Issue 2, 2020

Removal of chloride ions using a bismuth electrode in capacitive deionization (CDI)

Abstract

Non-carbon materials in capacitive deionization (CDI) can help to enhance the capacity of removed ions. Here, we report for the first time the removal of chloride ions (Cl) with a bismuth (Bi) anode when coupled with an activated carbon (AC) cathode in CDI. The effects of carbon black in the Bi electrode, applied voltage, electrode mass loading and initial concentration on Cl removal are investigated. Moreover, its cycle performance is also tested. Results show that addition of carbon black to a Bi electrode (Bi@CB) significantly improves Cl removal. The declining trend of Cl concentration and appearance of peaks assigned to products of bismuth oxychloride (BiOCl) in XRD patterns confirm Cl storage by the Bi electrode, which is enhanced with an increase in voltage. When coupled with AC in a fixed mass, increasing the Bi mass does not contribute to more Cl removal. Although the cycle performance is not excellent (the attenuation rate is 74% after 10 cycles), its chloride removal capacity is ∼2–3 times the value of AC (e.g. 0.95 vs. 0.32 mmol gBi−1 at 1.2 V in 500 mg L−1 NaCl solution). Besides, the Bi–AC electrode pair in CDI is more suitable to remove Cl from a solution with a Cl concentration of below 600 mg L−1.

Graphical abstract: Removal of chloride ions using a bismuth electrode in capacitive deionization (CDI)

Article information

Article type
Paper
Submitted
07 ربيع الأول 1441
Accepted
30 ربيع الأول 1441
First published
02 ربيع الثاني 1441

Environ. Sci.: Water Res. Technol., 2020,6, 373-382

Removal of chloride ions using a bismuth electrode in capacitive deionization (CDI)

J. Chang, F. Duan, C. Su, Y. Li and H. Cao, Environ. Sci.: Water Res. Technol., 2020, 6, 373 DOI: 10.1039/C9EW00985J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements