Issue 8, 2018

Selenium embedded in MOF-derived N-doped microporous carbon polyhedrons as a high performance cathode for sodium–selenium batteries

Abstract

Selenium cathodes have attracted much more attention due to their much higher electronic conductivity and comparable volumetric capacity when compared with sulfur cathodes. However, selenium cathodes still suffer from low utilization of active materials, high volume changes and the shuttle effect of polyselenides, resulting in rapid capacity fading. Herein, we prepared selenium–carbon composites as cathodes for sodium–selenium batteries to improve the utilization of selenium by embedding selenium in ZIF-8 derived N-doped microporous carbon polyhedrons (denoted as Se@N-MCPs). The N-MCPs could effectively accommodate the volume change of Se@N-MCPs, and alleviate the shuttle effect of polyselenides. The Se@N-MCP cathodes deliver an excellent discharge capacity of 612 mA h g−1 after 100 cycles at a current density of 0.1 A g−1 and a superior rate capability of 496 mA h g−1 at 5 A g−1 for Na–Se batteries. In addition, they also show a superior cycling life of ∼460 mA h g−1 at the current density of 1 A g−1 after 500 cycles with only 0.049% capacity decline per cycle.

Graphical abstract: Selenium embedded in MOF-derived N-doped microporous carbon polyhedrons as a high performance cathode for sodium–selenium batteries

Supplementary files

Article information

Article type
Research Article
Submitted
03 شعبان 1439
Accepted
04 شوال 1439
First published
05 شوال 1439

Mater. Chem. Front., 2018,2, 1574-1582

Selenium embedded in MOF-derived N-doped microporous carbon polyhedrons as a high performance cathode for sodium–selenium batteries

S. Li, H. Yang, R. Xu, Y. Jiang, Y. Gong, L. Gu and Y. Yu, Mater. Chem. Front., 2018, 2, 1574 DOI: 10.1039/C8QM00177D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements