Issue 18, 2017

Controlling silicone-saccharide interfaces: greening silicones

Abstract

Silicone elastomers, which are normally crosslinked using metal catalysts, are traditionally reinforced with mineral fillers. We report that renewable saccharides can instead be used to both crosslink and reinforce silicones. The grafting of boronic acids to silicone polymers gives materials that, when added to aqueous solutions of mono- or polysaccharides, without catalysts, generated elastomers via the boronic acid interaction with saccharides. The efficiency of crosslinking, as shown by Young's moduli, depended strongly on the specific saccharide and the density of boronic acid groups on the silicone. Simple silicones normally phase separate in water saccharide mixtures. However, pretreatment of silicone boronates with the saccharide phytoglycogen, followed by exposure to water, led to stable aqueous phytoglycogen/silicone dispersions (pastes). The different outcomes arising from the order of addition are attributed to better dispersion of the silicone and saccharide in the latter case. Rheological studies of the pastes showed that, unlike the elastomers, viscosities depended more on the fraction of silicone in saccharide; number of boronic acid contact points between the silicone and saccharide was only a minor contributor. The equilibrium concentration of sugar/boronate contacts, which stabilize the water/oil interfaces, remains high even at high concentrations of water and even when the specific binding constant for an individual saccharide is low.

Graphical abstract: Controlling silicone-saccharide interfaces: greening silicones

Supplementary files

Article information

Article type
Paper
Submitted
16 شوال 1438
Accepted
17 ذو القعدة 1438
First published
17 ذو القعدة 1438

Green Chem., 2017,19, 4373-4379

Controlling silicone-saccharide interfaces: greening silicones

B. Macphail and M. A. Brook, Green Chem., 2017, 19, 4373 DOI: 10.1039/C7GC02088K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements