Issue 9, 2018

Mercury determination in soil and sludge samples by HR CS GFAAS: comparison of sample preparation procedures and chemical modifiers

Abstract

Mercury (Hg) is an admittedly toxic element. From an analytical viewpoint, Hg volatility makes preparation of samples containing Hg as well as Hg detection therein a challenging task. The quality of the results is mainly associated with sample pretreatment. Moreover, there are difficulties inherent to thermal stabilization in the graphite furnace during atomic absorption. Here, Hg was determined in different samples (clay soil, sewage sludge, and light sandy soil) by high-resolution continuum source graphite furnace atomic absorption spectroscopy (HR CS GFAAS). Three different sample preparation methods were investigated: slurry, microwave acid digestion with HF and HNO3 (which resulted in total sample decomposition), and acid leaching with aqua regia. Different chemical modifiers (palladium nanoparticles (PdNPs), Pd(II) solution, gold nanoparticles (AuNPs), and Au(III) solution) were tested, and their efficiencies were compared. Both the slurry method and acid leaching with aqua regia prevented Hg loss and yielded satisfactory results as compared to the certified, indicative or spiked concentrations of all the samples (confidence level 95%), using AuNPs as a chemical modifier. The Au–Hg amalgam resulting from a Hg(II) reduction in the AuNP surface leads to diffusion and alloying. Hg determination in the sewage sludge sample agreed with the certified value for all studied modifiers, when the sample is prepared by aqua regia leaching and slurry. Pd(II) solution and PdNPs also provided good results, but under specific conditions. Pd(II) binds to the analyte, thereby avoiding Hg loss during the pyrolysis step. As for AuNPs, they are an effective modifier because they enhance the interaction between the clusters formed after pyrolysis and prevent Hg loss, confirming the potential for application of these modifiers.

Graphical abstract: Mercury determination in soil and sludge samples by HR CS GFAAS: comparison of sample preparation procedures and chemical modifiers

Supplementary files

Article information

Article type
Paper
Submitted
29 شعبان 1439
Accepted
19 شوال 1439
First published
21 شوال 1439

J. Anal. At. Spectrom., 2018,33, 1477-1485

Mercury determination in soil and sludge samples by HR CS GFAAS: comparison of sample preparation procedures and chemical modifiers

L. R. Rosa Souza, M. B. Teixeira Zanatta, I. Amoroso da Silva and M. A. Mesquita Silva da Veiga, J. Anal. At. Spectrom., 2018, 33, 1477 DOI: 10.1039/C8JA00152A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements