Issue 3, 2020

Printed recyclable and self-poled polymer piezoelectric generators through single-walled carbon nanotube templating

Abstract

With an increasing global energy demand, along with a rising uptake of portable electronic devices, it is of great importance to investigate the viability of alternative energy harvesting technologies. Flexible piezoelectric generators (PEGs) are able to convert mechanical energy to electricity, making them an ideal candidate to decrease reliance on conventional energy sources and to power flexible, portable and implantable electronics. In this study, we show a low-energy production pathway for transparent PEGs based on poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) via shear-induced alignment of its dipoles through extrusion printing, complemented by spatial dipolar templating onto single-walled carbon nanotubes (SWCNTs) at low concentrations (<0.05 wt%). The resulting composite PEGs show up to a 500% enhancement in the piezoelectric charge coefficient d33 relative to extrusion printed pristine PVDF-TrFE, with similar enhancements in energy harvesting, exhibiting a power density of up to 20 μW cm−3 at 0.02 wt% SWCNTs. The extrusion printed composite PEGs show recyclability using only a green solvent (acetone) and are found to exhibit piezoelectric energy harvesting with a power density of up to 71 μW cm−3 upon reprinting, overcoming two of the most significant hurdles towards commercial production of flexible PEGs.

Graphical abstract: Printed recyclable and self-poled polymer piezoelectric generators through single-walled carbon nanotube templating

Supplementary files

Article information

Article type
Paper
Submitted
21 محرم 1441
Accepted
15 ربيع الثاني 1441
First published
16 ربيع الثاني 1441

Energy Environ. Sci., 2020,13, 868-883

Printed recyclable and self-poled polymer piezoelectric generators through single-walled carbon nanotube templating

N. A. Shepelin, P. C. Sherrell, E. Goudeli, E. N. Skountzos, V. C. Lussini, G. W. Dicinoski, J. G. Shapter and A. V. Ellis, Energy Environ. Sci., 2020, 13, 868 DOI: 10.1039/C9EE03059J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements