Issue 10, 2022

Inkjet printing of two-dimensional van der Waals materials: a new route towards emerging electronic device applications

Abstract

Two-dimensional (2D) van der Waals (vdW) materials are considered one of the most promising candidates to realize emerging electrical applications. Although until recently, much effort has been dedicated to demonstrating high-performance single 2D vdW devices, associated with rapid progress in 2D vdW materials, demands for their large-scale practical applications have noticeably increased from a manufacturing perspective. Drop-on-demand inkjet printing can be the most feasible solution by exploiting the advantages of layered 2D contacts and advanced 2D vdW ink formulations. This review presents recent achievements in inkjet-printed 2D vdW material-based device applications. A brief introduction to 2D vdW materials and inkjet printing principles, followed by various ink formulation methods, is first presented. Then, the state-of-the-art inkjet-printed 2D vdW device applications and their remaining technical issues are highlighted. Finally, prospects and challenges to be overcome to demonstrate fully inkjet-printed, high-performance 2D vdW devices are also discussed.

Graphical abstract: Inkjet printing of two-dimensional van der Waals materials: a new route towards emerging electronic device applications

Article information

Article type
Minireview
Submitted
27 شعبان 1443
Accepted
15 ذو الحجة 1443
First published
21 ذو الحجة 1443

Nanoscale Horiz., 2022,7, 1161-1176

Inkjet printing of two-dimensional van der Waals materials: a new route towards emerging electronic device applications

K. Cho, T. Lee and S. Chung, Nanoscale Horiz., 2022, 7, 1161 DOI: 10.1039/D2NH00162D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements