Printing

Yirong Feng, Haomiao Zhang, Jingdai Wang and Yongrong Yang

Ind. Eng. Chem. Res., 2021, 60, 11568
DOI: 10.1021/acs.iecr.1c02320

Analysis of the possibility of using additive technologies in basic parts manufacturing

Alexander Vorobyov, Tamara Bunkova, Konstantin Averkov, I. Tanaino and T. Dzholdosheva

E3S Web of Conf., 2023, 402, 10021
DOI: 10.1051/e3sconf/202340210021

Continuous Flow Biocatalytic Reductive Amination by Co‐Entrapping Dehydrogenases with Agarose Gel in a 3D‐Printed Mould Reactor

Federico Croci, Jan Vilím, Theodora Adamopoulou, Vasilis Tseliou, Peter J. Schoenmakers, Tanja Knaus and Francesco G. Mutti

ChemBioChem, 2022, 23
DOI: 10.1002/cbic.202200549

Functionalization of 3D-Printed Plastics for the Photocatalytic Removal of Organic Pollutants in Air

Manuel J. Dopazo, Claudio Passal韆, Marina J. Flores, Marisol D. Labas and Rodolfo J. Brandi

Photocatalysis: Research and Potential, 2025, 2, 10002
DOI: 10.70322/prp.2025.10002

Revolutionizing Lab‐Scale Electrochemical Reactors: Innovative Breakthroughs With 3D Printing Fabrication

Rafael Granados‐Fernández, Andrea Cárdenas‐Arenas and Miguel A. Montiel

ChemElectroChem, 2024, 11
DOI: 10.1002/celc.202400205

Revolutionizing catalytic water treatment: A critical review on the role of 3D printed catalysts

Ning Li, Yitong Wang, Xianglin Chang, Wenjie Gao, Lingchao Kong, Beibei Yan and Guanyi Chen

Separation and Purification Technology, 2025, 363, 132194
DOI: 10.1016/j.seppur.2025.132194

Bioinspired monolithic catalyst support based on triply periodic minimal surfaces for catalytic microreactors: A case study of hydrogen production

Jiaxuan Li, Yang Yang, Xun Zhu, Dingding Ye and Qiang Liao

International Journal of Hydrogen Energy, 2024, 93, 1143
DOI: 10.1016/j.ijhydene.2024.11.038

3D‐Printed Acidic Monolithic Catalysts for Liquid‐Phase Catalysis with Enhanced Mass Transfer Properties

Sebastian Hock, Christof Rein and Marcus Rose

ChemCatChem, 2022, 14
DOI: 10.1002/cctc.202101947

A perspective on the current and future roles of additive manufacturing in process engineering, with an emphasis on heat transfer

J.R. McDonough

Thermal Science and Engineering Progress, 2020, 19, 100594
DOI: 10.1016/j.tsep.2020.100594

Coil-in-Coil Reactor: Augmenting Plug Flow Performance by Combining Different Geometric Features Using 3D Printing

Jonathan R. McDonough, Jessica Armett, Richard Law and Adam P. Harvey

Ind. Eng. Chem. Res., 2019, 58, 21363
DOI: 10.1021/acs.iecr.9b04239

Engineered material-binding peptide empowers biocatalysis in stainless steel flow reactors for phosphate recovery

Yi Lu, Florian Bourdeaux, Binbin Nian, Pirathiha Manimaran, Bhupesh Verma, Max Rommerskirchen, Sebastian Bold, Leilei Zhu, Yu Ji, Johannes Henrich Schleifenbaum and Ulrich Schwaneberg

Chem, 2025, 11, 102395
DOI: 10.1016/j.chempr.2024.102395

Customizable Heterogeneous Catalysts: Nonchanneled Advanced Monolithic Supports Manufactured by 3D-Printing for Improved Active Phase Coating Performance

Cristian Y. Chaparro-Garnica, Pepe Jordá-Faus, Esther Bailón-García, Raúl Ocampo-Pérez, Carlos G. Aguilar-Madera, Arantxa Davó-Quiñonero, Dolores Lozano-Castelló and Agustín Bueno-López

ACS Appl. Mater. Interfaces, 2020, 12, 54573
DOI: 10.1021/acsami.0c14703

Direct-ink writing 3D printed energy storage devices: From material selectivity, design and optimization strategies to diverse applications

Jin Yan, Shaozhuan Huang, Yew Von Lim, Tingting Xu, Dezhi Kong, Xinjian Li, Hui Ying Yang and Ye Wang

Materials Today, 2022, 54, 110
DOI: 10.1016/j.mattod.2022.03.014

Development of a manufacturing process for Binder Jet 3D printed porous Al2O3 supports used in heterogeneous catalysis

Hanh My Bui, Richard Fischer, Normen Szesni, Markus Tonigold, Klaus Achterhold, Franz Pfeiffer and Olaf Hinrichsen

Additive Manufacturing, 2022, 50, 102498
DOI: 10.1016/j.addma.2021.102498

Powder-precursor integrated 3D-printed TiO2 photocatalyst and adsorption-degradation synergy effect

Cuixia Li, Yuhang Zhang, Chenxi Qiu, Bo Yuan, Ruilin Zhang, Wensheng Li and Haize Jin

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2023, 671, 131570
DOI: 10.1016/j.colsurfa.2023.131570

Continuous synthesis of a silver-based primary explosive with high purity

Haibin Xu, Chang Xu, Yuting Zheng, Dezhi Zhang, Haomiao Zhang, Jingdai Wang and Yongrong Yang

Chemical Engineering Science, 2024, 300, 120634
DOI: 10.1016/j.ces.2024.120634

3D structured materials and devices for artificial photosynthesis

Han Zhou, Chengyu Xiao, Zhiwei Yang and Yijia Du

Nanotechnology, 2020, 31, 282001
DOI: 10.1088/1361-6528/ab85ea

Recent Progress and Perspectives of Direct Ink Writing Applications for Mass Transfer Enhancement in Gas‐Phase Adsorption and Catalysis

Qiwei Chen, Enze Tian, Yan Wang, Jinhan Mo, Guiyin Xu and Meifang Zhu

Small Methods, 2023, 7
DOI: 10.1002/smtd.202201302

Process intensification and energy transition: A necessary coupling?

Emanuele Moioli

Chemical Engineering and Processing - Process Intensification, 2022, 179, 109097
DOI: 10.1016/j.cep.2022.109097

Hierarchically Porous TiO2 Photocatalyst Prepared by Additive Manufacturing and Dealloying for Highly Efficient Photocatalytic Degradation of Tetracycline

Yu Wei, Meng Chen, Sheng Guo, Yao Li, Zhenyu Zhang, Yin Xie, Chao Cai and Qingsong Wei

ACS EST Water, 2024, 4, 1590
DOI: 10.1021/acsestwater.3c00675

Technological Innovations in Photochemistry for Organic Synthesis: Flow Chemistry, High-Throughput Experimentation, Scale-up, and Photoelectrochemistry

Laura Buglioni, Fabian Raymenants, Aidan Slattery, Stefan D. A. Zondag and Timothy Noël

Chem. Rev., 2022, 122, 2752
DOI: 10.1021/acs.chemrev.1c00332

One-pot fabrication of an efficient 3D porous SiC based monolithic catalyst for methanol steam reforming via a carbon encapsulation strategy

Zaizhe Cheng, Lingjie He, Xiucheng Sun, Yunzhi Li, Xianglei He, Guojun Lan, Yiyang Qiu and Ying Li

Chemical Engineering Journal, 2024, 488, 151094
DOI: 10.1016/j.cej.2024.151094

Photocatalytic NOx removal with TiO2-impregnated 3D-printed PET supports

G.F. Binetti Basterrechea, V.N. Montesinos and N. Quici

Heliyon, 2023, 9, e22635
DOI: 10.1016/j.heliyon.2023.e22635

Heterogeneous catalysis in microreactors with nanofluids for fine chemicals syntheses: Benzylation of toluene with benzyl chloride over silica-immobilized FeCl3 catalyst

Xin Pu and Yuanhai Su

Chemical Engineering Science, 2018, 184, 200
DOI: 10.1016/j.ces.2018.03.049

Strategies for Engineering High‐Performance PGM‐Free Catalysts toward Oxygen Reduction and Evolution Reactions

Lei Du, Lixin Xing, Gaixia Zhang, Marc Dubois and Shuhui Sun

Small Methods, 2020, 4
DOI: 10.1002/smtd.202000016

Structured nanoporous Cu/ZnO catalysts for on-board methanol steam reforming prepared by laser powder bed fusion and dealloying

Chuandong Li, XinQi Yao, Ruhang Zhang, HongXiang Zheng, Shuaishuai Yuan, Xinhai Yu, Bo Li, Minghui Zhu and Shan-Tung Tu

Chemical Engineering Journal, 2024, 487, 150467
DOI: 10.1016/j.cej.2024.150467

DLP 3D printing of alumina catalyst architectures: Design, kinetics and modeling of structure effects on catalyst performance

Luca Mastroianni, Ananias De Jesus Medina Ferrer, Anna Maria De Domenico, Kari Eränen, Martino Di Serio, Dmitry Murzin, Vincenzo Russo and Tapio Salmi

Chemical Engineering Journal, 2024, 501, 157691
DOI: 10.1016/j.cej.2024.157691

Recent developments in 3D-printed membranes for water desalination

Jinlong He, Tianle Yue, Jeffrey R McCutcheon and Ying Li

J. Phys. Energy, 2024, 6, 012002
DOI: 10.1088/2515-7655/ad0d01

Tandem catalytic approaches for CO2 enriched Fischer-Tropsch synthesis

Rubén Blay-Roger, Muhammad Asif Nawaz, Francisco M. Baena-Moreno, Luis F. Bobadilla, Tomas R. Reina and José A. Odriozola

Progress in Energy and Combustion Science, 2024, 103, 101159
DOI: 10.1016/j.pecs.2024.101159

Fabricating Bioactive 3D Metal–Organic Framework Devices

Ruhani Singh, Guillaume Souillard, Lucile Chassat, Yuan Gao, Xavier Mulet and Cara M. Doherty

Advanced Sustainable Systems, 2020, 4
DOI: 10.1002/adsu.202000059

In the Framework of Global Trade, Sustainability and Industry Demand for Innovative Process and Technologies, what kind of Modern “Green” Chemical Engineering is Required for the Design of “the Factory of the Future”?

Jean-Claude Charpentier

Int. J. Petrol. Technol., 2019, 6, 7
DOI: 10.15377/2409-787X.2019.06.2

Development of a 3D-Printable, Porous, and Chemically Active Material Filled with Silica Particles and its Application to the Fabrication of a Microextraction Device

Dagmara Szynkiewicz, Szymon Ulenberg, Paweł Georgiev, Aleksander Hejna, Barbara Mikolaszek, Tomasz Bączek, Gino V. Baron, Joeri F. M. Denayer, Gert Desmet and Mariusz Belka

Anal. Chem., 2023, 95, 11632
DOI: 10.1021/acs.analchem.3c01263

Precise 2D‐Patterned Incompatible Catalysts for Reactions in One‐Pot

Martin O. Pretscher, Tingting Chen, Gabriel Sitaru, Stephan Gekle, Jian Ji and Seema Agarwal

Chemistry A European J, 2019, 25, 13640
DOI: 10.1002/chem.201903486

Digital and lean development method for 3D-printed reactors based on CAD modeling and CFD simulation

Sven Bettermann, Felix Kandelhard, Hans-Ulrich Moritz and Werner Pauer

Chemical Engineering Research and Design, 2019, 152, 71
DOI: 10.1016/j.cherd.2019.09.024

Intensification of solvent extraction in an additively manufactured microfluidic separator

Jad George Touma, Matthew Coblyn, Lucas Joseph Freiberg, Cliff Kowall, Avaline Zoebelein and Goran Nadezda Jovanovic

Chemical Engineering Journal, 2024, 484, 149285
DOI: 10.1016/j.cej.2024.149285

Modelling of heat transfer and pressure drop during flow boiling of CO2 in a horizontal tube with periodic open cellular inserts

Jonas Bender, Konrad Dubil, Franz Korn, Thomas Wetzel and Benjamin Dietrich

Chemical Engineering and Processing - Process Intensification, 2024, 203, 109891
DOI: 10.1016/j.cep.2024.109891

3D printed ceramics as solid supports for enzyme immobilization: an automated DoE approach for applications in continuous flow

Alessia Valotta, Manuel C. Maier, Sebastian Soritz, Magdalena Pauritsch, Michael Koenig, Dominik Brouczek, Martin Schwentenwein and Heidrun Gruber-Woelfler

J Flow Chem, 2021, 11, 675
DOI: 10.1007/s41981-021-00163-4

Preliminary modelling as the first stage of targeted organic synthesis

Ilya Yu. Titov, Viktor S. Stroylov, PolinaV. Rusina and Igor V. Svitanko

Russ. Chem. Rev., 2021, 90, 831
DOI: 10.1070/RCR5012

Advanced application of a geometry-enhanced 3D-printed catalytic reformer for syngas production

José Juan Bolívar Caballero, Tong Han, Rikard Svanberg, Ilman Nuran Zaini, Hanmin Yang, Ritambhara Gond, Pengcheng Cao, Thomas Lewin, Pär G. Jönsson and Weihong Yang

Energy Conversion and Management, 2023, 287, 117071
DOI: 10.1016/j.enconman.2023.117071

Fabrication of arbitrary three-dimensional suspended hollow microstructures in transparent fused silica glass

Frederik Kotz, Patrick Risch, Karl Arnold, Semih Sevim, Josep Puigmartí-Luis, Alexander Quick, Michael Thiel, Andrei Hrynevich, Paul D. Dalton, Dorothea Helmer and Bastian E. Rapp

Nat Commun, 2019, 10
DOI: 10.1038/s41467-019-09497-z

Innovative method for the preparation of catalytic surfaces: The application of microorganisms for the deposition of nanoparticles on supports

Monika Golda-Cepa, Wojciech Pajerski, Joanna Duch, Magdalena Jarosz, Paulina Indyka, Miroslawa Pawlyta, Dorota Ochonska, Monika Brzychczy-Wloch, Zbigniew Sojka and Andrzej Kotarba

Applied Surface Science, 2021, 553, 149573
DOI: 10.1016/j.apsusc.2021.149573

Utilization of Iron Foam as Structured Catalyst for Fischer–Tropsch Synthesis

Yira Victoria Hurtado, Ghazal Azadi, Eduardo Lins de Barros Neto and Jean-Michel Lavoie

Fuels, 2025, 6, 60
DOI: 10.3390/fuels6030060

Liquid flow behavior in a multiliquid-inlet rotating packed bed reactor with three-dimensional printed packing

Wei Wu, Yong Luo, Guang-Wen Chu, Meng-Jun Su, Yong Cai, Hai-Kui Zou and Jian-Feng Chen

Chemical Engineering Journal, 2020, 386, 121537
DOI: 10.1016/j.cej.2019.04.117

On the 3D printed catalyst for biomass-bio-oil conversion: Key technologies and challenges

Vahid Haseltalab, Animesh Dutta and Sheng Yang

Journal of Catalysis, 2023, 417, 286
DOI: 10.1016/j.jcat.2022.12.013

Packed Periodic Open Cellular Structures – an Option for the Intensification of Non-Adiabatic Catalytic Processes

Matteo Ambrosetti, Gianpiero Groppi, Wilhelm Schwieger, Enrico Tronconi and Hannsjörg Freund

Chemical Engineering and Processing - Process Intensification, 2020, 155, 108057
DOI: 10.1016/j.cep.2020.108057

Additive manufacturing technologies applied to the electrochemical valorization of biomass

Gianluca Palmara, David Carvajal, Marcileia Zanatta, Elena Mas-Marza and Victor Sans

Current Research in Green and Sustainable Chemistry, 2023, 7, 100386
DOI: 10.1016/j.crgsc.2023.100386

The applications of 3D printing in catalysis

Jindan Tian, Lili Liu, Hongqiang Nian, Ting Chen, Yanlin Jiang, Na Sha, Renli Fu and Zhe Zhao

Catalysis Reviews, 2025, 1
DOI: 10.1080/01614940.2025.2556095

3D Printing of Mixed Matrix Films Based on Metal–Organic Frameworks and Thermoplastic Polyamide 12 by Selective Laser Sintering for Water Applications

Rui Li, Shangqin Yuan, Wang Zhang, Han Zheng, Wei Zhu, Boyuan Li, Meixin Zhou, Adrian Wing-Keung Law and Kun Zhou

ACS Appl. Mater. Interfaces, 2019, 11, 40564
DOI: 10.1021/acsami.9b11840

A Scientist’s Guide to Buying a 3D Printer: How to Choose the Right Printer for Your Laboratory

Joshua J. Tully and Gabriel N. Meloni

Anal. Chem., 2020, 92, 14853
DOI: 10.1021/acs.analchem.0c03299

Fabrication of Porous Hydrogenation Catalysts by a Selective Laser Sintering 3D Printing Technique

Elmeri Lahtinen, Lotta Turunen, Mikko M. Hänninen, Kalle Kolari, Heikki M. Tuononen and Matti Haukka

ACS Omega, 2019, 4, 12012
DOI: 10.1021/acsomega.9b00711

Scalable 3D Printed Microlattices of Bimetallic Transition Metal/Metal Oxide Electrocatalysts

Anand P. Tiwari, Jake E. Patterson, Md Saifur Rahman and William J. Scheideler

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202500122

Electrified catalytic steam reforming for renewable syngas production: Experimental demonstration, process development and techno-economic analysis

José Juan Bolívar Caballero, Ilman Nuran Zaini, Anissa Nurdiawati, Irina Fedorova, Pengcheng Cao, Thomas Lewin, Pär G. Jönsson and Weihong Yang

Applied Energy, 2025, 377, 124556
DOI: 10.1016/j.apenergy.2024.124556

3D printed cross-scale structured TS-1 catalysts for continuous scale-up reactions

Cunbao Huo, Zhengping Qiu, Zhenni Wei, Xiaoyong Tian, Xin Huang, Yang Nan, Yongsheng Xiang, Rongjiang Zhang, Zhiqiang Wu and Dichen Li

Additive Manufacturing, 2024, 80, 103962
DOI: 10.1016/j.addma.2024.103962

A Mini-Review on Applications of 3D Printing for Microbial Electrochemical Technologies

Tae Hyun Chung and Bipro Ranjan Dhar

Front. Energy Res., 2021, 9
DOI: 10.3389/fenrg.2021.679061

Novel concept for 3D-printed, baffled micro-fluidized beds for the regulation of bubble behavior and the suppression of solid back-mixing: Experiments and simulations

Zhuojun Jiang, Shuyao Xiong, Nouria Fatah, Chao Yang and Lei Yang

Chemical Engineering Science, 2024, 299, 120490
DOI: 10.1016/j.ces.2024.120490

Engineering 3D Pd/AC catalysts for the continuous production of hydrogen from formic acid

Celia Martin, Irene Diaz-Herrezuelo, Marina Navarro, Isabel Sanz-Abengozar, Jose A. Casas, Manuel Belmonte and Asuncion Quintanilla

International Journal of Hydrogen Energy, 2025, 170, 151197
DOI: 10.1016/j.ijhydene.2025.151197

Design of additively manufactured methanol conversion reactor for high throughput production

Dongsheng Li, Tom Maloney, Nasir Mannan and Seyed Niknam

Mat Design & Process Comms, 2021, 3
DOI: 10.1002/mdp2.143

The Data-Driven Performance Prediction of Lattice Structures: The State-of-the-Art in Properties, Future Trends, and Challenges

Siyuan Yang, Ning Dai and Qianfeng Cao

Aerospace, 2025, 12, 390
DOI: 10.3390/aerospace12050390

Recent advances in additive manufacturing for solid adsorbent materials in carbon capture

Lei Tan, Binpeng Yu, Cunbao Huo, Xuanzhi Hao, Zhun Hu, Tao Xie, Xiaoyong Tian, Bolun Yang and Zhiqiang Wu

Additive Manufacturing Frontiers, 2025, 4, 200253
DOI: 10.1016/j.amf.2025.200253

Gas–liquid and liquid–liquid vortex technology for process intensification

Afroditi Kourou, Siyuan Chen and Yi Ouyang

Current Opinion in Chemical Engineering, 2024, 46, 101056
DOI: 10.1016/j.coche.2024.101056

Fabrication of metal-organic framework architectures with macroscopic size: A review

Javier Fonseca and Tenghua Gong

Coordination Chemistry Reviews, 2022, 462, 214520
DOI: 10.1016/j.ccr.2022.214520

Aerobic oxidation of hydroxymethylfurfural using a homogeneous TEMPO/TBN catalytic system in 3D-printed milli-scale porous reactors

Dionysia Koufou, Jorid Smets, Rob Ameloot and Simon Kuhn

J Flow Chem, 2023, 13, 169
DOI: 10.1007/s41981-023-00264-2

Three‐dimensional printing of high‐mass loading electrodes for energy storage applications

Hao Yang, Zhaoxuan Feng, Xiaoling Teng, Lu Guan, Han Hu and Mingbo Wu

InfoMat, 2021, 3, 631
DOI: 10.1002/inf2.12181

A review on additive manufacturing and materials for catalytic applications: Milestones, key concepts, advances and perspectives

O.H. Laguna, P.F. Lietor, F.J. Iglesias Godino and F.A. Corpas-Iglesias

Materials & Design, 2021, 208, 109927
DOI: 10.1016/j.matdes.2021.109927

3D printing quasi-solid-state micro-supercapacitors with ultrahigh areal energy density based on high concentration MXene sediment

Mengmeng Yuan, Libo Wang, Xuqing Liu, Xinyan Du, Gaobin Zhang, Yukai Chang, Qixun Xia, Qianku Hu and Aiguo Zhou

Chemical Engineering Journal, 2023, 451, 138686
DOI: 10.1016/j.cej.2022.138686

Thermochemical upcycling of plastic waste: A comprehensive view from technology to commercialization

Jechan Lee, Seonguk Heo, Doeun Choi and Ki-Hyun Kim

Materials Science and Engineering: R: Reports, 2026, 168, 101170
DOI: 10.1016/j.mser.2025.101170

Enabling intensification of multiphase chemical processes with additive manufacturing

Robert E. McMillin, Adam R. Luxon and James K. Ferri

Advances in Colloid and Interface Science, 2020, 285, 102294
DOI: 10.1016/j.cis.2020.102294

Low-budget 3D-printed equipment for continuous flow reactions

Jochen M Neumaier, Amiera Madani, Thomas Klein and Thomas Ziegler

Beilstein J. Org. Chem., 2019, 15, 558
DOI: 10.3762/bjoc.15.50

Depletion Flocculation of High Internal Phase Pickering Emulsion Inks: A Colloidal Engineering Approach to Develop 3D Printed Porous Scaffolds with Tunable Bioactive Delivery

Mahdiyar Shahbazi, Henry Jäger, Delphine Huc-Mathis, Peyman Asghartabar Kashi, Rammile Ettelaie, Anwesha Sarkar and Jianshe Chen

ACS Appl. Mater. Interfaces, 2024, 16, 43430
DOI: 10.1021/acsami.4c11035

Additively Manufactured Zirconia-Supported Indium Oxide Catalysts and Their Performance in Direct Methanol Synthesis

Emiliano S. Dal Molin, Mudassar Javed, Georg Brösigke, Maik Alexander Rudolph, Jens-Uwe Repke, Reinhard Schomäcker, Ulla Simon, Maged F. Bekheet and Aleksander Gurlo

Ind. Eng. Chem. Res., 2025, 64, 1032
DOI: 10.1021/acs.iecr.4c03439

Heterolayered carbon allotrope architectonics via multi-material 3D printing for advanced electrochemical devices

Mario Palacios-Corella, Michela Sanna, José Muñoz, Kalyan Ghosh, Stefan Wert and Martin Pumera

Virtual and Physical Prototyping, 2023, 18
DOI: 10.1080/17452759.2023.2276260

Chemistry from 3D printed objects

Matthew R. Hartings and Zeeshan Ahmed

Nat Rev Chem, 2019, 3, 305
DOI: 10.1038/s41570-019-0097-z

Emerging electrochemical additive manufacturing technology for advanced materials: Structures and applications

Hafsa Siddiqui, Netrapal Singh, Palash Naidu, Koyalada Bhavani Srinivas Rao, Shaily Gupta, Avanish Kumar Srivastava, M.S. Santosh, Sathish Natarajan, Surender Kumar, Ludovic F. Dumée and Sami Rtimi

Materials Today, 2023, 70, 161
DOI: 10.1016/j.mattod.2023.10.008

Visual depiction and numerical characterization of intricate flow in triply periodic minimal surface foams

Jiaxuan Li, Yang Yang, Xun Zhu, Dingding Ye, Rong Chen and Qiang Liao

Physics of Fluids, 2024, 36
DOI: 10.1063/5.0215608

Nature inspired fractal tree-like photobioreactor via 3D printing for CO2 capture by microaglae

Luhaibo Zhao, Gaofeng Zeng, Yu Gu, Zhiyong Tang, Gang Wang, Tao Tang, Ying Shan and Yuhan Sun

Chemical Engineering Science, 2019, 193, 6
DOI: 10.1016/j.ces.2018.08.057

Hydrodynamics and mass transfer of gas–liquid flow in micropacked bed reactors with metal foam packing

Le Sang, Jiacheng Tu, Han Cheng, Guangsheng Luo and Jisong Zhang

AIChE Journal, 2020, 66
DOI: 10.1002/aic.16803

3D-Printed Plastic Windows for Photoelectrochemical Applications

Sarah C. Galarza-Perez, Maximiliano J. M. Zapata, Cinthia Zanata, Cicero Cena, Heberton Wender and Cauê A. Martins

ACS Appl. Polym. Mater., 2025, 7, 3925
DOI: 10.1021/acsapm.5c00207

Advances in design of internals: Applications in conventional and process intensification units

Siyuan Chen, Jonas Verding, Xiaojun Lang, Yi Ouyang, Geraldine J. Heynderickx and Kevin M. Van Geem

Chemical Engineering and Processing - Process Intensification, 2024, 201, 109806
DOI: 10.1016/j.cep.2024.109806

Biomass valorization using 3D-printed catalysts

Sathiyamoorthy Murugesan, Vlad Andrei Neacșu, Minodora Maria Marin, Ionuț-Cristian Radu, Derniza-Elena Cozorici, Erika Blânzeanu, Cătălin Zaharia, Kelvin Adrian Sanoja-Lopez, Rafael Luque and Marian Nicolae Verziu

Commun Chem, 2025, 9
DOI: 10.1038/s42004-025-01835-1

3D Printed Microlattices of Transition Metal/Metal Oxides for Highly Stable and Efficient Water Splitting

Anand P. Tiwari, Md Saifur Rahman and William J. Scheideler

Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202400160

Review on Additive Manufacturing of Catalysts and Sorbents and the Potential for Process Intensification

Leon R.S. Rosseau, Vesna Middelkoop, Hans A.M. Willemsen, Ivo Roghair and Martin van Sint Annaland

Front. Chem. Eng., 2022, 4
DOI: 10.3389/fceng.2022.834547

Three-Dimensional-Printed Core–Shell Structured MFI-Type Zeolite Monoliths for Volatile Organic Compound Capture under Humid Conditions

Shuang Wang, Pu Bai, Yingzhen Wei, Wei Liu, Xiaoyu Ren, Junli Bai, Zhiming Lu, Wenfu Yan and Jihong Yu

ACS Appl. Mater. Interfaces, 2019, 11, 38955
DOI: 10.1021/acsami.9b13819

Fully 3D printing of carbon black-thermoplastic hybrid materials and fast activation for development of highly stable electrochemical sensors

Habdias A. Silva-Neto, Murilo Santhiago, Lucas C. Duarte and Wendell K.T. Coltro

Sensors and Actuators B: Chemical, 2021, 349, 130721
DOI: 10.1016/j.snb.2021.130721

Advances in Metal 3D Printing Technology for Tailored Self‐Catalytic Reactor Design

Hyo‐Jin Kim, Kohsuke Mori, Takayoshi Nakano and Hiromi Yamashita

ChemCatChem, 2024, 16
DOI: 10.1002/cctc.202301380

3D-printing of adsorbents for increased productivity in carbon capture applications (3D-CAPS)

S.N. Sluijter, J. Boon, J. James, S. Krishnamurthy, A. Lind, R. Blom, K.A. Andreassen, A.M. Cormos, V.C. Sandu and R. de Boer

International Journal of Greenhouse Gas Control, 2021, 112, 103512
DOI: 10.1016/j.ijggc.2021.103512

Periodic Open Cellular Structures in Chemical Engineering: Application in Catalysis and Separation Processes

Lisa Eckendörfer, Dominik Rudolf, Andreas Brix, Marion Börnhorst and Hannsjörg Freund

Annual Review of Chemical and Biomolecular Engineering, 2024, 15, 163
DOI: 10.1146/annurev-chembioeng-101121-085630

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

Guido Gambacorta, James S Sharley and Ian R Baxendale

Beilstein J. Org. Chem., 2021, 17, 1181
DOI: 10.3762/bjoc.17.90

3D-printed structured catalysts for CO2 methanation reaction: Advancing of gyroid-based geometries

Miriam González-Castaño, Francisco Baena-Moreno, Juan Carlos Navarro de Miguel, Kamal U.M. Miah, Fátima Arroyo-Torralvo, Ralf Ossenbrink, Jose Antonio Odriozola, Walther Benzinger, Andreas Hensel, Achim Wenka and Harvey Arellano-García

Energy Conversion and Management, 2022, 258, 115464
DOI: 10.1016/j.enconman.2022.115464

Oxidative coupling of carbon monoxide to dimethyl oxalate: catalysts design, reaction mechanism and process intensification

Chunzheng Wang, Xianchao Li, Shicheng Yuan, Li Sun, Peng Bai, Lixia Ling, Hailing Guo and Svetlana Mintova

Catalysis Reviews, 2025, 67, 323
DOI: 10.1080/01614940.2024.2320165

Hierarchically Structured Components: Design, Additive Manufacture, and Their Energy Applications

Panfeng Wang, Jin Xuan, Ronghao Zhang, Hao Zhang, Qiang Wang, Haoyang Wang, Houli Liu and Li Zhang

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202100672

Novel combination of 3D-printing and electrochemical deposition to design and prepare metallic honeycomb supported catalysts for dry reforming of methane

O. Bazta, F.J. Botana, J.J. Calvino, M.A. Cauqui, J.M. Gatica, H. Vidal, L. González-Rovira, J. López-Castro, M.P. Yeste, G. Blanco and J.C. Hernández-Garrido

Chemical Engineering Journal, 2025, 506, 159939
DOI: 10.1016/j.cej.2025.159939

Binder-jetting 3D printer capable of voxel-based control over deposited ink volume, adaptive layer thickness, and selective multi-pass printing

E. Persembe, C. Parra-Cabrera, C. Clasen and R. Ameloot

Review of Scientific Instruments, 2021, 92
DOI: 10.1063/5.0072715

3D-Printed Porous GO Framework Enabling Dendrite-Free Lithium-Metal Anodes

Yang Yang, Liufeng Ai, Shunzhi Yu, Juhong He, Tiezhu Xu, Duo Chen and Laifa Shen

ACS Appl. Energy Mater., 2022, 5, 15666
DOI: 10.1021/acsaem.2c03267

3D printing of TiO2 nano particles containing macrostructures for As(III) removal in water

Dingyi Wang, Tingting Zhi, Lihong Liu, Li Yan, Wei Yan, Yinyin Tang, Bin He, Ligang Hu, Chuanyong Jing and Guibin Jiang

Science of The Total Environment, 2022, 815, 152754
DOI: 10.1016/j.scitotenv.2021.152754

Additive manufacturing of functional devices for environmental applications: A review

Ana Paula Fagundes, Jéssica Oliveira de Brito Lira, Natan Padoin, Cíntia Soares and Humberto Gracher Riella

Journal of Environmental Chemical Engineering, 2022, 10, 108049
DOI: 10.1016/j.jece.2022.108049

Effect of 3D printing process parameters on the mechanical properties of silica/polyethyleneimine composites using direct‐ink writing

Hui Feng, Shuo Wang, Yanjun Cui, Yongsheng Xiang, Xiaofei Liu, Xiaoliang Sun, Wenli Zhang and Peng Tu

Polymer Composites, 2023, 44, 7687
DOI: 10.1002/pc.27656

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

Vesna Middelkoop, Antonis Vamvakeros, Dieter de Wit, Simon D.M. Jacques, Simge Danaci, Clement Jacquot, Yoran de Vos, Dorota Matras, Stephen W.T. Price and Andrew M. Beale

Journal of CO2 Utilization, 2019, 33, 478
DOI: 10.1016/j.jcou.2019.07.013

Effectiveness of the 3D-printing procedure in the synthesis of hybrid catalysts for the direct hydrogenation of CO2 into dimethyl ether

G. Bonura, S. Todaro, V. Middelkoop, Y. de Vos, H.C.L. Abbenhuis, G. Gerritsen, A.J.J. Koekkoek, C. Cannilla and F. Frusteri

Journal of CO2 Utilization, 2023, 70, 102458
DOI: 10.1016/j.jcou.2023.102458

Recent progress in additive manufacturing of porous titanium: From design to applications

Haoxin Song, Chen Wang, Wenzheng Yu, Mingsen Zhang, Jinqiang Shao, Hanwen Liang, Tingting Wu and Xiaoxiao Dong

Journal of Alloys and Compounds, 2025, 1026, 180451
DOI: 10.1016/j.jallcom.2025.180451

Improved electrochemical detection of metals in biological samples using 3D-printed electrode: Chemical/electrochemical treatment exposes carbon-black conductive sites

Diego P. Rocha, André L. Squissato, Sarah M. da Silva, Eduardo M. Richter and Rodrigo A.A. Munoz

Electrochimica Acta, 2020, 335, 135688
DOI: 10.1016/j.electacta.2020.135688

Electronic biopolymers: From molecular engineering to functional devices

Xiaoqian Li, Changshuai Ding, Xiaomeng Li, Huige Yang, Shuiren Liu, Xianghong Wang, Linlin Zhang, Qingqing Sun, Xuying Liu and Jinzhou Chen

Chemical Engineering Journal, 2020, 397, 125499
DOI: 10.1016/j.cej.2020.125499

Recent Advances in Structured Catalysts Preparation and Use in Water-Gas Shift Reaction

Vincenzo Palma, Concetta Ruocco, Marta Cortese and Marco Martino

Catalysts, 2019, 9, 991
DOI: 10.3390/catal9120991

High-throughput multi-resolution three dimensional laser printing

Yuanxin Tan, Wei Chu, Peng Wang, Wenbo Li, Jia Qi, Jian Xu, Zhanshan Wang and Ya Cheng

Phys. Scr., 2019, 94, 015501
DOI: 10.1088/1402-4896/aaec99

3D Printed Reactors for Synthesis of Active Pharmaceutical Ingredients in Continuous Flow

Manuel C. Maier, Alessia Valotta, Katharina Hiebler, Sebastian Soritz, Kristian Gavric, Bianca Grabner and Heidrun Gruber-Woelfler

Org. Process Res. Dev., 2020, 24, 2197
DOI: 10.1021/acs.oprd.0c00228

3D-printed packed bed reactor for continuous catalytic hydrogenation of nitroaromatic compounds

Piotr Cyganowski, Włodzimierz Tylus, Sebastian Kinas and Piotr Jamróz

Chemical Engineering and Processing - Process Intensification, 2025, 208, 110141
DOI: 10.1016/j.cep.2024.110141

Scalable 3D printing of aperiodic cellular structures by rotational stacking of integral image formation

Seok Kim, Jordan J. Handler, Young Tae Cho, George Barbastathis and Nicholas X. Fang

Sci. Adv., 2021, 7
DOI: 10.1126/sciadv.abh1200

Product Design and Engineering in Chemical Engineering: Past, Present State, and Future

Jens Uhlemann, Raquel Costa and Jean-Claude Charpentier

Chem Eng & Technol, 2019, 42, 2258
DOI: 10.1002/ceat.201900236

A brief introduction of electrode fabrication for proton exchange membrane water electrolyzers

Xinlong Lin, Justin Zhu Yeow Seow and Zhichuan J Xu

J. Phys. Energy, 2023, 5, 034003
DOI: 10.1088/2515-7655/acccb1

A critical review on 3D-printed adsorbents, membranes, and catalysts for carbon dioxide capture, separation, and conversion

Kedar Bharat Jivrakh, Suresh Kuppireddy, Ludovic F. Dumée, Kyriaki Polychronopoulou, Rashid K. Abu Al-Rub, Nahla Alamoodi and Georgios N. Karanikolos

Journal of Cleaner Production, 2024, 472, 143522
DOI: 10.1016/j.jclepro.2024.143522

High-Complexity WO3-Based Catalyst with Multi-Catalytic Species via 3D Printing

Xiaofeng Wang, Wei Guo, Raed Abu-Reziq and Shlomo Magdassi

Catalysts, 2020, 10, 840
DOI: 10.3390/catal10080840

Systematic evaluation of agarose- and agar-based bioinks for extrusion-based bioprinting of enzymatically active hydrogels

Lukas Wenger, Carsten P. Radtke, Eva Gerisch, Max Kollmann, Christof M. Niemeyer, Kersten S. Rabe and Jürgen Hubbuch

Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.928878

One-Pot Three-Dimensional Printing of a Hierarchical NiMo/Al2O3 Monolithic Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Jixing Liu, Jingyi Zhu, Jie Zhu, Jundong Xu, Hui Liu, Mingqing Hua, Huifang Cheng, Huaming Li, Jian Liu, Wenshuai Zhu and Hongbing Ji

ACS Appl. Mater. Interfaces, 2023, 15, 33593
DOI: 10.1021/acsami.3c05620

Computer simulation of submicron fluid flows in microfluidic chips and their applications in food analysis

Zhaoda Xie, Hongbin Pu and Da‐Wen Sun

Comp Rev Food Sci Food Safe, 2021, 20, 3818
DOI: 10.1111/1541-4337.12766

3D printing of hierarchically porous lightweight activated carbon/alumina monolithic adsorbent for adsorptive desulfurization of hydrogenated diesel

Jie Zhu, Jiangtao Yu, Peiwen Wu, Jixing Liu, Haiyan Ji, Yan Huang, Yanhong Chao, Haiyan Liu, Wenshuai Zhu and Zhichang Liu

Separation and Purification Technology, 2024, 330, 125334
DOI: 10.1016/j.seppur.2023.125334

Al2O3 nanofibers prepared from aluminum Di(sec-butoxide)acetoacetic ester chelate exhibits high surface area and acidity

M.A. Rodriguez-Olguin, H. Atia, M. Bosco, A. Aguirre, R. Eckelt, E.D. Asuquo, M. Vandichel, J.G.E. Gardeniers and A. Susarrey-Arce

Journal of Catalysis, 2022, 405, 520
DOI: 10.1016/j.jcat.2021.11.019

A nonequilibrium thermodynamics perspective on nature-inspired chemical engineering processes

Vincent Gerbaud, Nataliya Shcherbakova and Sergio Da Cunha

Chemical Engineering Research and Design, 2020, 154, 316
DOI: 10.1016/j.cherd.2019.10.037

Improved low-temperature CO oxidation using heterogeneous nanofibrous structures decorated with Pd atoms and nanocrystals

M.A. Rodriguez-Olguin, D. Cazac, F. Ruiz-Zepeda, S. Bartling, M. Bosco, H. Atia, R. Eckelt, A. Manzo-Robledo, M. Vandichel, A. Aguirre, J.G.E. Gardeniers and A. Susarrey-Arce

Materials Today Catalysis, 2025, 9, 100093
DOI: 10.1016/j.mtcata.2025.100093

3D honeycomb monoliths with interconnected channels for the sustainable production of dihydroxybenzenes: towards the intensification of selective oxidation processes

Gonzalo Vega, Asunción Quintanilla, Nieves Menendez, Manuel Belmonte and José A. Casas

Chemical Engineering and Processing - Process Intensification, 2021, 165, 108437
DOI: 10.1016/j.cep.2021.108437

Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Evgeniy G. Gordeev and Valentine P. Ananikov

Russ. Chem. Rev., 2020, 89, 1507
DOI: 10.1070/RCR4980

Accelerating Fuel Cell Development with Additive Manufacturing Technologies: State of the Art, Opportunities and Challenges

X. Y. Tai, A. Zhakeyev, H. Wang, K. Jiao, H. Zhang and J. Xuan

Fuel Cells, 2019, 19, 636
DOI: 10.1002/fuce.201900164

Low Tortuosity 3D‐Printed Structures Enhance Reaction Kinetics in Electrochemical Energy Storage and Electrocatalysis

Xinzhe Xue, Dun Lin and Yat Li

Small Structures, 2022, 3
DOI: 10.1002/sstr.202200159

Overflow Control for Sustainable Development by Superwetting Surface with Biomimetic Structure

Shan Zhou, Lei Jiang and Zhichao Dong

Chem. Rev., 2023, 123, 2276
DOI: 10.1021/acs.chemrev.1c00976

Influence of Channel Geometry in Honeycomb Catalyst Carriers Fabricated by Additive Manufacturing on Carbon Monoxide Oxidation Activity

M. M. Sychev, A. S. Dolgin, O. A. Cheremisina, A. Yu. Postnov and E. I. Sysoev

Glass Phys Chem, 2025, 51, 601
DOI: 10.1134/S1087659625600425

Reactor design via scan line patterning: An implicit approach to create scalable microstructured parts in selective laser melting

Alexander Limper, Anselm Brodersen, Francesca Zaio, Matteo Ambrosetti and John Linkhorst

Chemical Engineering Journal, 2024, 480, 148039
DOI: 10.1016/j.cej.2023.148039

Advance in Using Plasma Technology for Modification or Fabrication of Carbon‐Based Materials and Their Applications in Environmental, Material, and Energy Fields

Xin Sun, Jiacheng Bao, Kai Li, Morris D. Argyle, Gang Tan, Hertanto Adidharma, Kaihang Zhang, Maohong Fan and Ping Ning

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202006287

Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications

Shane Lawson, Xin Li, Harshul Thakkar, Ali A. Rownaghi and Fateme Rezaei

Chem. Rev., 2021, 121, 6246
DOI: 10.1021/acs.chemrev.1c00060

Enhanced CO2 methanation with ceramic 3D printed catalyst bed reactor

N. Kostretsova, A. Pesce, C. Hofmann, S. Neuberg, I. Babeli, M. Nuñez, A. Morata, G. Kolb, M. Torrell and A. Tarancón

Chemical Engineering Journal, 2025, 511, 161752
DOI: 10.1016/j.cej.2025.161752

Recent advances in 3D printing for catalytic applications

Jie Zhu, Peiwen Wu, Yanhong Chao, Jiangtao Yu, Wenshuai Zhu, Zhichang Liu and Chunming Xu

Chemical Engineering Journal, 2022, 433, 134341
DOI: 10.1016/j.cej.2021.134341

Direct photo-curing 3D printing of nickel-based electrocatalysts for highly-efficient hydrogen evolution

Zhaojing Han, Gang Wang, Jie Zhang and Zhiyong Tang

Nano Energy, 2022, 102, 107615
DOI: 10.1016/j.nanoen.2022.107615

Enhanced performance of 3D printed graphene electrodes after electrochemical pre-treatment: Role of exposed graphene sheets

Pãmyla L. dos Santos, Vera Katic, Hugo C. Loureiro, Matheus F. dos Santos, Diego P. dos Santos, André L.B. Formiga and Juliano A. Bonacin

Sensors and Actuators B: Chemical, 2019, 281, 837
DOI: 10.1016/j.snb.2018.11.013

Numerical simulation of selective catalytic reduction of NO and SO2 oxidation in monolith catalyst

Chenghang Zheng, Lifeng Xiao, Ruiyang Qu, Shaojun Liu, Qi Xin, Peidong Ji, Hao Song, Weihong Wu and Xiang Gao

Chemical Engineering Journal, 2019, 361, 874
DOI: 10.1016/j.cej.2018.12.150

Immobilization strategies for heterogeneous catalysts in micro flow chemistry: Key techniques for efficient and sustainable chemical transformations

Xiao Chen, Mengmeng Fu, Jialun He, Jiayi Lu, Chensheng Wang, Danfeng Jiang, Yingguo Li and Chao Yu

Coordination Chemistry Reviews, 2025, 538, 216723
DOI: 10.1016/j.ccr.2025.216723

Glass‐Channel Molding Assisted 3D Printing of Metallic Microstructures Enabled by Femtosecond Laser Internal Processing and Microfluidic Electroless Plating

Jian Xu, Xiaolong Li, Yi Zhong, Jia Qi, Zhenhua Wang, Zhifang Chai, Wenwu Li, Chengbin Jing and Ya Cheng

Adv Materials Technologies, 2018, 3
DOI: 10.1002/admt.201800372

3D-printed Ni/γ-Al2O3 catalysts for CO2 methanation: Effect of Ni loading and sintering temperature

Seyed Ali Razavi, Gemma Fargas, Isabel Serrano, Miguel Ángel Laguna-Bercero, Tània Vilella, Luis Llanes, Daniel Rodríguez, Maria-Pau Ginebra, Jordi Llorca and Miguel Morales

Chemical Engineering Journal, 2025, 523, 168665
DOI: 10.1016/j.cej.2025.168665

Impact of Co impregnation on 3D printed alumina supports for Fischer-Tropsch synthesis

Jasper Lefevere, Ben Sutens, Evert Boymans and Bart Michielsen

Catalysis Today, 2024, 437, 114585
DOI: 10.1016/j.cattod.2024.114585

Continuous synthesis of isobutylaluminoxanes in a compact and integrated approach

Yirong Feng, Mengbo Zhang, Haomiao Zhang, Jingdai Wang and Yongrong Yang

Chemical Engineering Journal, 2021, 425, 131750
DOI: 10.1016/j.cej.2021.131750

Design and Validation of an Additively Manufactured Flow Cell–Static Mixer Combination for Inline NMR Spectroscopy

Martin Bornemann, Simon Kern, Nico Jurtz, Tobias Thiede, Matthias Kraume and Michael Maiwald

Ind. Eng. Chem. Res., 2019, 58, 19562
DOI: 10.1021/acs.iecr.9b03746

Additive Manufacturing in the Development of Scalable Models of Technological Equipment

Ildar Sabanaev, Alexey Dinmuhametov, S. Bratan and S. Roshchupkin

MATEC Web Conf., 2021, 346, 01040
DOI: 10.1051/matecconf/202134601040

Controllable Liquid-Liquid Printing with Defect-free, Corrosion-Resistance, Unrestricted Wetting Condition

Lingli Min, Haohui Zhang, Hong Pan, Feng Wu, Yuhang Hu, Zhizhi Sheng, Miao Wang, Mengchuang Zhang, Shuli Wang, Xinyu Chen and Xu Hou

iScience, 2019, 19, 93
DOI: 10.1016/j.isci.2019.07.017

Design of 3D-printed structures for improved mass transfer and pressure drop in packed-bed reactors

Lucas Chatre, Joseph Socci, Samuel J. Adams, Petr Denissenko and Nikolay Cherkasov

Chemical Engineering Journal, 2021, 420, 129762
DOI: 10.1016/j.cej.2021.129762

Engineering 3D Printed Structures Towards Electrochemically Driven Green Ammonia Synthesis: A Perspective

Akshay Kumar K. Padinjareveetil, Juan V. Perales‐Rondon and Martin Pumera

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202202080

3D printed catalytic converters with enhanced activity for low-temperature methane oxidation in dual-fuel engines

Saeed Hajimirzaee and Aidan M. Doyle

Fuel, 2020, 274, 117848
DOI: 10.1016/j.fuel.2020.117848

3D Printing of Integrated Metallic Reactor Catalysts: Concept and Application

Frances Pope, Millie Fowler, Daan Giesen, Larissa Drangai and Gadi Rothenberg

Chem Eng & Technol, 2024, 47, 932
DOI: 10.1002/ceat.202400087

Recent advances in 3D printing of tailored catalysts for heterogeneous thermocatalytic reactions

Qiqi Du, Shuhan Bao, Kangzhou Wang, Zhaohan Sheng, Caihu Li, Bintao Wu, Kuanguan Liu, Xinhua Gao, Jie Mao, Tian-Sheng Zhao and Jianli Zhang

Fuel, 2026, 405, 136554
DOI: 10.1016/j.fuel.2025.136554

Three-Dimensional Printing of Acrylonitrile Butadiene Styrene Microreactors for Photocatalytic Applications

Aarón Cabrera, Ismael Pellejero, Tamara Oroz-Mateo, Cristina Salazar, Alberto Navajas, Claudio Fernández-Acevedo and Luis M. Gandía

Ind. Eng. Chem. Res., 2020, 59, 20686
DOI: 10.1021/acs.iecr.0c04349

Highly stable 3D-printed monolithic Al2O3-supported Ni-based structured catalysts for dry reforming of methane

Jinjin Zhang, Guangcai Zhang, Jian Song, Fangyong Yu, Ngie Hing Wong, Jaka Sunarso, Naitao Yang, Bo Meng, Xiaoyao Tan and Shaomin Liu

Additive Manufacturing, 2024, 80, 103983
DOI: 10.1016/j.addma.2024.103983

Modelling steady-state convective heat transfer in different periodic open cellular structures (POCS) – A superposition approach

Konrad Dubil, Thomas Wetzel and Benjamin Dietrich

International Journal of Heat and Mass Transfer, 2023, 200, 123546
DOI: 10.1016/j.ijheatmasstransfer.2022.123546

Innovative catalyst integration on transparent silicone microreactors for photocatalytic applications

Ismael Pellejero, Alberto Clemente, Santiago Reinoso, Alfonso Cornejo, Alberto Navajas, José J. Vesperinas, Miguel A. Urbiztondo and Luis M. Gandía

Catalysis Today, 2022, 383, 164
DOI: 10.1016/j.cattod.2020.05.058

Customizing continuous chemistry and catalytic conversion for carbon–carbon cross-coupling with 3dP

Robert E. McMillin, Brian Clark, Kaitlin Kay, B. Frank Gupton and James K. Ferri

International Journal of Chemical Reactor Engineering, 2023, 21, 313
DOI: 10.1515/ijcre-2022-0117

3D‐Printed Geopolymer as a Basic Heterogeneous Catalyst for the Synthesis of α‐Cyanoacrylates Through the Knoevenagel Condensation

Francesca T. Albino, Pedro A. M. Moro, Wanessa B. Menegaro, Luciano Senff, Marcus M. Sá and Dachamir Hotza

Eur J Org Chem, 2026
DOI: 10.1002/ejoc.202501167

Design of 3D printed Mg doped Ni-Co-containing biowaste-derived porous silica as highly-effective catalysts for CO2 methanation

Grigoria Theochari, Ivalina Trendafilova, Boian Mladenov, Daniela Kovacheva, Daniela Karashanova, Genoveva Atanasova, Violeta Mitova and Margarita Popova

Catalysis Today, 2025, 459, 115405
DOI: 10.1016/j.cattod.2025.115405

Metal 3D printing technology for functional integration of catalytic system

Qinhong Wei, Hangjie Li, Guoguo Liu, Yingluo He, Yang Wang, Yen Ee Tan, Ding Wang, Xiaobo Peng, Guohui Yang and Noritatsu Tsubaki

Nat Commun, 2020, 11
DOI: 10.1038/s41467-020-17941-8

3D-printed devices for continuous-flow lithium recovery of brines

Jiangtao Yu, Jie Zhu, Zhuo Han, Peng Cui, Haiying Mi, Anan Zhang, Linlin Chen, Xiaowei Li, Peiwen Wu, Yanhong Chao, Wenshuai Zhu and Zhichang Liu

Desalination, 2024, 586, 117748
DOI: 10.1016/j.desal.2024.117748

Sosyal Bilgiler Öğretmeni Perspektifinden 3B Yazıcıların Eğitimde Kullanımı

Kibar AKTIN, Tuğra KARADEMİR COŞKUN and Hülya KARAÇALI TAZE

Karadeniz Sosyal Bilimler Dergisi, 2023, 15, 465
DOI: 10.38155/ksbd.1171741

Direct photo-curing 3D printed bionic multistage Mo-doped tungsten oxide catalysts for static and dynamic oxidative desulfurization of fuels

Yingcheng Wu, Jing He, Kang Zhong, Sibo Wang, Xianglin Zhu, Xiaojie She, Wei Jiang, Huaming Li and Hui Xu

Separation and Purification Technology, 2025, 354, 128399
DOI: 10.1016/j.seppur.2024.128399

RETRACTED ARTICLE: Homogeneous Catalytic Dissolution of Recalcitrant Chalcopyrite (CuFeS2)

Leila Zand, Ali Behrad Vakylabad and Mir Esmaeil Masoumi

Top Catal, 2024, 67, 1406
DOI: 10.1007/s11244-022-01565-x

Issues of development of research equipment elements by FDM printing

Rustem Shakirov, Ildar Sabanaev, I. Tanaino and T. Dzholdosheva

E3S Web of Conf., 2023, 402, 03054
DOI: 10.1051/e3sconf/202340203054

From Batch to Continuous Small-Scale Production of Particles: Mixer Design Methodology for Robust Operation

Stefan Höving, Philipp Ronnewinkel and Norbert Kockmann

Crystals, 2024, 14, 398
DOI: 10.3390/cryst14050398

Boosting CO2 hydrogenation of Fe-based monolithic catalysts via 3D printing technology-induced heat/mass-transfer enhancements

Yang Wang, Shiyuan Lin, Meng Li, Chuanyong Zhu, Hao Yang, Pei Dong, Mingjie Lu, Wenhang Wang, Jianlin Cao, Qiang Liu, Xiang Feng, Han Hu, Noritatsu Tsubaki and Mingbo Wu

Applied Catalysis B: Environmental, 2024, 340, 123211
DOI: 10.1016/j.apcatb.2023.123211

3D‐Printed Structured Reactor with Integrated Single‐Atom Catalyst Film for Hydrogenation

Gianvito Vilé, Derrick Ng, Zongli Xie, Ivan Martinez‐Botella, John Tsanaktsidis and Christian H. Hornung

ChemCatChem, 2022, 14
DOI: 10.1002/cctc.202101941

TiO2 3D structures for environmental purposes by additive manufacturing: Photoactivity test and reuse

Fabiola Mendez-Arriaga, Elsa de la Calleja, Leopoldo Ruiz-Huerta, Alberto Caballero-Ruiz and Rafael Almanza

Materials Science in Semiconductor Processing, 2019, 100, 35
DOI: 10.1016/j.mssp.2019.04.034

Direct ink writing of metal‐based electrocatalysts for Li–S batteries with efficient polysulfide conversion

Ting Meng, Zeyu Geng, Fei Ma, Xiaohan Wang, Haifeng Zhang and Cao Guan

Interdisciplinary Materials, 2023, 2, 589
DOI: 10.1002/idm2.12110

Electrical Capacitance Volume Tomography (ECVT) for Characterization of Additively Manufactured Lattice Structures (AMLS) in Gas-Liquid Systems

Claas Spille, Vaishakh Prasannan Tholan, Benjamin Straiton, Monika Johannsen, Marko Hoffmann, Qussai Marashdeh and Michael Schlüter

Fluids, 2021, 6, 321
DOI: 10.3390/fluids6090321

Engineering Catalysts at the Multiscale: Past, Present, and Future of Catalyst Manufacturing and Shaping Processes

Ali M. Alkadhem, Eduardo Perez‐Botella, Swantje Pietsch‐Braune, Hend Omar Mohamed, Carlos A. Grande, Stefan Heinrich and Pedro Castaño

ChemCatChem, 2026, 18
DOI: 10.1002/cctc.202501109

High photocatalytic efficiency of inkjet printed patterns by formulation of eco-friendly TiO2-based inks

J. Yus, Z. Gonzalez, A.J. Sanchez-Herencia, A. Sangiorgi, A. Sanson, C. Galassi and B. Ferrari

Open Ceramics, 2021, 8, 100197
DOI: 10.1016/j.oceram.2021.100197

3D-printing of metallic honeycomb monoliths as a doorway to a new generation of catalytic devices: the Ni-based catalysts in methane dry reforming showcase

Fazia Agueniou, Hilario Vidal, Juan de Dios López, Juan C. Hernández-Garrido, Miguel A. Cauqui, Francisco J. Botana, José J. Calvino, Vladimir V. Galvita and José M. Gatica

Catalysis Communications, 2021, 148, 106181
DOI: 10.1016/j.catcom.2020.106181

Ammonia decomposition over 3D-printed CeO2 structures loaded with Ni

Ilaria Lucentini, Isabel Serrano, Lluís Soler, Núria J. Divins and Jordi Llorca

Applied Catalysis A: General, 2020, 591, 117382
DOI: 10.1016/j.apcata.2019.117382

Additive Technologies for Medicine, Pharmacy, and Chemical Industry: Applications and Outlook

A. A. Abramov and N. V. Men’shutina

Teoretičeskie osnovy himičeskoj tehnologii, 2023, 57, 532
DOI: 10.31857/S0040357123050019

Batch Reactor Design and Conception at Laboratory Scale for Solid-State Anaerobic Digestion: Practical Comparison Between 3D-Printed Digesters and Conventional Methods

Arnaud Dujany, Franco Otaola, Laura André, Amar Naji, Denis Luart, Mikel Leturia, André Pauss and Thierry Ribeiro

Fermentation, 2025, 11, 41
DOI: 10.3390/fermentation11010041

Point Discharge Microplasma Optical Emission Spectrometer: Hollow Electrode for Efficient Volatile Hydride/Mercury Sample Introduction and 3D-Printing for Compact Instrumentation

Mengtian Li, Kai Li, Lin He, Xiaoliang Zeng, Xi Wu, Xiandeng Hou and Xiaoming Jiang

Anal. Chem., 2019, 91, 7001
DOI: 10.1021/acs.analchem.9b00045

Steam methane reforming over a catalyst-coated wire with Joule heating: Heat and mass transfer study in catalyst-wire system

Dmitry Pashchenko and Viacheslav Papkov

International Journal of Hydrogen Energy, 2025, 170, 151164
DOI: 10.1016/j.ijhydene.2025.151164

Synergistic intensification of palladium-based membrane reactors for hydrogen production: A review

Wei-Wei Yang, Xin-Yuan Tang, Xu Ma, Xiangkun Elvis Cao and Ya-Ling He

Energy Conversion and Management, 2025, 325, 119424
DOI: 10.1016/j.enconman.2024.119424

Experimental evaluation of a heat pipe cooled structured reactor as part of a two-stage catalytic methanation process in power-to-gas applications

Michael Neubert, Alexander Hauser, Babak Pourhossein, Marius Dillig and Juergen Karl

Applied Energy, 2018, 229, 289
DOI: 10.1016/j.apenergy.2018.08.002

Current scenario and prospects in manufacture strategies for glass, quartz, polymers and metallic microreactors: A comprehensive review

M. Isabel Domínguez, Miguel A. Centeno, Marcela Martínez T., Luis F. Bobadilla, Óscar H. Laguna and José A. Odriozola

Chemical Engineering Research and Design, 2021, 171, 13
DOI: 10.1016/j.cherd.2021.05.001

Opportunities and limitations of metal additive manufacturing of structured catalytic converters

Fatemeh Mehdipour, Tim Delrieux, Florian Maurer, Jan-Dierk Grunwaldt, Christoph Klahn and Roland Dittmeyer

Catalysis Communications, 2024, 187, 106873
DOI: 10.1016/j.catcom.2024.106873

3D‐Printed Phenacrylate Decarboxylase Flow Reactors for the Chemoenzymatic Synthesis of 4‐Hydroxystilbene

Martin Peng, Esther Mittmann, Lukas Wenger, Jürgen Hubbuch, Martin K. M. Engqvist, Christof M. Niemeyer and Kersten S. Rabe

Chemistry A European J, 2019, 25, 15998
DOI: 10.1002/chem.201904206

3D printing in analytical chemistry: current state and future

Pavel N. Nesterenko

Pure and Applied Chemistry, 2020, 92, 1341
DOI: 10.1515/pac-2020-0206

Photoreaction Drives Efficient, Precise, and Sustainable Additive Manufacturing

Jinghan Hu, Dan Wang and Haiyan Peng

Chem Bio Eng., 2024, 1, 414
DOI: 10.1021/cbe.3c00126

Advanced preparation method of monolithic catalyst carriers using 3D-printing technology

Filip Car, Gabriela Brnadić, Vesna Tomašić and Domagoj Vrsaljko

Prog Addit Manuf, 2022, 7, 797
DOI: 10.1007/s40964-022-00266-x

Improving treatment of VOCs by integration of absorption columns into electrochemical cells using 3-D printing technology

Rafael Granados-Fernández, Miguel A. Montiel, Andrea N. Arias, Carmen M. Fernández-Marchante, Justo Lobato and Manuel A. Rodrigo

Electrochimica Acta, 2023, 451, 142298
DOI: 10.1016/j.electacta.2023.142298

3D Printing in Heterogeneous Catalysis—The State of the Art

Elżbieta Bogdan and Piotr Michorczyk

Materials, 2020, 13, 4534
DOI: 10.3390/ma13204534

Advanced Formulations Based on Poly(ionic liquid) Materials for Additive Manufacturing

Sara Miralles-Comins, Marcileia Zanatta and Victor Sans

Polymers, 2022, 14, 5121
DOI: 10.3390/polym14235121

Digital Light Processing 3D Printing of Enhanced Polymers via Interlayer Welding

Guangda Zhu, Yi Hou, Jian Xu and Ning Zhao

Macromol. Rapid Commun., 2022, 43
DOI: 10.1002/marc.202200053

From whey robocasting to custom 3D porous carbons

Raúl Llamas-Unzueta, J. Angel Menéndez, Marta Suárez, Adolfo Fernández and Miguel A. Montes-Morán

Additive Manufacturing, 2022, 59, 103083
DOI: 10.1016/j.addma.2022.103083

Structured catalysts and reactors – Perspectives for demanding applications

Freek Kapteijn and Jacob A. Moulijn

Catalysis Today, 2022, 383, 5
DOI: 10.1016/j.cattod.2020.09.026

Engineering 3D-printed molybdenum carbide catalysts for selective CO2 reduction to CO

Arturo Pajares, Murat Tanriverdi, Eduardo Coutino-Gonzalez, Jacob Andrade-Arvizu, Maxim Guc, Pablo Guardia, Hector Prats and Bart Michielsen

Chemical Engineering Journal, 2025, 520, 166134
DOI: 10.1016/j.cej.2025.166134

Research and prospect on microstructure and properties of laser additive manufactured parts

Wanyang Li, Weiwei Liu, Huanqiang Liu, Zongyu Ma, Tandong Wang, Guangda Hu, Zhenxin Lyu, Hanbing Zhang, Jianrong Song, Bingjun Liu, Yanming Liu, Zhengkai Wang, Yukun Xia, Weiqiang Gong, Yujin Huang, Zhonghui An, Lin Xue, Fengtao Wang, Yingzhong Zhang and Shuai Hou

Int J Adv Manuf Technol, 2024, 130, 2023
DOI: 10.1007/s00170-023-12781-4

Scalable droplet generator design using parallel-arranged capillaries with axial misalignment

Linjin Lou, Zhuoqin Fan, Yanjiao Xu, Haomiao Zhang, Jingdai Wang and Yongrong Yang

Chemical Engineering Science, 2024, 300, 120577
DOI: 10.1016/j.ces.2024.120577

3D printed resin-coated device for uranium (VI) extraction

Melisa Rodas Ceballos, Francisco González Serra, José Manuel Estela, Víctor Cerdà and Laura Ferrer

Talanta, 2019, 196, 510
DOI: 10.1016/j.talanta.2018.12.055

Catalytic performance of a metal-free graphene oxide-Al2O3 composite assembled by 3D printing

Jhonny Azuaje, Adrián Rama, Ana Mallo-Abreu, Mónica G. Boado, María Majellaro, Carmen R. Tubío, Rubén Prieto, Xerardo García-Mera, Francisco Guitián, Eddy Sotelo and Alvaro Gil

Journal of the European Ceramic Society, 2021, 41, 1399
DOI: 10.1016/j.jeurceramsoc.2020.10.010

Syngas to higher alcohols synthesis over 3D printed KMoCo/ZSM5 monolith

Waqas Aslam, Mohamed H. Ahmed, Tengfei Qui and Muxina Konarova

Chemical Engineering Journal Advances, 2020, 3, 100024
DOI: 10.1016/j.ceja.2020.100024

Precipitation of hydroxyapatite nanoparticles in 3D-printed reactors

Joanna Latocha, Michał Wojasiński, Klaudia Jurczak, Stanisław Gierlotka, Paweł Sobieszuk and Tomasz Ciach

Chemical Engineering and Processing - Process Intensification, 2018, 133, 221
DOI: 10.1016/j.cep.2018.10.001

Additive Technologies for Medicine, Pharmacy, and Chemical Industry: Applications and Outlook

A. A. Abramov and N. V. Men’shutina

Theor Found Chem Eng, 2023, 57, 816
DOI: 10.1134/S0040579523050342

Production and characterization of copper periodic open cellular structures made by 3D printing‐replica technique

Riccardo Balzarotti, Alessandra Bisaccia, Maria Celeste Tripi, Matteo Ambrosetti, Gianpiero Groppi and Enrico Tronconi

J Adv Manuf & Process, 2020, 2
DOI: 10.1002/amp2.10068

A novel method to prepare copper microspheres via chemical reduction route

O.A. Logutenko, A.I. Titkov, A.M. Vorobyov and N.Z. Lyakhov

Journal of Materials Research and Technology, 2021, 13, 1254
DOI: 10.1016/j.jmrt.2021.05.046

Towards Solar Methanol: Past, Present, and Future

Athanasios A. Tountas, Xinyue Peng, Alexandra V. Tavasoli, Paul N. Duchesne, Thomas L. Dingle, Yuchan Dong, Lourdes Hurtado, Abhinav Mohan, Wei Sun, Ulrich Ulmer, Lu Wang, Thomas E. Wood, Christos T. Maravelias, Mohini M. Sain and Geoffrey A. Ozin

Advanced Science, 2019, 6
DOI: 10.1002/advs.201801903

Advanced absorber heat integration via heat exchange packings

Thomas Moore, Du Nguyen, Jaisree Iyer, Pratanu Roy and Joshuah K. Stolaroff

AIChE Journal, 2021, 67
DOI: 10.1002/aic.17243

Monolith Catalyst Design by Combining 3D Printing and Atomic Layer Deposition: Toward Green Palladium‐Catalyzed Cross‐Coupling Reactions

Hippolyte Dory, Eddy Petit, Syreina El‐Sayegh, Lucie Badouric, Victoria Castro, Mikhael Bechelany, Damien Voiry, Philippe Miele, Luc Lajaunie and Chrystelle Salameh

Adv Eng Mater, 2025, 27
DOI: 10.1002/adem.202401546

Novel Wire Mesh Packing with Controllable Cross-Sectional Area in a Rotating Packed Bed: Mass Transfer Studies

Zhang-Nan Wen, Wei Wu, Yong Luo, Liang-Liang Zhang, Bao-Chang Sun and Guang-Wen Chu

Ind. Eng. Chem. Res., 2020, 59, 16043
DOI: 10.1021/acs.iecr.0c01886

Advances in Designing 3D‐Printed Systems for CO2 Reduction

Akshay Kumar K. Padinjareveetil and Martin Pumera

Adv Materials Inter, 2023, 10
DOI: 10.1002/admi.202201734

Tuning the Mechanical Properties of 3D‐printed Objects by the RAFT Process: From Chain‐Growth to Step‐Growth

Xiaofeng Pan, Jiajia Li, Zhuang Li, Qing Li, Xiangqiang Pan, Zhengbiao Zhang and Jian Zhu

Angew Chem Int Ed, 2024, 63
DOI: 10.1002/anie.202318564

Adsorbent shaping as enabler for intensified pressure swing adsorption (PSA): A critical review

Dora-Andreea Chisăliță, Jurriaan Boon and Leonie Lücking

Separation and Purification Technology, 2025, 353, 128466
DOI: 10.1016/j.seppur.2024.128466

Изготовление блочных катализаторов окисления монооксида углерода с использованием аддитивных технологий

О. А. Черемисина, М. М. Сычёв, А. С. Долгин, Т. А. Вишневская, Н. В. Мальцева and А. С. Волобуева

Fizika i himiâ stekla, 2024, 50, 87
DOI: 10.31857/S0132665124010109

Assessment of a bench-scale additively manufactured evaporation-cooled structured packed bed reactor for FT synthesis

Christian Frilund, Erkki Laurila, Juho Peltola, Antti Pasanen, Atte Antikainen and Niko Heikkinen

Chemical Engineering and Processing - Process Intensification, 2025, 218, 110550
DOI: 10.1016/j.cep.2025.110550

Monolithic Stirrer Reactors for the Sustainable Production of Dihydroxybenzenes over 3D Printed Fe/γ-Al2O3 Monoliths: Kinetic Modeling and CFD Simulation

Pablo López, Asunción Quintanilla, Alma D. Salazar-Aguilar, Sofía M. Vega-Díaz, Irene Díaz-Herrezuelo, Manuel Belmonte and Jose A. Casas

Catalysts, 2022, 12, 112
DOI: 10.3390/catal12020112

Hyperporous carbon-coated 3D printed devices

Deyber A.V. Medina, Andreu Figuerola, Felipe Rodriguez, Álvaro J. Santos-Neto, Carlos P. Cabello, Gemma T. Palomino, Víctor Cerdà and Fernando Maya

Applied Materials Today, 2019, 14, 29
DOI: 10.1016/j.apmt.2018.11.001

Improving the radial heat transport and heat distribution in catalytic gas-solid reactors

Gregor D. Wehinger

Chemical Engineering and Processing - Process Intensification, 2022, 177, 108996
DOI: 10.1016/j.cep.2022.108996

High‐Performance Materials for 3D Printing in Chemical Synthesis Applications

Frederik Kotz, Patrick Risch, Dorothea Helmer and Bastian E. Rapp

Advanced Materials, 2019, 31
DOI: 10.1002/adma.201805982

Enhancement of devolatilization performance in a rotating packed bed with different packing structures

Yan-Bin Li, Wei Liu, Xia Zhang, Bao-Chang Sun, Yong Luo and Guang-Wen Chu

Separation and Purification Technology, 2021, 278, 119527
DOI: 10.1016/j.seppur.2021.119527

Structured nanoporous copper catalysts prepared by laser powder bed fusion and dealloying for on-board methanol steam reforming

Chuandong Li, Shuaishuai Yuan, Xinqi Yao, Xinhai Yu, Bo Li and Shan-Tung Tu

Fuel, 2023, 347, 128367
DOI: 10.1016/j.fuel.2023.128367

Methodik zur Entwicklung additiv gefertigter Packungsstrukturen im Bereich der thermischen Trenntechnik

Johannes Neukäufer, Florian Hanusch, Martin Kutscherauer, Sebastian Rehfeldt, Harald Klein and Thomas Grützner

Chemie Ingenieur Technik, 2019, 91, 1014
DOI: 10.1002/cite.201800171

Smart reactors – Combining stimuli-responsive hydrogels and 3D printing

X. Hu, J. Karnetzke, M. Fassbender, S. Drücker, S. Bettermann, B. Schroeter, W. Pauer, H.-U. Moritz, B. Fiedler, G. Luinstra and I. Smirnova

Chemical Engineering Journal, 2020, 387, 123413
DOI: 10.1016/j.cej.2019.123413

Polysaccharide-based nanoparticles for 3D (bio)printing

Zahra Khorsandi, Mehdi Maham, Valiollah Mirkhani, Benjamin Kruppke and Hossein Ali Khonakdar

Advances in Colloid and Interface Science, 2025, 344, 103595
DOI: 10.1016/j.cis.2025.103595

3D Printed Graphene Electrodes Modified with Prussian Blue: Emerging Electrochemical Sensing Platform for Peroxide Detection

Vera Katic, Pãmyla L. dos Santos, Matheus F. dos Santos, Bruno M. Pires, Hugo C. Loureiro, Ana P. Lima, Júlia C. M. Queiroz, Richard Landers, Rodrigo A. A. Muñoz and Juliano A. Bonacin

ACS Appl. Mater. Interfaces, 2019, 11, 35068
DOI: 10.1021/acsami.9b09305

A Perspective on Continuous Flow Chemistry in the Pharmaceutical Industry

Marcus Baumann, Thomas S. Moody, Megan Smyth and Scott Wharry

Org. Process Res. Dev., 2020, 24, 1802
DOI: 10.1021/acs.oprd.9b00524

Hydrodynamics of a novel 3D printed structured packing–SpiroPak

Biao Sun, Tejas Bhatelia, Ranjeet P. Utikar, Geoffrey M. Evans and Vishnu K. Pareek

Chemical Engineering and Processing - Process Intensification, 2021, 167, 108533
DOI: 10.1016/j.cep.2021.108533

Simulation‐Driven Design of an Additively Manufactured Reactor for Exothermic Liquid‐Liquid Reactions

Alexander Jastram, Senada Schaack and Christoph Kiener

Chemie Ingenieur Technik, 2022, 94, 948
DOI: 10.1002/cite.202200049

A perspective on power-to-heat in catalytic processes for decarbonization

Matteo Ambrosetti

Chemical Engineering and Processing - Process Intensification, 2022, 182, 109187
DOI: 10.1016/j.cep.2022.109187

Kinetic study of phenol hydroxylation by H2O2 in 3D Fe/SiC honeycomb monolithic reactors: Enabling the sustainable production of dihydroxybenzenes

Gonzalo Vega, Asunción Quintanilla, Manuel Belmonte and José A. Casas

Chemical Engineering Journal, 2022, 428, 131128
DOI: 10.1016/j.cej.2021.131128

Design, Heat Transfer, and Visualization of the Milli-Reactor by CFD and ANN

Hanyang Liu, Chenfeng Wang, Rijie Wang and Xiaoxia Yang

Processes, 2022, 10, 2329
DOI: 10.3390/pr10112329

Tailoring electrochemically assisted absorbers for the efficient removal of volatile organic compounds

Rafael Granados-Fernández, Miguel A. Montiel, Carmen M. Fernández-Marchante, Justo Lobato and Manuel A. Rodrigo

Journal of Environmental Chemical Engineering, 2024, 12, 111620
DOI: 10.1016/j.jece.2023.111620

From bench scale to pilot plant: A 150x scaled-up configuration of a microwave-driven structured reactor for methane dehydroaromatization

I. Julian, C.M. Pedersen, A.B. Jensen, A.K. Baden, J.L. Hueso, A.V. Friderichsen, H. Birkedal, R. Mallada and J. Santamaria

Catalysis Today, 2022, 383, 21
DOI: 10.1016/j.cattod.2021.04.013

Development of Power-to-X Catalytic Processes for CO2 Valorisation: From the Molecular Level to the Reactor Architecture

Luis F. Bobadilla, Lola Azancot, Ligia A. Luque-Álvarez, Guillermo Torres-Sempere, Miriam González-Castaño, Laura Pastor-Pérez, Jie Yu, Tomás Ramírez-Reina, Svetlana Ivanova, Miguel A. Centeno and José A. Odriozola

Chemistry, 2022, 4, 1250
DOI: 10.3390/chemistry4040083

Towards Versatile Continuous‐Flow Chemistry and Process Technology Via New Conceptual Microreactor Systems

Bandaru T. Ramanjaneyulu, Niraj K. Vishwakarma, Shinde Vidyacharan, Praveen Reddy Adiyala and Dong‐Pyo Kim

Bulletin Korean Chem Soc, 2018, 39, 757
DOI: 10.1002/bkcs.11467

Can 3D-printed catalysts improve hydrogen peroxide thruster performance? An experimental and numerical study

Simon Reid, Frédéric Lecarpentier, Digby Symons and Matthew Watson

Chemical Engineering Science, 2025, 302, 120783
DOI: 10.1016/j.ces.2024.120783

Development of 3D+G printing for the design of customizable flow reactors

Fedor A. Kucherov, Leonid V. Romashov and Valentine P. Ananikov

Chemical Engineering Journal, 2022, 430, 132670
DOI: 10.1016/j.cej.2021.132670

Structured Reactors Based on 3D Fe/SiC Catalysts: Understanding the Effects of Mixing

Gonzalo Vega, Asuncion Quintanilla, Pablo López, Manuel Belmonte and Jose A. Casas

Ind. Eng. Chem. Res., 2022, 61, 11678
DOI: 10.1021/acs.iecr.2c01611

Enhanced Fluid Dynamics in 3D Monolithic Reactors to Improve the Chemical Performance: Experimental and Numerical Investigation

Asuncion Quintanilla, Gonzalo Vega, Pablo López, Francesca García, Enrique Madurga, Manuel Belmonte and Jose A. Casas

Ind. Eng. Chem. Res., 2021, 60, 14701
DOI: 10.1021/acs.iecr.1c03098

High‐Resolution Additive Manufacturing of a Biodegradable Elastomer with A Low‐Cost LCD 3D Printer

Vahid Karamzadeh, Molly L. Shen, Hossein Ravanbakhsh, Ahmad Sohrabi‐Kashani, Sargol Okhovatian, Houman Savoji, Milica Radisic and David Juncker

Adv Healthcare Materials, 2024, 13
DOI: 10.1002/adhm.202303708

Exploring Greener Pathways and Catalytic Systems for Ethylene Carbonate Production

Wei Lin Ng, Adrian Chun Minh Loy, David McManus, Ashwani K. Gupta, Ajit K. Sarmah and Sankar Bhattacharya

ACS Sustainable Chem. Eng., 2023, 11, 14287
DOI: 10.1021/acssuschemeng.3c03947

Recent developments in microfluidic device-based preparation, functionalization, and manipulation of nano- and micro-materials

Guangsheng Luo, Le Du, Yujun Wang and Kai Wang

Particuology, 2019, 45, 1
DOI: 10.1016/j.partic.2018.10.001

Chemical etching optimization of 3D printed α-Al2O3 monoliths to enhance the catalytic applications

C. Radogna, I. Serrano, G. Fargas, J. Llorca and J.J. Roa

Journal of the European Ceramic Society, 2024, 44, 7189
DOI: 10.1016/j.jeurceramsoc.2024.05.006

CO2 hydrogenation to high-value products via heterogeneous catalysis

Run-Ping Ye, Jie Ding, Weibo Gong, Morris D. Argyle, Qin Zhong, Yujun Wang, Christopher K. Russell, Zhenghe Xu, Armistead G. Russell, Qiaohong Li, Maohong Fan and Yuan-Gen Yao

Nat Commun, 2019, 10
DOI: 10.1038/s41467-019-13638-9

3D-Printable and Enzymatically Active Composite Materials Based on Hydrogel-Filled High Internal Phase Emulsions

Lukas Wenger, Carsten P. Radtke, Jacqueline Göpper, Michael Wörner and Jürgen Hubbuch

Front. Bioeng. Biotechnol., 2020, 8
DOI: 10.3389/fbioe.2020.00713

Three-dimensional Kelvin cell geometry for improved heat transfer in fixed bed reactors: a study on geometric influences

Dong Ho Nguyen, Abdullah Saleem, Chi Cheng Chong, Rong Xu and Raymond Lau

Applied Thermal Engineering, 2026, 283, 128894
DOI: 10.1016/j.applthermaleng.2025.128894

Additive manufacturing of sodalite monolith for continuous heavy metal removal from water sources

Hengyu Shen, Run Zou, Yangtao Zhou, Xing Guo, Yanan Guan, Duo Na, Jinsong Zhang, Xiaolei Fan and Yilai Jiao

Chinese Journal of Chemical Engineering, 2022, 42, 82
DOI: 10.1016/j.cjche.2021.12.016

Fabrication of a Malaria-Ab ELISA Bioassay Platform with Utilization of Syringe-Based and 3D Printed Assay Automation

Christopher Lim, Yangchung Lee and Lawrence Kulinsky

Micromachines, 2018, 9, 502
DOI: 10.3390/mi9100502

Fostering integration of current industry application practices in the final year integrated design project

Chun Ming Chew, Hui Chieh Teoh, Law Yong Ng and Shee-Keat Mah

J. Comput. Educ., 2024, 11, 1133
DOI: 10.1007/s40692-023-00294-8

Enhancing the Thermal Performance of Slender Packed Beds through Internal Heat Fins

Nico Jurtz, Steffen Flaischlen, Sören C. Scherf, Matthias Kraume and Gregor D. Wehinger

Processes, 2020, 8, 1528
DOI: 10.3390/pr8121528

Structured, Shaped, or Printed Single‐Atom Catalysts and Their Applications

Jiachengjun Luo, Hushan Chand, Rafael Luque, Alina M. Balu and Gianvito Vilé

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202424514

3D-printing design for continuous flow catalysis

Daily Rodriguez-Padron, Awais Ahmad, Pablo Romero-Carrillo, Rafael Luque and Roberto Esposito

Trends in Chemistry, 2022, 4, 739
DOI: 10.1016/j.trechm.2022.05.005

Metal 3D Printed Nickel‐Based Self‐Catalytic Reactor for COx Methanation

Chengwei Wang, Xiaobo Peng, Yingluo He, Jiaqi Fan, Xingyi Lin, Lilong Jiang and Noritatsu Tsubaki

ChemCatChem, 2022, 14
DOI: 10.1002/cctc.202101581

Gas-tight means zero defects - design considerations for thin-walled fluidic devices with overhangs by laser powder bed fusion

Fabian Grinschek, Amal Charles, Ahmed Elkaseer, Christoph Klahn, Steffen G. Scholz and Roland Dittmeyer

Materials & Design, 2022, 223, 111174
DOI: 10.1016/j.matdes.2022.111174

Efficient 3D printing via photooxidation of ketocoumarin based photopolymerization

Xiaoyu Zhao, Ye Zhao, Ming-De Li, Zhong’an Li, Haiyan Peng, Tao Xie and Xiaolin Xie

Nat Commun, 2021, 12
DOI: 10.1038/s41467-021-23170-4

Multi-purpose structured catalysts designed and manufactured by 3D printing

Anna Lind, Ørnulv Vistad, Martin Fleissner Sunding, Kari Anne Andreassen, Jasmina Hafizovic Cavka and Carlos A. Grande

Materials & Design, 2020, 187, 108377
DOI: 10.1016/j.matdes.2019.108377

Additively manufactured structured perovskite/Al2O3 monolithic catalysts by digital light processing: design and application for CO2 methanation

Ting Chen, Yuxiang Liu, Xiaotong Zhu, Yuhuan He, Hongqiang Nian, Na Sha, Juan Shang, Aleksandar Staykov, Jindan Tian and Zhe Zhao

Applied Surface Science, 2026, 732, 166545
DOI: 10.1016/j.apsusc.2026.166545

3D-printing of integrated spheres as a superior support of phosphotungstic acid for deep oxidative desulfurization of fuel

Jie Zhu, Peiwen Wu, Linlin Chen, Jing He, Yingcheng Wu, Chao Wang, Yanhong Chao, Linjie Lu, Minqiang He, Wenshuai Zhu and Huaming Li

Journal of Energy Chemistry, 2020, 45, 91
DOI: 10.1016/j.jechem.2019.10.001

Three‐dimensional‐printed holistic reactors with fractal structure for heterogeneous reaction

Xueyan Sun, Zhigang Wang, Chong Li, Lijing Zhang, Wenbo Yang and Shengyang Tao

AIChE Journal, 2021, 67
DOI: 10.1002/aic.17298

Robocasting of ordered mesoporous silica‐based monoliths: Rheological, textural, and mechanical characterization

Emiliano S. Dal Molin, Laura M. Henning, Julian T. Müller, Glen J. Smales, Brian R. Pauw, Maged F. Bekheet, Aleksander Gurlo and Ulla Simon

Nano Select, 2023, 4, 615
DOI: 10.1002/nano.202300109

Liquid for Fused Deposition Modeling Technique (L-FDM)—A Revolution in Application Chemicals to 3D Printing Technology: Color and Elements

Robert E. Przekop, Ewa Gabriel, Daria Pakuła and Bogna Sztorch

Applied Sciences, 2023, 13, 7393
DOI: 10.3390/app13137393

Customizable 3D-printed stirrers for investigation, optimization and scale-up processes of batch emulsion copolymerizations

Sven Bettermann, Robin Stuhr, Hans-Ulrich Moritz and Werner Pauer

Chemical Engineering Science, 2019, 206, 50
DOI: 10.1016/j.ces.2019.05.026

Investigating copper impregnated 3D printed Al2O3 catalyst for methanol steam reforming

Putrakumar Balla, Daeseob Shin, Seon-Ju Park, Geunjae Kwak and Sungtak Kim

Fuel, 2025, 390, 134772
DOI: 10.1016/j.fuel.2025.134772

Structured Supports and Catalysts: Design, Preparation, and Applications

Marco Martino

Compounds, 2022, 2, 191
DOI: 10.3390/compounds2030014

Additive manufacturing of polymer-derived ceramics: Materials, technologies, properties and potential applications

Raghvendra Pratap Chaudhary, Chithra Parameswaran, Muhammad Idrees, Abolaji Sefiu Rasaki, Changyong Liu, Zhangwei Chen and Paolo Colombo

Progress in Materials Science, 2022, 128, 100969
DOI: 10.1016/j.pmatsci.2022.100969

Soft–Hard Composites for Bioelectric Interfaces

Yiliang Lin, Yin Fang, Jiping Yue and Bozhi Tian

Trends in Chemistry, 2020, 2, 519
DOI: 10.1016/j.trechm.2020.03.005

Catalyst Formation and In Operando Monitoring of the Electrocatalytic Activity in Flow Reactors

Christian Iffelsberger, Stefan Wert, Frank-Michael Matysik and Martin Pumera

ACS Appl. Mater. Interfaces, 2021, 13, 35777
DOI: 10.1021/acsami.1c09127

Highly structured 3D pyrolytic carbon electrodes derived from additive manufacturing technology

Babak Rezaei, Jesper Yue Pan, Carsten Gundlach and Stephan Sylvest Keller

Materials & Design, 2020, 193, 108834
DOI: 10.1016/j.matdes.2020.108834

Isolated metal atoms and clusters for alkane activation: Translating knowledge from enzymatic and homogeneous to heterogeneous systems

Lichen Liu and Avelino Corma

Chem, 2021, 7, 2347
DOI: 10.1016/j.chempr.2021.04.001

Bio-inspired channel configuration derived from morphological traits of thoracic ribcage and dendritic branching for bipolar plates of the proton exchange membrane fuel cell

Jing Lv, Weiwei Ge, Weili Sun, Haoyan Fang, Yong Zhang and Qingshan Liu

Process Safety and Environmental Protection, 2026, 207, 108374
DOI: 10.1016/j.psep.2025.108374

Synergistic effect of microbubble flow and light fields on a bionic tree-like photobioreactor

Luhaibo Zhao, Ci Peng, Jie Zhang and Zhiyong Tang

Chemical Engineering Science, 2021, 229, 116092
DOI: 10.1016/j.ces.2020.116092

Engineering Biosensors and Biomedical Detection Devices from 3D-Printed Technology

Minghui Liang, Xiang Liu, Yuying Chong, Ziyun Ye, Lei Zhao, Qiang Yu, Kai Tang, Anqi Geng, Bo Hu, Guanqun Ge and Shifang Yuan

ECS Sens. Plus, 2023, 2, 030604
DOI: 10.1149/2754-2726/ace5bd

Process Intensification of the Fischer-Tropsch synthesis using conductive packed POCS with skin: the role of the POCS design parameters

Martino Panzeri, Carlo Giorgio Visconti, Gianpiero Groppi and Enrico Tronconi

Chemical Engineering Journal, 2025, 521, 166359
DOI: 10.1016/j.cej.2025.166359

Visualization of Gas Chromatography–Mass Spectrometry Data Using 3D Printing Technology

A. S. Samokhin, A. I. Revelsky and R. S. Borisov

J Anal Chem, 2024, 79, 2031
DOI: 10.1134/S1061934824702034

Multiscale modelling of capillary imbibition in 3D-printed porous microfluidic channels

Agnese Piovesan, Ruben Nicasy, Tibo Arens, Bart Dequeker, Jeroen Soete, Clement Achille, Ruben Dochy, Cesar Parra Cabrera, Rob Ameloot, Pieter Verboven and Bart Nicolai

Microfluid Nanofluid, 2022, 26
DOI: 10.1007/s10404-022-02528-0

Comparison of thermo-hydraulic performance among different 3D printed periodic open cellular structures

S. Richard, D. Tasso, M. Rajana, A Saker, A. Ramirez Santos, C. Makhloufi, N. Meynet, B. Hary, S. Nardone, G. Marino, M. Thomas, C. Italiano, A. Vita and F. Gallucci

Chemical Engineering Journal, 2024, 492, 152005
DOI: 10.1016/j.cej.2024.152005

Foamed structured packing for mass-transfer equipment produced by an innovative 3D printing technology

D. Flagiello, D. Tammaro, A. Erto, P.L. Maffettone, A. Lancia and F. Di Natale

Chemical Engineering Science, 2022, 260, 117853
DOI: 10.1016/j.ces.2022.117853

Methodology for the Development of Additively Manufactured Packings in Thermal Separation Technology

Johannes Neukäufer, Florian Hanusch, Martin Kutscherauer, Sebastian Rehfeldt, Harald Klein and Thomas Grützner

Chem Eng & Technol, 2019, 42, 1970
DOI: 10.1002/ceat.201900220

MXene 3D/4D Printing: Ink Formulation and Electrochemical Energy Storage Applications

Shaista Nouseen and Martin Pumera

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202421987

Direct ink writing of Pd-Decorated Al2O3 ceramic based catalytic reduction continuous flow reactor

Xin Xu, Mengxing Zhang, Pan Jiang, Desheng Liu, Yixian Wang, Xing Xu, Zhongying Ji, Xin Jia, Haizhong Wang and Xiaolong Wang

Ceramics International, 2022, 48, 10843
DOI: 10.1016/j.ceramint.2021.12.301

Continuous fast 3D printing of SiOC ceramic components

Chong He, Cong Ma, Xilu Li, Feng Hou, Liwen Yan, Anran Guo and Jiachen Liu

Additive Manufacturing, 2021, 46, 102111
DOI: 10.1016/j.addma.2021.102111

Challenges and potentials for additive manufacturing of hydrogen energy components: A review

Lennart Mesecke, Ina Meyer, Marcus Oel and Roland Lachmayer

International Journal of Hydrogen Energy, 2025, 113, 198
DOI: 10.1016/j.ijhydene.2025.02.441

Design and catalytic performance of Ni catalyst for CO2 methanation based on DIW-3D printing

Ke Li, Yifan Zhang, Weixin Shen, Zhihao Liu, Qinxiang Ma, Jianli Zhang and Faliang Luo

Fuel, 2025, 380, 133129
DOI: 10.1016/j.fuel.2024.133129

Natural Products, the Fourth Industrial Revolution, and the Quintuple Helix

Sharna-kay Daley and Geoffrey A. Cordell

Natural Product Communications, 2021, 16
DOI: 10.1177/1934578X211003029

Hydrodynamics and mass transfer in metal‐foam micro‐packed beds: Implications for continuous aerobic oxidation

Xiaohui Zhang, Kang Qin, Zhuo Chen, Jian Chen and Jianhong Xu

AIChE Journal, 2026, 72
DOI: 10.1002/aic.70216

Additively manufactured packed bed device for process intensification of CO2 absorption and other chemical processes

Eduardo Miramontes, Lonnie J. Love, Canhai Lai, Xin Sun and Costas Tsouris

Chemical Engineering Journal, 2020, 388, 124092
DOI: 10.1016/j.cej.2020.124092

3D printing of hierarchically porous monolithic TS‐1 catalyst for one-pot synthesis of ethylene glycol

Cunbao Huo, Xiaoyong Tian, Yang Nan, Zhengping Qiu, Qi Zhong, Xiaokang Huang and Dichen Li

Chemical Engineering Journal, 2022, 450, 138259
DOI: 10.1016/j.cej.2022.138259

Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges

Liang-Yu Chen, Shun-Xing Liang, Yujing Liu and Lai-Chang Zhang

Materials Science and Engineering: R: Reports, 2021, 146, 100648
DOI: 10.1016/j.mser.2021.100648

Accounts in 3D‐Printed Electrochemical Sensors: Towards Monitoring of Environmental Pollutants

Jose Muñoz and Martin Pumera

ChemElectroChem, 2020, 7, 3404
DOI: 10.1002/celc.202000601

Intensification of catalytic reactors: A synergic effort of Multiscale Modeling, Machine Learning and Additive Manufacturing

Mauro Bracconi

Chemical Engineering and Processing - Process Intensification, 2022, 181, 109148
DOI: 10.1016/j.cep.2022.109148

Polymer-Grafted 3D-Printed Material for Enzyme Immobilization—Designing a Smart Enzyme Carrier

Daniela Eixenberger, Aditya Kumar, Saskia Klinger, Nico Scharnagl, Ayad W. H. Dawood and Andreas Liese

Catalysts, 2023, 13, 1130
DOI: 10.3390/catal13071130

The role of process intensification in the current business context of the chemical process industry

Jinu Joseph John, Jean Paul Gueneau de Mussy, Simon Kuhn and Tom Van Gerven

J Adv Manuf & Process, 2021, 3
DOI: 10.1002/amp2.10086

Porous 3D Printed Scavenger Filters for Selective Recovery of Precious Metals from Electronic Waste

Elmeri Lahtinen, Mikko M. Hänninen, Kimmo Kinnunen, Heikki M. Tuononen, Ari Väisänen, Kari Rissanen and Matti Haukka

Advanced Sustainable Systems, 2018, 2
DOI: 10.1002/adsu.201800048

Additive manufacturing for Proton Exchange Membrane (PEM) hydrogen technologies: merits, challenges, and prospects

Ahmad Baroutaji, Arun Arjunan, John Robinson, Mohammad Ali Abdelkareem and Abdul-Ghani Olabi

International Journal of Hydrogen Energy, 2024, 52, 561
DOI: 10.1016/j.ijhydene.2023.07.033

Impact of 3D printing materials on microalga Chlorella vulgaris

Victor Pozzobon, Franco Otaola, Clarisse Arnoudts and Jules Lagirarde

Bioresource Technology, 2023, 389, 129807
DOI: 10.1016/j.biortech.2023.129807

Exploring the 3D printing of molybdenum carbide-based catalysts for the reverse water gas shift reaction: A multi scale study

Arturo Pajares, Jacob Andrade-Arvizu, Disha Jain, Matteo Monai, Jasper Lefevere, Pilar Ramírez de la Piscina, Narcís Homs and Bart Michielsen

Chemical Engineering Journal, 2024, 482, 149048
DOI: 10.1016/j.cej.2024.149048

Consecutive Flow Distributor Device for Mesostructured Reactors and Networks of Reactors

Isabel S.O. Barbosa, Ricardo J. Santos, Cláudia G. Silva and Margarida S.C.A. Brito

Chemical Engineering and Processing - Process Intensification, 2021, 167, 108541
DOI: 10.1016/j.cep.2021.108541

Solution Mask Liquid Lithography (SMaLL) for One‐Step, Multimaterial 3D Printing

Neil D. Dolinski, Zachariah A. Page, E. Benjamin Callaway, Fabian Eisenreich, Ronnie V. Garcia, Roberto Chavez, David P. Bothman, Stefan Hecht, Frank W. Zok and Craig J. Hawker

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201800364

Recent Advances in the Development of Highly Conductive Structured Supports for the Intensification of Non-adiabatic Gas-Solid Catalytic Processes: The Methane Steam Reforming Case Study

Riccardo Balzarotti, Matteo Ambrosetti, Alessandra Beretta, Gianpiero Groppi and Enrico Tronconi

Front. Chem. Eng., 2022, 3
DOI: 10.3389/fceng.2021.811439

Gas flow through a packed bed with low tube-to-particle diameter ratio: Effect of pellet roughness

V. Papkov, N. Shadymov and D. Pashchenko

Physics of Fluids, 2024, 36
DOI: 10.1063/5.0183475

Processing Methods Used in the Fabrication of Macrostructures Containing 1D Carbon Nanomaterials for Catalysis

João Restivo, Olívia Salomé Gonçalves Pinto Soares and Manuel Fernando Ribeiro Pereira

Processes, 2020, 8, 1329
DOI: 10.3390/pr8111329

Design and Fabrication of Microarchitected Thermoelectric Generators: Prospects and Challenges

Saeed Asadikouhanjani, Ali Zolfagharian and Mahdi Bodaghi

Adv Eng Mater, 2024, 26
DOI: 10.1002/adem.202301609

The importance of additive technology and manufacturing processes for laboratory experiments in aeronautics

Shehret A. Tilvaldyev, Uzziel Caldiño Herrera, José Omar Dávalos Ramírez, Manuel Alejandro Lira Martinez and Edgar Alfonso Muñoz Avitia

I2+D, 2023, 23
DOI: 10.19053/1900771X.v23.n2.2023.16703

Rethinking steam methane reforming: catalytic innovations and sustainable hydrogen pathways

Ozge Yuksel Orhan, Ecenaz Karagoz and Osman Utku Celik

Chemical Engineering Communications, 2026, 1
DOI: 10.1080/00986445.2026.2637135