Issue 11, 2019

Rational design of free-standing 3D porous MXene/rGO hybrid aerogels as polysulfide reservoirs for high-energy lithium–sulfur batteries

Abstract

Lithium–sulfur (Li–S) batteries with a high theoretical energy density are attracting increasing attention as promising candidates for next-generation energy storage systems. However, the insulating nature and undesirable shuttle effect of sulfur species dramatically impede their practical applications. Herein, a unique 3D porous Ti3C2Tx MXene/rGO (MX/G) hybrid aerogel is rationally designed and applied for the first time as a free-standing polysulfide reservoir to improve the overall performance of Li–S batteries. In this strategy, highly conductive MXene and rGO are integrated into a 3D interconnected porous aerogel structure with efficient 2D polar adsorption interfaces, enabling fast Li+/electron transport and strong chemical anchoring of lithium polysulfides as well as enhanced redox reaction kinetics. The robust MX/G aerogel electrodes deliver excellent electrochemical performances including a high capacity of 1270 mA h g−1 at 0.1C, an extended cycling life up to 500 cycles with a low capacity decay rate of 0.07% per cycle, and a high areal capacity of 5.27 mA h cm−2.

Graphical abstract: Rational design of free-standing 3D porous MXene/rGO hybrid aerogels as polysulfide reservoirs for high-energy lithium–sulfur batteries

Supplementary files

Article information

Article type
Paper
Submitted
07 জানু 2019
Accepted
19 ফেব্রু 2019
First published
20 ফেব্রু 2019

J. Mater. Chem. A, 2019,7, 6507-6513

Rational design of free-standing 3D porous MXene/rGO hybrid aerogels as polysulfide reservoirs for high-energy lithium–sulfur batteries

J. Song, X. Guo, J. Zhang, Y. Chen, C. Zhang, L. Luo, F. Wang and G. Wang, J. Mater. Chem. A, 2019, 7, 6507 DOI: 10.1039/C9TA00212J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements