Issue 5, 2023

Mercury determination in bioresorbable calcium phosphate using a new electrothermal vaporization system coupled to ICP-MS

Abstract

A direct solid sampling method was developed for determining mercury in bioresorbable calcium phosphate-based materials by electrothermal vaporization (ETV) coupled to an inductively coupled plasma mass spectrometry (ICP-MS) instrument. The ETV system is based on fast sample heating using a halogen lamp enclosed in a glass chamber. The heating program comprises only a vaporization step (10 s) followed by a cooling step (120 s) when a solid sample was analyzed. An additional step of 20 s at 80 °C was necessary when aqueous solutions were used for calibration. Mercury was vaporized at a relatively low temperature (650 °C) without co-vaporizing the main matrix (more than 95% of the matrix remains in the lamp dimpled cavity). External calibration with aqueous reference solutions deposited on the sample residue was used for Hg quantification. The accuracy of the proposed method was evaluated by certified reference material analysis (MESS-3) and by pneumatic nebulization ICP-MS (NEB-ICP-MS), and no statistical difference was observed between the results. Relatively high masses (up to 10 mg) can be analyzed without interferences. The limit of quantification (0.2 ng g−1) by ETV-ICP-MS was lower than that by NEB-ICP-MS (60 ng g−1), the precision was better than 15% and the sample throughput was 20 per hour. Therefore, the proposed low-cost ETV system is attractive for determining Hg at the ultra-trace level in biomaterials and can be used for routine analyses.

Graphical abstract: Mercury determination in bioresorbable calcium phosphate using a new electrothermal vaporization system coupled to ICP-MS

Supplementary files

Article information

Article type
Technical Note
Submitted
20 جمادى الأولى 1444
Accepted
24 شعبان 1444
First published
13 رمضان 1444

J. Anal. At. Spectrom., 2023,38, 1000-1006

Mercury determination in bioresorbable calcium phosphate using a new electrothermal vaporization system coupled to ICP-MS

J. S. Silva, G. M. Heidrich, B. O. Poletto, J. N. G. Paniz, V. L. Dressler and E. M. M. Flores, J. Anal. At. Spectrom., 2023, 38, 1000 DOI: 10.1039/D2JA00414C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements