Issue 38, 2024

Mitigating the volume expansion and enhancing the cycling stability of ferrous fluorosilicate-modified silicon-based composite anodes for lithium-ion batteries

Abstract

Silicon has emerged as a prominent candidate for anodes in advanced lithium-ion batteries due to its exceptional theoretical capacity and low operational potential. Despite its advantages, silicon-based anodes face significant challenges, including substantial volume changes, formation of an unstable solid-electrolyte interphase (SEI) film, and voltage hysteresis during lithium alloying/dealloying, which compromise their cycling stability. This study introduces a novel ferrous fluorosilicate (FeSiF6)-modified silicon-based composite anode. FeSiF6 is prepared via a simple reaction between Fe–Si alloys and hydrofluoric acid (HF). Various treatment methods are employed to create modified silicon-based composites with different compositions and morphologies. This innovative composite material prevents the formation of crystalline Li15Si4 and facilitates the formation of a stable SEI film, thereby markedly improving the cycling stability of the silicon-based anodes. Among these, the composite material Fe–Si@F@C (consisting of Fe–Si alloy@FeSiF6@graphite) demonstrates a stable discharge capacity of 975 mA h g−1 after 200 cycles at 1 A g−1, with ∼94% capacity retention, and outstanding rate performance (664.4 mA h g−1 at 4 A g−1). In comparison, the Fe–Si alloy/graphite anode without FeSiF6 shows a much lower discharge capacity of 458 mA h g−1 at 1 A g−1 after 200 cycles and 291.8 mA h g−1 at 4 A g−1. These findings underscore the critical role of FeSiF6 in modifying silicon-based anodes and enhancing their cycling stability, significantly increasing their potential for commercial application in next-generation lithium-ion batteries.

Graphical abstract: Mitigating the volume expansion and enhancing the cycling stability of ferrous fluorosilicate-modified silicon-based composite anodes for lithium-ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
03 شوال 1445
Accepted
25 صفر 1446
First published
26 صفر 1446

J. Mater. Chem. A, 2024,12, 25747-25760

Mitigating the volume expansion and enhancing the cycling stability of ferrous fluorosilicate-modified silicon-based composite anodes for lithium-ion batteries

J. Sun, X. Liu, P. Zheng, Y. Zhao, Y. Zheng, J. Chai and Z. Liu, J. Mater. Chem. A, 2024, 12, 25747 DOI: 10.1039/D4TA02532F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements