Issue 41, 2019

Trimetallic palladium–copper–cobalt alloy wavy nanowires improve ethanol electrooxidation in alkaline medium

Abstract

Recently, engineering high performance Pd-based nanocatalysts for alkaline ethanol fuel cells has attracted wide attention. Here, we report a one-pot synthesis of low-palladium ternary palladium–copper–cobalt (PdCuCo) alloy nanowires (NWs) with a diameter of ∼4.0 nm to improve the mass activity (MA) of ethanol electrooxidation in alkaline medium. The MA (7.45 A mg−1) of the Pd31Cu61Co8 NWs is 8.5-fold and 12.4-fold that of commercial Pd black and Pd/C, respectively. The reaction mechanism of the EOR and the reasons for the activity enhancement on Pd31Cu61Co8 NWs are elucidated based on the results of in situ Fourier transform infrared spectroscopy and structure characterization. Besides the electronic effect and surface defect sites, the coexistence of surface Cu and Co that have high capacities to activate water to produce reactive oxygen species is another key factor. This study shows an example of how to design low-palladium ternary PdCuCo NWs as improved anode electrocatalysts for alkaline direct ethanol fuel cells with high mass activity.

Graphical abstract: Trimetallic palladium–copper–cobalt alloy wavy nanowires improve ethanol electrooxidation in alkaline medium

Supplementary files

Article information

Article type
Paper
Submitted
14 شوال 1440
Accepted
14 ذو الحجة 1440
First published
15 ذو الحجة 1440

Nanoscale, 2019,11, 19448-19454

Trimetallic palladium–copper–cobalt alloy wavy nanowires improve ethanol electrooxidation in alkaline medium

F. Zhao, C. Li, Q. Yuan, F. Yang, B. Luo, Z. Xie, X. Yang, Z. Zhou and X. Wang, Nanoscale, 2019, 11, 19448 DOI: 10.1039/C9NR05120A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements