Issue 23, 2024

MXenes as a hole transport interfacial layer for efficient and air-stable quasi-2D perovskite solar cells

Abstract

Despite the high performance of bulk hybrid perovskites, the material/device stability is a critical issue originating from the perovskites’ degradation when exposed to an open-air atmosphere. 2D/quasi-2D perovskite materials have attracted much attention due to their high stability under ambient conditions compared to the bulk perovskite. Along with 2D perovskite, various charge transport materials, and additives were also employed in perovskite solar cells (PSCs). We carried out one such approach in this work, where Ti3C2Tx a typical representative of the 2-D family, called MXenes, has been employed as a passivation/interfacial layer between the quasi-2D perovskite and the hole transport layer. A PSC, passivated with MXenes, shows over 9% relative improvement in the performance and very high stability (∼99%) in an open-air atmosphere over 50 days as compared to its pristine device. The detailed investigation suggests the role of MXene as a passivator, an energy aligner, and a barrier to reduce the non-radiative recombination loss, provide pathways for effortless hole transportation, and protect from external environmental factors respectively. Moreover, transient absorption studies reveal that adding MXenes also affects the distribution and lifetime of quasi-2D phases in PSCs. As we delve into specific applications, such as the integration of MXenes as passivator/HTL interfacial layers in 2-D PSCs, we unlock the potential for enhanced device performance, showcasing MXenes as a driving force in the evolution of stable solar cell technologies.

Graphical abstract: MXenes as a hole transport interfacial layer for efficient and air-stable quasi-2D perovskite solar cells

Supplementary files

Article information

Article type
Paper
Submitted
21 رجب 1445
Accepted
10 ذو القعدة 1445
First published
23 ذو القعدة 1445

J. Mater. Chem. C, 2024,12, 8357-8367

MXenes as a hole transport interfacial layer for efficient and air-stable quasi-2D perovskite solar cells

S. Sahare, M. Solovan, M. Smirnova, B. Scheibe, M. Jancelewicz, G. Nowaczyk, M. Kempiński and M. Ziółek, J. Mater. Chem. C, 2024, 12, 8357 DOI: 10.1039/D4TC00466C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements