Issue 7, 2020

Single-unit-cell-thick layered electrocatalysts: from synthesis to application

Abstract

Electrocatalysts are critical for water splitting, carbon dioxide reduction, and zinc–air battery. However, the low-exposed surface areas of bulk electrocatalysts usually limit the complete utilization of active sites. Ultrathin electrocatalysts have noteworthy advantages in maximizing the use of active sites. Among the pioneering works on such performing catalysts, the development of single-unit-cell-thick layered electrocatalysts (STLEs) has attracted extensive attention owing to their superior specific surface area and large number of vacancies, which can provide abundant available surface active sites. Therefore, this minireview provides recent advances in STLE synthesis and applications, which are helpful for electrocatalysis-oriented researchers. Finally, the future perspectives and challenges for developing high-performance STLEs are proposed.

Graphical abstract: Single-unit-cell-thick layered electrocatalysts: from synthesis to application

Article information

Article type
Minireview
Submitted
05 شعبان 1441
Accepted
09 شوال 1441
First published
17 شوال 1441
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2020,2, 2678-2687

Single-unit-cell-thick layered electrocatalysts: from synthesis to application

S. Gao, Y. Liu, H. Li, X. Liu and J. Luo, Nanoscale Adv., 2020, 2, 2678 DOI: 10.1039/D0NA00245C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements