Issue 23, 2017

In situ identification of kinetic factors that expedite inorganic crystal formation and discovery

Abstract

Navigating the kinetic landscape is a key to reaching complex inorganic phases efficiently. High-temperature treatment of elemental mixtures is the traditional method of solid-state syntheses, where thermodynamic driving forces are large, but success can be hampered by kinetic barriers. Successful inorganic crystal preparation relies on methods to either surmount such barriers, or direct the reaction to avoid them. Both approaches were utilized in our synthetic investigation with in situ X-ray diffraction (XRD) using Fe2SiS4 as the target compound. In this system, Si sulfidation is the limiting factor preventing thermodynamic Fe2SiS4 crystal formation. Through in situ XRD reaction maps, we established that superheated S liquid from the FeS2 peritectic at 743 °C was responsible for the onset of rapid Fe2SiS4 formation. Alternatively, by pre-reacting Si with Fe, we directed the chemical system via intermediate states that expedited Fe2SiS4 formation at temperatures as low as 550 °C. The utilization of these kinetic expediting factors, and those that can be uncovered by similar methods, can improve the potential of the solid state method for creating new materials and refining chemical syntheses.

Graphical abstract: In situ identification of kinetic factors that expedite inorganic crystal formation and discovery

Article information

Article type
Paper
Submitted
14 صفر 1438
Accepted
17 ربيع الأول 1438
First published
17 ربيع الأول 1438

J. Mater. Chem. C, 2017,5, 5709-5717

In situ identification of kinetic factors that expedite inorganic crystal formation and discovery

Z. Jiang, A. Ramanathan and D. P. Shoemaker, J. Mater. Chem. C, 2017, 5, 5709 DOI: 10.1039/C6TC04931A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements