Issue 6, 2020

Interfacial structure-governed SO2 resistance of Cu/TiO2 catalysts in the catalytic oxidation of CO

Abstract

Three types of Cu–Ti interfacial structures have been fabricated by using different preparation methods. The mechanism regarding the interfacial effect on oxidation of CO and resistance to SO2 has been elaborated. It is proposed that an O vacancy-steered catalytic oxidation of CO prevails over an in situ Cu-doped TiO2 (DT) catalyst while a lattice O-initiated one proceeds on the other two catalysts that are obtained via solvent free and mechanical mixing methods. The former catalyst exhibits a strong Cu–Ti interface due to the high dispersion of copper species on TiO2 and partial incorporation of Cu2+ into the TiO2 matrix. This not only creates rich O vacancies, enhances O mobility and thus leads to superior redox ability of DT, hence promoting CO oxidation, but also restricts the interaction of SO2 with strongly-anchored Cu2+ species and thus increases the SO2 tolerance of DT. Meanwhile, the latter two catalysts have aggregated CuO either above or inside TiO2, which leads to rapid sulfation of CuO and deactivation of the catalysts.

Graphical abstract: Interfacial structure-governed SO2 resistance of Cu/TiO2 catalysts in the catalytic oxidation of CO

Supplementary files

Article information

Article type
Paper
Submitted
30 ربيع الأول 1441
Accepted
04 جمادى الثانية 1441
First published
04 جمادى الثانية 1441

Catal. Sci. Technol., 2020,10, 1661-1674

Interfacial structure-governed SO2 resistance of Cu/TiO2 catalysts in the catalytic oxidation of CO

W. Yang, L. Li, Y. Fang, Y. Shan, J. Xu, H. Shen, Y. Yu, Y. Guo and H. He, Catal. Sci. Technol., 2020, 10, 1661 DOI: 10.1039/C9CY02405K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements