Issue 38, 2014

Phosphorescent oxygen sensors produced by spot-crazing of polyphenylenesulfide films

Abstract

Phosphorescent oxygen sensors based on PtBP and PdBP dyes encapsulated in polyphenylenesulfide (PPS) films by the spot-crazing method are described. The new polymer matrix enables simple, one-step production of discrete, high-performance O2 sensors using a low toxicity solvent 2-butanone, low overall strain (8%), low amounts of solvent and precise spatial control. The resulting nano-structured sensor materials display markedly enhanced brightness, high photo-, mechanical and chemical stability. Their structural and physico-chemical properties were characterized by differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), optical microscopy and phosphorescence lifetime imaging microscopy (PLIM). The PPS sensors show a high degree of lateral and in-depth homogeneity on the micro- and macro-scale, as revealed by confocal microscopy, linear Stern–Volmer plots and single-exponential decays. Operating in phosphorescence lifetime mode, optimised sensors show stable O2 calibrations in the range of 0.1–100 kPa O2, low temperature dependence (linear in the range 10–50 °C), low cross-sensitivity to humidity and high reproducibility (RSD 1.5% at 21 kPa and 0.5% at zero O2). This technology facilitates the production of low-cost disposable O2 sensors and their integration in large scale industrial applications such as packaging.

Graphical abstract: Phosphorescent oxygen sensors produced by spot-crazing of polyphenylenesulfide films

Article information

Article type
Paper
Submitted
01 رمضان 1435
Accepted
24 رمضان 1435
First published
26 رمضان 1435

J. Mater. Chem. C, 2014,2, 8035-8041

Author version available

Phosphorescent oxygen sensors produced by spot-crazing of polyphenylenesulfide films

C. Toncelli, O. V. Arzhakova, A. Dolgova, A. L. Volynskii, J. P. Kerry and D. B. Papkovsky, J. Mater. Chem. C, 2014, 2, 8035 DOI: 10.1039/C4TC01390E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements