Ultrafast formation of ANFs with kinetic advantage and new insight into the mechanism

Lianqing Huang, Meiyun Zhang, Jingyi Nie, Bin Yang, Jiaojun Tan and Shunxi Song

Nanoscale Adv., 2022, 4, 1565
DOI: 10.1039/D1NA00897H

From plastic waste to new materials for energy storage

Ion Olazabal, Nicolas Goujon, Daniele Mantione, Marta Alvarez-Tirado, Coralie Jehanno, David Mecerreyes and Haritz Sardon

Polym. Chem., 2022, 13, 4222
DOI: 10.1039/D2PY00592A

Synchronous repair of intrinsic thermal conductivity and mechanical performance of aramid nanofiber films through hydrogen-bonding reconstruction

Niu Jiang, Yu-Yang Song, Mei-Yan Pu, Hong Cao, Ya-Jun Fu, Lu Bai, Jie Yang and Wei Yang

Mater. Horiz., 2026, 13, 4043
DOI: 10.1039/D5MH02042E

Aramid nanofiber–poly(vinyl alcohol) composite gel polymer electrolytes for lithium chloride-based supercapacitors

Yuseung Choi, Gilyong Shin, Eun Jae Nam, Ji Heon Hong, Byeong Jun So and Tae June Kang

Nanoscale, 2026, 18, 9050
DOI: 10.1039/D6NR00226A

Sustainable nanofibrous membranes for air filtration, water purification and oil removal

Nayli Erdeanna Binte Surat'man, Xin Lin Quek, Nannan Wang, Enyi Ye, Jianwei Xu, Zibiao Li and Bofan Li

Nanoscale, 2025, 17, 6427
DOI: 10.1039/D4NR04673K

Ultrafine aramid nanofibers prepared by high-efficiency wet ball-milling-assisted deprotonation for high-performance nanopaper

Gaojie Han, Bing Zhou, Zhaoyang Li, Yuezhan Feng, Chuntai Liu and Changyu Shen

Mater. Horiz., 2023, 10, 3051
DOI: 10.1039/D3MH00600J

Carboxylate-Decorated Multiwalled Carbon Nanotube/Aramid Nanofiber Film for Tunable Electromagnetic Interference Shielding Performance and Rapid Electric Heating Capacity

Fengfeng Jia, Zhaoqing Lu, Yuanqing Liu, Jiaoyang Li, Fan Xie and Jiayue Dong

ACS Appl. Polym. Mater., 2022, 4, 6342
DOI: 10.1021/acsapm.2c00570

Transforming waste aramid fibers and carbon fibers into aerogels for efficient solar-driven water desalination

Mandeep Singh, Si Qin, Ken Alren Usman, Lifeng Wang, Dan Liu, Yuxi Ma and Weiwei Lei

Solar Energy Materials and Solar Cells, 2025, 281, 113314
DOI: 10.1016/j.solmat.2024.113314

Fabrication of aramid nanofiber/silver nanoparticles composite aerogels for enhanced electromagnetic interference shielding

Mingyan Wang, Linlin Cheng, Jinxiao Hou, Shaojuan Chen, Liang Jiang and Yanfen Zhou

Chemical Engineering Journal, 2026, 539, 177122
DOI: 10.1016/j.cej.2026.177122

Preparation of Mechanically Strong Aramid Nanofiber Gel Film with Surprising Entanglements and Orientation Structure Through Aprotic Donor Solvent Exchange

Zeyu Chen, Chuying Yu and Wenbin Zhong

Materials, 2025, 18, 1142
DOI: 10.3390/ma18051142

AMNFs-driven hierarchical aramid network paper and regenerated aramid composite nanopaper: Green self-reinforcement and recycling

Wenqi Leng, Jinpeng Li, Daxian Cao, Bin Wang, Wenhua Gao, Jinsong Zeng, Jun Xu and Kefu Chen

Composites Part B: Engineering, 2026, 317, 113608
DOI: 10.1016/j.compositesb.2026.113608

Never-Dried Aramid Nanofibers Dispersed in Organic Solvents for Nanofiber-Reinforced Composites

Hyun Chan Kim, Dijia Zou and Henry A. Sodano

ACS Appl. Nano Mater., 2023, 6, 832
DOI: 10.1021/acsanm.2c05221

Aramid Nanofiber Aerogels: Versatile High Complexity Components for Multifunctional Composites

Mingqiang Wang, Shuhan Hu, Sangwok Bae, Volkan Cecen, Ahmet E. Emre, Zhengxiang Zhong, Li Liu, Carl Heltzel, Yudong Huang and Nicholas A. Kotov

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202502508

Ring-Opening Polymerization of a Seven-Membered Lactone toward a Biocompatible, Degradable, and Recyclable Semi-aromatic Polyester

Mao-Qin Li, Zi-Xuan Luo, Xiao-Yan Yu, Guo-Qiang Tian, Gang Wu, Si-Chong Chen and Yu-Zhong Wang

Macromolecules, 2023, 56, 2465
DOI: 10.1021/acs.macromol.2c02172

Construction of carboxylated aramid nanofiber protective layer for stable zinc anodes

Shang-Jie Yu, Wei-Jing Chen, Lizhi Song, Yajie Kou, Shan Wang, Jinlong Wu, Siqi Li, Li Hua and Zhaoqing Lu

Journal of Energy Storage, 2026, 141, 119025
DOI: 10.1016/j.est.2025.119025

Aramid Triboelectric Materials: Opportunities for Self‐Powered Wearable Personal Protective Electronics

Mingchao Chi, Chenchen Cai, Yanhua Liu, Song Zhang, Tao Liu, Guoli Du, Xiangjiang Meng, Bin Luo, Jinlong Wang, Yuzheng Shao, Shuangfei Wang and Shuangxi Nie

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202411020

In Situ Synthesis of Hydroxyapatite Nanowires on Para-Aramid Microgels for Fire-Resistant Insulating Films

Tiantian Chang, Yabo Cao, Chen Zhou, Weiwei Wang, Daofa Ying, Jun J. Tan, Qinghua Feng and Xinlin Tuo

ACS Appl. Polym. Mater., 2025, 7, 15507
DOI: 10.1021/acsapm.5c03193

Alignment Controlled Aramid Nanofiber‐Assembled Films

Ruowen Tu, Hyun Chan Kim, Osama A.H. Baabdullah and Henry A. Sodano

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202315422

Pure boron nitride nanotube thread-based woven textile for thermal neutron shielding with extreme thermal stability

Ki-Hyun Ryu, Minsung Kang, Nam-Ho You, Se Gyu Jang, Seokhoon Ahn and Dae-Yoon Kim

Adv Compos Hybrid Mater, 2024, 7
DOI: 10.1007/s42114-024-00986-4

Liquid Metal-Bridged MXene Modified Aramid Nanofiber Composite Film for Thermal Management

Tianyi Zhang, Tianyu Qiao, Jinyu Shan and Jianhua Ma

ACS Appl. Nano Mater., 2025, 8, 7760
DOI: 10.1021/acsanm.5c00744

Efficient mechanochemically for the preparation of high performance aramid nanofibers and KOH/DMSO superbase

Wenqi Li, Bin Wang, Siyuan Wang, Peng Wan, Peng Xie and Ding Chen

Applied Materials Today, 2023, 35, 102011
DOI: 10.1016/j.apmt.2023.102011

Upcycling p-Aramid Waste into Universal Antidripping Aramid Nanofiber Coatings for Future Mobility Interior Plastics

Hyeonjeong Kim, Hyeon Ji Kim and Youngho Eom

ACS Nano, 2025, 19, 26438
DOI: 10.1021/acsnano.5c03399

Thermally Insulating and Moisture‐Resilient Foams Based on Upcycled Aramid Nanofibers and Nanocellulose

Andi Di, Carina Schiele, Seyed Ehsan Hadi and Lennart Bergström

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202305195

Ultramicroporous covalent organic framework membranes with fortified hydrogen-bond networks for high-performance desalination

Yunqiu Zhou, Guishan Hu, Jingsi Yuan, Xiang Zhang, Jingwei Hou, Xueli Cao, Yatao Zhang, Shi-Peng Sun, Bart Van der Bruggen and Junyong Zhu

Nat Commun, 2026, 17
DOI: 10.1038/s41467-026-69779-1

Aramid Nanofiber‐Based Thermally Conductive Films: Nanofibrillation and Thermal Conductivity Improvement

Mei‐Yan Pu, Niu Jiang, Yu‐Yang Song, Shuang‐Zhu Li, Yuan‐Qi Ma, Lu Bai, Jie Yang and Wei Yang

Adv Funct Materials, 2026, 36
DOI: 10.1002/adfm.202521655

Nanoporous aramid colloidal aerogels: Design, fabrication, and performance

Jing Lyu, Lishan Li and Xuetong Zhang

Progress in Polymer Science, 2025, 163, 101945
DOI: 10.1016/j.progpolymsci.2025.101945

Printable solid-gel change composite materials with high latent heat, enhanced shape stability and combustion safety for efficient thermal management

Yinzhou Guo, Yuanyuan Chen, Chenhui Cui, Xiaoqing Ming, Qiang Zhang, Jiao Jiao, Yilong Cheng, Zhishen Ge and Yanfeng Zhang

Composites Science and Technology, 2026, 273, 111417
DOI: 10.1016/j.compscitech.2025.111417

Superelastic and thermal insulating multilayer organic-inorganic hybrid aerogel built from boron nitride nanoribbons and aramid nanofibers

Lei Feng, Peng Wei, Siyuan Ding, Qiang Song, Jiaxu Zhang, Chenhuan Wang, Liyuan Guo, Dongfang Xu and Haojie Song

Composites Science and Technology, 2023, 244, 110277
DOI: 10.1016/j.compscitech.2023.110277

Valorization of Waste Aramid Fibers: A Comparative Review of Deprotonation, Depolymerization, and Beyond

Fengfeng Jia, Zhaoqing Lu, Huimei Zhao, Tao Huang, Pengbo Yang, Chunting Li, Jingru Zhang, Jin Liu, Ruixue Pang and Li Hua

Polymer Reviews, 2026, 1
DOI: 10.1080/15583724.2026.2615633

Customize Aramid Nanofiber Aerogels with High Electromagnetic Shielding Performance from Ultra‐Malleable Kevlar‐Derived Jelly

Zongwen Zhang, Chunhui Wang, Yuanping Luo, Changxin Yuan and Wanbiao Hu

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300548

Ionic Liquid-Mediated Structural Regulation of Reverse Osmosis Membranes for Enhanced Antifouling Performance against Diverse Organic Foulants

Keke Liu, Yizhuo Li, Binyu Zhou, Yunqiu Zhou, Jingsi Yun, Xueli Cao, Shi-Peng Sun, Yatao Zhang, Yanling Liu and Junyong Zhu

Environ. Sci. Technol., 2026, 60, 4449
DOI: 10.1021/acs.est.5c16274

Different Effects of Mixing Manners on the Porous Structures and Dense Films of Waterborne Polyurethane Modified with Recycled Aramid Nanofibers

Yushang Song, Mengyu Zhang, Qianshu Wang, Zihang Tang, Longhai Guo, Jun Ye, Teng Qiu and Xinlin Tuo

ACS Appl. Polym. Mater., 2024, 6, 5496
DOI: 10.1021/acsapm.4c00701

The Synergistic Effect of Aramid Nanofibers and Carbon Nanotubes on Micro‐Silicon Anodes for Improved Stability and Conductivity

Qingqing Liu, Xiao Wei, Chen Yang, Changhaoyue Xu, Wenlong Cai and Feng Chen

Small, 2024, 20
DOI: 10.1002/smll.202403938

Uv–vis spectral characteristics of para-aramid fiber deprotonation products in KOH/DMSO system and their applications

Ning Yan, Zhiqiao Li, Xinsheng Chai and Zhaoqing Lu

Journal of Industrial and Engineering Chemistry, 2024, 134, 425
DOI: 10.1016/j.jiec.2024.01.006

An innovative strategy to enhance the interfacial interaction and effective contribution of BN in thermal conductivity in aramid based composites films

Yun Wei, Ming Wen, Yong Wen, Qichao Wen, Jie Wen, Qiang Fu and Hua Deng

Chemical Engineering Journal, 2024, 499, 156069
DOI: 10.1016/j.cej.2024.156069

In-situ synthesized aramid nanoparticles for multiscale fiber reinforcement of polymer composites

Wei Guo, Shifan Lu, Liangfan Gong, Zhiping Zhao, Changmei Sun, Cuiqing Teng, Ying Zhang, Rongjun Qu and Ying Wang

Polymer Testing, 2025, 153, 109032
DOI: 10.1016/j.polymertesting.2025.109032

Flexible microwave absorbing fabrics woven by high-strength graphene-based hybrid fibers with broadband electromagnetic response

Jingyuan Tang, Tian Li, Qian Liu, Jiani Du, Jiatong Li, Qing Qi and Fanbin Meng

Journal of Materials Science & Technology, 2024, 200, 93
DOI: 10.1016/j.jmst.2024.03.007

Poly(vinyl alcohol)/Gelatin-Based Eutectogels for the Sensitive Strain Sensor with Recyclability and Multienvironmental Suitability

Tiandi Chen, Xiaoxue Mai, Limin Ma, Zhangpeng Li, Jinqing Wang and Shengrong Yang

ACS Appl. Polym. Mater., 2022, 4, 3982
DOI: 10.1021/acsapm.2c00425

Template-Anchored Assembly of Superelastic Polyimide Hybrid Nanofiber Aerogel for Thermal Insulation

Yongkang Jin, Feng Xiong, Mulin Qin, Haiwei Han, Shenghui Han, Hsing Kai Chu, Kaihang Jia, Song Gao, Zhenghui Shen and Ruqiang Zou

Adv. Fiber Mater., 2025, 7, 799
DOI: 10.1007/s42765-025-00521-0

Recycling of inherently flame-resistant fabrics for protective clothing: A comprehensive review

GM Nazmul Islam, Dave Kasper, Ted Parker and Patricia I. Dolez

Cleaner Waste Systems, 2025, 12, 100331
DOI: 10.1016/j.clwas.2025.100331

A simple and cost-effective method to produce high-performance robust heat-resistant paper by directly synthesizing polyimide within cellulose paper matrixes

Ze Zhang, Junxian Zhang, Shuang Zhou, Haolan Liang, Fuyu Zhang, Yi Liu, Hao Liu, Gang Chen and Jinsong Tao

Chemical Engineering Journal, 2025, 508, 160885
DOI: 10.1016/j.cej.2025.160885

Millefeuille-inspired highly conducting polymer nanocomposites based on controllable layer-by-layer assembly strategy for durable and stable electromagnetic interference shielding

Shengdu Yang, Pengcheng Yang, Chuanzheng Ren, Xiaohai Zhao and Junhua Zhang

Journal of Colloid and Interface Science, 2022, 622, 97
DOI: 10.1016/j.jcis.2022.04.096

One-step exfoliation and deprotonation of ANF/BNNS suspension for constructing 3D vertically aligned skeleton in epoxy-based thermal management composites

GaoJie Han, PeiWen Xue, ZhengHao Cai, YueZhan Feng, ChunTai Liu and ChangYu Shen

Sci. China Technol. Sci., 2022, 65, 2675
DOI: 10.1007/s11431-022-2168-3

Polyurethane-reinforced recycled aramid aerogels: Multifunctional applications

Keyang Cui, Haining You, Tingshan Huang, Linghao Peng, Wenyu Zhang, Zhuo Chen, Tao Mei, Qinghua Zhao and Dong Wang

Composites Communications, 2025, 53, 102199
DOI: 10.1016/j.coco.2024.102199

Ice-Template-Assisted Anisotropic Aerogel Monoliths: An Assembly Strategy of Aramid Nanofibers

Chao Qiang, Minming Zou, Wenxing Luo, Jue Wang, Guangyu Zhu, Yifan Huang, Sifan Tan, Jinghui Fan, Baowen Fu, Peng Luo, Yan Ma, Wenjing Chen, Xiongxin Jiang, Qinglin Li and Xiaowu Hu

Langmuir, 2025, 41, 26903
DOI: 10.1021/acs.langmuir.5c03624

A novel sol-gel strategy for constructing wood fibers and aramid nanofiber nanocomposite with strong, tough and recyclable properties

Tao Liu, Zheng Liu, Zhezhe Zhou, Sheldon Q. Shi, John Tosin Aladejana, Shanshan Gong, Zhen Fang and Jianzhang Li

Composites Science and Technology, 2023, 238, 110026
DOI: 10.1016/j.compscitech.2023.110026

Fast and Massive Production of Aramid Nanofibers via Molecule Intercalation

Zi-Meng Han, YuanZhen Hou, Hao-Cheng Liu, Qing-Fang Guan, Huai-Bin Yang, Kun-Peng Yang, Chong-Han Yin, Zhang-Chi Ling, Yu-Xiang Zhao, Jun Xia, YinBo Zhu, HengAn Wu, Kody Whishant, Nicholas A. Kotov and Shu-Hong Yu

J. Am. Chem. Soc., 2025, 147, 7939
DOI: 10.1021/jacs.4c18620

Entanglement-guided assembly of aramid nanofibers into ultra-strong and ultra-tough macroscopic fibers

Changhua Yang, Can Liu, Hengtong Zhang and Min Nie

Chemical Engineering Journal, 2025, 522, 168300
DOI: 10.1016/j.cej.2025.168300

Precipitation 3D printing of all-aramid materials for high-strength, heat-resistant applications

Ruowen Tu, Hyun Chan Kim and Henry A. Sodano

Materials & Design, 2025, 249, 113547
DOI: 10.1016/j.matdes.2024.113547

Aramid nanofiber/liquid metal/Gd2O3 flexible films with magnetic-conductive interfaces for electromagnetic interference shielding and Joule heating

Xinyi Zhu, Haoyun Wang, Yang He, Xia Feng, Yiping Zhao and Li Chen

Composites Communications, 2025, 57, 102430
DOI: 10.1016/j.coco.2025.102430

Proton donor-induced phase deposition in aramid nanofiber membranes for efficient osmotic energy harvesting

Ning Yan, Rui-Xin Liu, Jia-Min Wu and Zhao-Qing Lu

Journal of Membrane Science, 2026, 742, 125142
DOI: 10.1016/j.memsci.2026.125142

Sustainable fabrication of closed-loop recyclable aramid paper with enhanced mechanical and breakdown strength

Qi Wan, Na Li, Hao Zhang, Yingwei Li, Junrong Yu, Yan Wang and Zuming Hu

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2026, 739, 140062
DOI: 10.1016/j.colsurfa.2026.140062

MXene‐Modified Aramid Aerogel for Advanced Solar Steam Generation

Mandeep Singh, Si Qin, Ken Aldren Usman, Lifeng Wang, Degang Jiang, Guoliang Yang, Dan Liu, Yuxi Ma and Weiwei Lei

Adv Energy and Sustain Res, 2024, 5
DOI: 10.1002/aesr.202300126

Resin-free aramid honeycombs with extraordinary microwave absorption, thermal insulation, flame retardant and mechanical performance

Hao Sun, Meiyun Zhang, Dexian Ji, Cong Ma, Baolong Yuan, Ronghua Feng, Jiaojun Tan and Bin Yang

Journal of Materials Science & Technology, 2025, 233, 132
DOI: 10.1016/j.jmst.2025.02.025

Finely regulated polyamide membranes with rapid water transport for low-pressure precise nanofiltration

Aiwen Zhang, Junyong Zhu, Shuangqiao Han, Yatao Zhang and Bart Van der Bruggen

Journal of Membrane Science, 2022, 662, 120987
DOI: 10.1016/j.memsci.2022.120987

Circular Economy in Safety and Protective Textiles: Feasibility and Prospects for Recycling Used Firefighting Protective Clothing

Xing Zhang, Hongjing Zhong, Zhenhao Sun, Hu Gu, Huifang Zhang, Xiaoxian Wang, Wenhao Wu, Hanxiao Niu, Yixuan Wei, Qilong Sun and Wei Ye

Sustainability, 2025, 18, 351
DOI: 10.3390/su18010351

Ambient pressure dried, light-weight and superelastic aramid nanofibers/graphene composite aerogels for fast adsorption of viscous oils

Yiwei Zhang, Libao Liu, Yi Huang, Hongyu Rong, Deyu Huang, Xu Liu, Xiaofang Zhang, Yonglai Lu, Jianming Zhang and Hongsheng Yang

Chemical Engineering Journal, 2025, 516, 164168
DOI: 10.1016/j.cej.2025.164168

Mechanically robust and electrolyte-stable 2D MOF-based nanocomposite membrane with rich low-resistance highways for high-performance osmotic energy harvesting

Chia-An Lung, Guang Hui Teoh, Wen-Hung Lin, Kalon Gopinadhan, Soorathep Kheawhom and Li-Hsien Yeh

Chemical Engineering Journal, 2026, 539, 177089
DOI: 10.1016/j.cej.2026.177089

A top-down and in situ strategy for intrinsic acicular nanostructure enhanced ultradurable superhydrophobic and anti-icing aramid fabric

Jin-Le Li, Fang Wang, Chun-Bo Li, Ren-Yi Sun, Mei-Lin Guo, Gang Wu, Fei Song and Yu-Zhong Wang

Chemical Engineering Journal, 2024, 484, 149569
DOI: 10.1016/j.cej.2024.149569

Development and characterization of sustainable safety gloves manufactured from recycled para-aramid blends

Muhammad Bilal Qadir, Muhammad Salman Sharif, Zulfiqar Ali, Zubair Khaliq, Hafsa Jamshaid, Usama Khalid, Amir Shahzad and Badar Munir Zaidi

International Journal of Occupational Safety and Ergonomics, 2026, 1
DOI: 10.1080/10803548.2026.2633875

Acid-assisted strategy towards reuse of waste polyimide materials for multi-scenario thermally insulating and high-strength functional applications

Yuhang Zhuang, Meixin Chen, Zehang Du, Shiying Chen, Kailai Xia, Liuyan Li, Ronglong Ye, Xiaolin Lyu, Zhixing Lu and Mingmao Wu

Surfaces and Interfaces, 2025, 71, 106946
DOI: 10.1016/j.surfin.2025.106946

Exploring the potential of aramid nanofibers in advancing green-engineered cementitious composites

Huayang Sun, Yan Wan, Zhichao Xu, Yanlin Huo, Minjie Jia and Yingzi Yang

Composites Part B: Engineering, 2025, 305, 112724
DOI: 10.1016/j.compositesb.2025.112724

Spacesuit Textiles from Extreme Fabric Materials: Aromatic Amide Polymer and Boron Nitride Nanotube Composite Fiber for Neutron Shielding and Thermal Management

Ki-Hyun Ryu, Minsung Kang, Jungwon Kim, Nam-Ho You, Se Gyu Jang, Kwang-Un Jeong, Seokhoon Ahn and Dae-Yoon Kim

Adv. Fiber Mater., 2024, 6, 1509
DOI: 10.1007/s42765-024-00432-6

Ambient Drying Route to Aramid Nanofiber Aerogels with High Mechanical Properties for Low-k Dielectrics

Yiting Liu, Mark Robertson, Zhe Qiang, Zheyi Meng, Changhuai Ye and Meifang Zhu

ACS Appl. Polym. Mater., 2023, 5, 866
DOI: 10.1021/acsapm.2c01806

Two-Dimensional Nanosheet-Enhanced Waterborne Polyurethane Eutectogels with Ultrastrength and Superelasticity for Sensitive Strain Sensors

Tiandi Chen, Rong Luo, Yufu Liu, Limin Ma, Zhangpeng Li, Caihong Tao, Shengrong Yang and Jinqing Wang

ACS Appl. Mater. Interfaces, 2022, 14, 40276
DOI: 10.1021/acsami.2c08331

Fully Recyclable Aramid Fiber-Reinforced Composites with Superior Tearing Resistance Enabled by Reversibly Cross-Linked Poly(boron-urethane) Elastomer

Hao Chen, Xiao-Long Zhang, Jianyu Liu, Jie Liu, Xiaoli Liu, Zhirong Xin and Chunyang Bao

Ind. Eng. Chem. Res., 2026, 65, 2205
DOI: 10.1021/acs.iecr.5c04410

Hyperelastic Kevlar Nanofiber Aerogels as Robust Thermal Switches for Smart Thermal Management

Peiying Hu, Jing Wang, Peigen Zhang, Fushuo Wu, Yingying Cheng, Jin Wang and ZhengMing Sun

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202207638

Development of flame‐retardant and heat‐resistant aramid nanofiber reinforced rigid polyurethane foam aerogel

Xi Wang, Chunmei Song, Jiaxuan Yang, Bo Chen, Hongjin Song, Zhenghao Chen, Zhishun Yang and Yifei Yang

Vinyl Additive Technology, 2025, 31, 1398
DOI: 10.1002/vnl.22230

Aramid Nanofiber and Boron Nitride Nanosheet Composite Films for Mechanical and Dielectric Insulation Application

Nan Li, Zhaoqing Lu, Xingxiang Ji, Doudou Ning, Ning Yan and Songfeng E

ACS Appl. Nano Mater., 2024, 7, 9925
DOI: 10.1021/acsanm.3c05821

Aramid Fiber-Reinforced Plastics (AFRPs) in Aerospace: A Review of Recent Advancements and Future Perspectives

Xinning Xu, Yanbing Guo, Zhikang Shen, Boyang Liu, Fei Yan and Ning Zhong

Polymers, 2025, 17, 2254
DOI: 10.3390/polym17162254

Dissolution of para-aramid in DMSO/TBAF solution: process monitoring and mechanism

Haoyang Wang, Chang Cui, Ran He, Yuexi Chen, Zhao-Xia Guo, Baohua Guo and Xinlin Tuo

Polymer, 2025, 338, 129046
DOI: 10.1016/j.polymer.2025.129046

Aramid nanofiber-based functional composite materials: Preparations, applications and perspectives

Hui Zhang, Meiyun Zhang, Jinbao Li, Bin Yang, Syed Comail Abbas, Chenglong Fu, Ting Chen, Yuanyuan Xia, Jiawei Liu, Xiaoyun Du, Zhibin He and Yonghao Ni

Composites Part B: Engineering, 2024, 271, 111151
DOI: 10.1016/j.compositesb.2023.111151

Facile, high-efficiency, and low-cost depolymerization of PA6 to ϵ-caprolactam enables closed-loop chemical recycling

Xiao-He Chen, Gang Wu, Si-Chong Chen and Yu-Zhong Wang

Polymer, 2023, 283, 126201
DOI: 10.1016/j.polymer.2023.126201

Resource Recovery from High-Performance Textile Waste: Carbon Footprint Assessment, Graded Recycling, and Product Development Pathway for Used Firefighting Protective Clothing

Xing Zhang, Zhenhao Sun, Xiaoxian Wang, Jingru Lu, Hu Gu, Hongjing Zhong, Xiaoyun Long, Qilong Sun and Wei Ye

Materials, 2026, 19, 1188
DOI: 10.3390/ma19061188

Design strategy of super tough hydrophobic bamboo framework composites with internal network entanglement reinforcing structure

Guoying Liu, Junyue Shan, Lijun Cao, Hangqi Zhao, Ce Sun, Haiyan Tan and Yanhua Zhang

Chemical Engineering Journal, 2024, 500, 156968
DOI: 10.1016/j.cej.2024.156968

Metal ion-assisted fabrication of aramid nanofilm with high strength and toughness for the dye separation

Nan Li, Zhaoqing Lu, Xingxiang Ji, Doudou Ning and Songfeng E

Composites Communications, 2023, 43, 101702
DOI: 10.1016/j.coco.2023.101702

Fabrication of Highly Dispersed Aramid Nanofibers Based on Cation-Exchange Resin as a Proton Donor: Low Energy Consumption, Solvent Closed-Loop Recovery

Ning Yan, Jiamin Wu, Li Hua, Ting Gao, Ruixin Liu and Zhaoqing Lu

Langmuir, 2025, 41, 20105
DOI: 10.1021/acs.langmuir.5c02354

Multifunctional robust aerogel separator towards high-temperature, large-rate, long-cycle lithium-ion batteries

Mei-Chen Liu, Hui-Jun Chen, Gang Wu, Xiu-Li Wang and Yu-Zhong Wang

Chinese Chemical Letters, 2023, 34, 107546
DOI: 10.1016/j.cclet.2022.05.060

Synergistic exfoliation-deprotonation strategy for ANF/BNNS nanocomposite paper with simultaneous ultrahigh thermal conductivity and wear resistance

Rui Tian, Xiaohua Jia, Zhiqiang Shan, Jin Yang, Zemin He, Fangmin Wang, Hao Ma and Haojie Song

Polymer, 2025, 336, 128942
DOI: 10.1016/j.polymer.2025.128942

Pre-Envelope-Coating Strategy for Preparing the Boron Nitride Aramid Nanofiber Thermal-Insulating Composite Paper

Yuxin Qin, Wei Ren, Huaxing Mao, Xiaoyun Du, Gengmei Liu, Dingwen Yin, Xia Wang and Jinbao Li

ACS Appl. Nano Mater., 2025, 8, 17451
DOI: 10.1021/acsanm.5c02877

Two-step re-protonation strategy to fabricate aramid nanofiber sheet (ANFS) based high performance composite film

Yun Wei, Xin Chen, Zijian Dai, Minhan Cheng, Qiang Fu and Hua Deng

Composites Science and Technology, 2024, 248, 110480
DOI: 10.1016/j.compscitech.2024.110480

Hydrogen bond-regulated dissociation of aramid fibers for high-strength hierarchical aerogels with superior thermal and acoustic properties

Yanyan Wang, Xiaoqing Yin, Nan Pang, Xiaomin Yuan, Yong Xu, Meijie Yu and Chengguo Wang

Chemical Engineering Journal, 2025, 524, 169598
DOI: 10.1016/j.cej.2025.169598

Regulation of protonation in aramid nanofiber films for improved mechanical properties

Yuseung Choi, Gilyong Shin, Ju Hwan Lee, Hyeong Jun Kim, Byeong Jun so, Hoyeon Lee, Jei Gyeong Jeon and Tae June Kang

Funct. Compos. Struct., 2024, 6, 045009
DOI: 10.1088/2631-6331/ad8ea6

Room temperature 3D printing of high-temperature engineering polymer and its nanocomposites with porosity control for multifunctional structures

Hyun Chan Kim, Ruowen Tu and Henry A. Sodano

Composites Part B: Engineering, 2024, 279, 111444
DOI: 10.1016/j.compositesb.2024.111444

Rheology-tailored stable aramid nanofiber suspensions for fabricating ultra-strong and electrically insulated additive-free nanopapers

Juhyeon Song, Hyeonjeong Kim, Seung Hwan Lee, Ohuk Lee, Hyo Jeong Kim, Yong Jeong, Han Gi Chae, Jaseung Koo, Seunggun Yu and Youngho Eom

Chemical Engineering Journal, 2023, 475, 146394
DOI: 10.1016/j.cej.2023.146394

Preparation and application of recyclable polymer aerogels from styrene-maleic anhydride alternating copolymers

Yuan Yao, Xiaohong Zhang, Zhaoyan Guo, Wenlu Liu, Chenxi Hu, Yue Ru, Liangdong Zhang, Chao Jiang and Jinliang Qiao

Chemical Engineering Journal, 2023, 455, 140363
DOI: 10.1016/j.cej.2022.140363

Biomass-derived closed-loop recyclable chemically crosslinked polymer composites for green soft electronics

Dokyung Woo, Nawon Kang, Hyeongmin Park, Sumin Myoung, Giwon Lee, Jin Kon Kim and Chungryong Choi

Chemical Engineering Journal, 2024, 488, 150818
DOI: 10.1016/j.cej.2024.150818

Double-oil-capture design of upcycling waste PP into pH sensitivity and sustainable aerogel for oil-water separation

Xuejie Yue, Qi Xiong, Yuting Dai, Dongya Yang, Songlin Xue, Tao Zhang and Fengxian Qiu

Journal of Environmental Chemical Engineering, 2025, 13, 115204
DOI: 10.1016/j.jece.2024.115204

Flame-retardant and electromagnetic-interference-shielding silver nanowire/silicon dioxide/aramid nanofiber/sodium alginate lightweight porous composite for wearable sensors

Xinxin Cai, Hui Liu, Wen Li, Jiwen Hu, Xiaobin Li and Shudong Lin

Carbohydrate Polymers, 2026, 379, 125034
DOI: 10.1016/j.carbpol.2026.125034

Scalable Sol–Gel Permeation Assembly of Phase Change Layered Film Toward Thermal Management and Light‐Thermal Driving Applications

Gaojie Han, Hongli Cheng, Yajie Cheng, Bing Zhou, Chuntai Liu and Yuezhan Feng

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202401295

Ultra‐High Toughness Fibers Using Controlled Disorder of Assembled Aramid Nanofibers

Hyun Chan Kim and Henry Angelo Sodano

Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202208661

Non-Solvent-Induced Self-Assembly of Para-Aramid Nanofibers with Tunable Molecular Weight for Enhanced Thermal Stability and Electrical Insulation

Jianwen Tong, Ran He, Chang Cui, Boxuan Yu, Yanhui Dong, Teng Qiu and Xinlin Tuo

ACS Appl. Nano Mater., 2025, 8, 13457
DOI: 10.1021/acsanm.5c02199

Closed loop recycling of electrically damaged meta-aramid papers with high electrical insulation and mechanical strength

Fangcheng Lv, Lvqian Fu, Qibin Wang, Kaixuan Sun, Rui Yang, Sidi Fan and Xiang Yu

Composites Science and Technology, 2024, 254, 110688
DOI: 10.1016/j.compscitech.2024.110688

Lightweight and Flexible Fabric Assembled by ANF/GMWCNT Fibers for Broadband Electromagnetic Wave Absorption

Tao Chen, Yuefeng Yan, Siqian Liu, Ziyan Cheng, Boshi Gao, Dechang Jia, Yu Zhou and Xiaoxiao Huang

Adv Funct Materials, 2026, 36
DOI: 10.1002/adfm.202528094

3D Printable high-strength aramid nanofiber reinforced composites via vat photopolymerization

Sanghyuk Lee, Hyeokbae Kwon and Hyun-Taek Lee

Int. J. Precis. Eng. Manuf., 2026, 27, 317
DOI: 10.1007/s12541-025-01351-1

Scalable Fabrication of Anisotropic Heterocyclic Aramid Nanofiber Films with Ultrahigh Toughness for Insulation and Thermal Management Applications

Nan Li, Zhaoqing Lu, Doudou Ning, Li Hua and Songfeng E

ACS Appl. Mater. Interfaces, 2025, 17, 41164
DOI: 10.1021/acsami.5c10044

Polyarylate Nanofiber-Mediated Closed-Loop Recyclable PMIA Nanocomposite Honeycombs with Exceptional Strength and Extreme-Condition Stability

Jingxian Wang, Hanwen Zhang, Bo Yuan, Xuyang Yan, Yixuan Lin, Luoxin Wang, Hua Wang and Siwei Xiong

ACS Appl. Polym. Mater., 2026, 8, 7827
DOI: 10.1021/acsapm.6c01280

Sustainable Recycling of Waste Para-aramid Fabric into Polyarylate Nanofiber Sealed High Performance Insulation Paper

Qian Hu, Liang Cheng, Jingxian Wang, Hanwen Zhang, Luoxin Wang, Hua Wang and Siwei Xiong

ACS Appl. Polym. Mater., 2026, 8, 4966
DOI: 10.1021/acsapm.6c00010