Issue 12, 2023

Aqueous phase hydrogenation of furfural on Ni/TiO2 catalysts: nature of the support phase steers the product selectivity

Abstract

Nickel catalysts supported on six different titania phases (ATA, ATH, P25, ART, RTH and RTS), which differ in phase composition (anatase/rutile), textural characteristics, acidity and nature of metal–support interactions, have been investigated for aqueous phase hydrogenation of furfural. The two phases of titania, anatase and rutile, showed remarkable differences in the activity as well as selectivity for products. Higher conversion of furfural was observed on rutile phase supported catalysts. While both phases showed the formation of furfuryl alcohol, on anatase supported catalysts, the formation of deep hydrogenated products was restricted to cyclopentanone only. On the other hand, on rutile phase supports, further hydrogenated products, like tetrahydrofurfuryl alcohol and cyclopentanol, were observed. Activity/selectivity patterns are rationalized on the basis of metal–support interactions based on XPS, DFT, H2-TPR and acidity data. The results showed that the reducibility of the support depends on the titania crystal phase, which affects active sites at the interface and the metal surface charge redistribution and blockage of reactive sites. The higher reducibility of the anatase phase was found to be detrimental to hydrogenation activity. This investigation paves the way for designing catalysts for selective catalytic transformations of bio-renewable raw materials, like furfural.

Graphical abstract: Aqueous phase hydrogenation of furfural on Ni/TiO2 catalysts: nature of the support phase steers the product selectivity

  • This article is part of the themed collection: Biorefining

Supplementary files

Article information

Article type
Paper
Submitted
11 رجب 1444
Accepted
28 رمضان 1444
First published
29 رمضان 1444

Sustainable Energy Fuels, 2023,7, 2861-2872

Aqueous phase hydrogenation of furfural on Ni/TiO2 catalysts: nature of the support phase steers the product selectivity

A. S. Rajpurohit, V. R. M. Talla, M. Jaccob, K. K. Ramaswamy and B. Viswanathan, Sustainable Energy Fuels, 2023, 7, 2861 DOI: 10.1039/D3SE00131H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements