Issue 17, 2024

Development of Pd/In2O3 hybrid nanoclusters to optimize ethanol vapor sensing

Abstract

In this study, we successfully synthesize palladium-decorated indium trioxide (Pd/In2O3) hybrid nanoclusters (NCs) using an advanced dual-target cluster beam deposition (CBD) method, a significant stride in developing high-performance ethanol sensors. The prepared Pd/In2O3 hybrid NCs exhibit exceptional sensitivity, stability, and selectivity to low concentrations of ethanol vapor, with a maximum response value of 101.2 at an optimal operating temperature of 260 °C for 6 at% Pd loading. The dynamic response of the Pd/In2O3-based sensor shows an increase in response with increasing ethanol vapor concentrations within the range of 50 to 1000 ppm. The limit of detection is as low as 24 ppb. The sensor exhibits a high sensitivity of 28.24 ppm−1/2, with response and recovery times of 2.7 and 4.4 seconds, respectively, for 100 ppm ethanol vapor. Additionally, the sensor demonstrates excellent repeatability and stability, with only a minor decrease in response observed over 30 days and notable selectivity for ethanol compared to other common volatile organic compounds. The study highlights the potential of Pd/In2O3 NCs as promising materials for ethanol gas sensors, leveraging the unique capabilities of CBD for controlled synthesis and the catalytic properties of Pd for enhanced gas-sensing performance.

Graphical abstract: Development of Pd/In2O3 hybrid nanoclusters to optimize ethanol vapor sensing

Supplementary files

Article information

Article type
Paper
Submitted
18 شعبان 1445
Accepted
01 شوال 1445
First published
01 شوال 1445

Phys. Chem. Chem. Phys., 2024,26, 13364-13373

Development of Pd/In2O3 hybrid nanoclusters to optimize ethanol vapor sensing

B. Xie, J. Sun, A. Zhang, H. Qian, X. Mao, Y. Li, W. Yan, C. Zhou, H. Wen, S. Xia, M. Han, P. Milani and P. Mao, Phys. Chem. Chem. Phys., 2024, 26, 13364 DOI: 10.1039/D4CP00868E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements