The size effect of TiO2 nanoparticles on a printable mesoscopic perovskite solar cell

Ying Yang; Kwangho Ri; Anyi Mei; Linfeng Liu; Min Hu; Tongfa Liu; Xiong Li; Hongwei Han

doi:10.1039/C4TA07030E

You do not have JavaScript enabled. Please enable JavaScript to access the full features of the site or access our non-JavaScript page.

The size effect of TiO₂ nanoparticles on a printable mesoscopic perovskite solar cell†

Ying Yang,^a Kwangho Ri,^a Anyi Mei,^a Linfeng Liu,^a Min Hu,^a Tongfa Liu,^a Xiong Li^a and Hongwei Han*^a

Author affiliations

* Corresponding authors

^a Michael Grätzel Center for Mesoscopic Solar Cells, Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, Hubei, P. R. China
E-mail: hongwei.han@mail.hust.edu.cn
Tel: +86 27 8779 3027

Abstract

The size effect of the TiO₂ photoanode has been investigated on the hole-conductor-free fully printable mesoscopic perovskite solar cells based on the carbon counter electrode and (5-AVA)_x(MA)_1−xPbI₃ perovskite. With TiO₂ nanoparticles with an optimized diameter of 25 nm, a champion device exhibits an efficiency of 13.41%.

This article is part of the themed collection: Perovskite Solar Cells

Download options Please wait...

Supplementary files

Supplementary information PDF (817K)

Article information

DOI: https://doi.org/10.1039/C4TA07030E
Article type: Communication
Submitted: 30 صفر 1436
Accepted: 03 ربيع الثاني 1436
First published: 06 ربيع الثاني 1436

Download Citation

J. Mater. Chem. A, 2015,3, 9103-9107

Author version available

Download author version (PDF)

Permissions

Request permissions

The size effect of TiO₂ nanoparticles on a printable mesoscopic perovskite solar cell

Y. Yang, K. Ri, A. Mei, L. Liu, M. Hu, T. Liu, X. Li and H. Han, J. Mater. Chem. A, 2015, 3, 9103 DOI: 10.1039/C4TA07030E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Social activity

Fetching data from CrossRef.
This may take some time to load.

Journal of Materials Chemistry A