Issue 43, 2021

Structural features and morphology of titanium dioxide–bismuth vanadate heterojunctions

Abstract

Titanium dioxide TiO2 (TO) and bismuth vanadate BiVO4 (BVO) are promising photoactive semiconducting oxides for heterogeneous photocatalysis devoted to water treatment, pollutant degradation and water splitting processes. This work explores the design of heterojunctions associating the monoclinic scheelite structure of BVO with the anatase polymorph of TO. Their type II band alignment features at the interface ensure efficient photogenerated charge transfer between the structures and improve their lifetime for efficient photocatalytic processes. The RF-sputtering deposition of TO/BVO heterostructures was realized in two configurations. The first heterostructure consists of a composite film of TO/BVO and the second one is TO/BVO/substrate layered structures deposited on various substrates (Borofloat-BK7, aluminium phosphate ceramic (AlPO)). The order of the film deposition ensures harvesting of a wide spectral range of visible light. To stabilize the relevant crystalline structures of both the composite and layered films, the RF-sputtering deposition parameters (RF-power, temperature) and the post deposition annealing treatment conditions were optimized. The structural, optical and morphological analyses of the prepared films were performed and the formation of the band gap engineered heterostructures with good dye degradation efficiency was achieved.

Graphical abstract: Structural features and morphology of titanium dioxide–bismuth vanadate heterojunctions

Article information

Article type
Paper
Submitted
17 ذو الحجة 1442
Accepted
04 ربيع الأول 1443
First published
21 ربيع الأول 1443

CrystEngComm, 2021,23, 7679-7690

Structural features and morphology of titanium dioxide–bismuth vanadate heterojunctions

K. T. Drisya, M. Edely, M. Solís-López, A. Jantrania, S. Auguste, A. Rousseau, H. Casteneda, S. Velumani and A. Kassiba, CrystEngComm, 2021, 23, 7679 DOI: 10.1039/D1CE00982F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements