Issue 41, 2019

Self-templated construction of 1D NiMo nanowires via a Li electrochemical tuning method for the hydrogen evolution reaction

Abstract

NiMo based materials have been widely recognized as the most promising alternatives to noble Pt electrocatalysts used in alkaline electrolytes for the hydrogen evolution reaction. However, it is difficult to construct a nanostructure, especially 1D morphology, for NiMo materials via an electrochemical method. Herein, a novel Li electrochemical tuning method, for the first time, is introduced to synthesize 1D NiMo nanowires by insertion of lithium ions into parent NiMoO4 nanorods. The as-prepared NiMo catalyst exhibits high HER activity in 1 M KOH, in terms of low overpotential (73 mV) at a current density of 10 mA cm−2 and a small Tafel slope (37.2 mV dec−1) and charge transfer resistance (11.3 Ω). Furthermore, no decay in catalytic performance is observed for this material when it is operated at −0.125 V (vs. RHE) for 1250 min and a high Faraday efficiency (96%) is achieved. The high activity of NiMo is ascribed to the synergistic interplay between Ni and Mo and its unique nanostructure, which can expose more active sites and facilitate the mass transfer and hydrogen bubble release.

Graphical abstract: Self-templated construction of 1D NiMo nanowires via a Li electrochemical tuning method for the hydrogen evolution reaction

Supplementary files

Article information

Article type
Paper
Submitted
20 شوال 1440
Accepted
27 ذو القعدة 1440
First published
04 ذو الحجة 1440

Nanoscale, 2019,11, 19429-19436

Self-templated construction of 1D NiMo nanowires via a Li electrochemical tuning method for the hydrogen evolution reaction

D. Huang, S. Li, Y. Luo, L. Liao, J. Ye and H. Chen, Nanoscale, 2019, 11, 19429 DOI: 10.1039/C9NR05311E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements