Issue 6, 2020

Solution-processed PDMS/SWCNT porous electrodes with high mass loading: toward high performance all-stretchable-component lithium ion batteries

Abstract

Stretchable lithium ion batteries receive considerable attention due to their promising application to meet the growing demand of wearable portable electronics. Despite tremendous efforts being made to fabricate stretchable lithium ion batteries, challenges remain due to the complicated fabrication process, high fabrication cost, and low mass loading. Herein, a simple design concept for all-stretchable-component lithium ion batteries via an all solution process is reported. All components are stretchable, including Li4Ti5O12 (LTO) and LiFePO4 (LFP) electrodes based on the 3D polydimethylsiloxane (PDMS)/single-wall carbon nanotube (SWCNT) porous framework, poly(vinylidene fluoride-co-hexa-fluoropropylene) (PVDF-HFP) gel separator, and PDMS package. The prepared electrodes based on the versatile 3D PDMS/SWCNT porous framework show many superior merits, such as high mass loading, good stretchability, outstanding mechanical durability, and high conductivity. More impressively, the mass loading of our electrode materials is as high as 7 mg cm−2, which is higher than that of all the reported all-stretchable-component lithium ion batteries. The resulting practical capacity is improved significantly up to 0.81 mA h cm−2 at 0.069C. The full cell delivers a high capacity of 0.66 mA h cm−2 even after 100 stretch–release cycles of 50% tensile strain at 0.075C, and shows a stable power supply during various extreme deformations. This work opens a feasible route to construct all-stretchable-component lithium ion batteries with high electrochemical performance and high stretchability, presenting promising potential for application in new-generation wearable and portable energy storage devices.

Graphical abstract: Solution-processed PDMS/SWCNT porous electrodes with high mass loading: toward high performance all-stretchable-component lithium ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
22 ربيع الأول 1441
Accepted
14 جمادى الأولى 1441
First published
21 جمادى الأولى 1441

Sustainable Energy Fuels, 2020,4, 2718-2726

Solution-processed PDMS/SWCNT porous electrodes with high mass loading: toward high performance all-stretchable-component lithium ion batteries

J. Liang, S. Wang, H. Yu, X. Zhao, H. Wang, Y. Tong, Q. Tang and Y. Liu, Sustainable Energy Fuels, 2020, 4, 2718 DOI: 10.1039/C9SE01120J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements