Issue 15, 2018

Photonic hydrogels for the ultratrace sensing of divalent beryllium in seawater

Abstract

Responsive photonic hydrogels functionalized with crown ether molecules containing the smallest cavities are designed for the detection of the smallest metal ion – beryllium ion (Be2+) – in seawater systems through the exploitation of the volume induced structural color change of non-close packed colloidal photonic crystals (CPCs), which are immobilized in the hydrogels. A new two-step versatile polymerization process has been developed to fabricate these intelligent hydrogel sensing materials. The CPCs in suspension are firstly embedded within a polyvinyl alcohol (PVA) hydrogel scaffold by a cryotropic gelation process, and then the ion-recognition functional groups are covalently bonded to an additional polyacrylamide hydrogel over the PVA via a photochemical reaction. After the removal of the PVA scaffold, the remaining hydrogel exhibits a vivid structural color on account of the diffraction of the photonic crystals in the visible spectral range, while the grafted benzo-9-crown-3 can strongly and selectively chelate with Be2+ ions in solution. The hydrogel sensor enables the detection of Be2+ ions quantitatively and achieves a detection of limit of 10−11 M in seawater. Through this design and fabrication method, a simple and low-cost sensor for the in situ monitoring of toxic ions or compounds in seawater has been demonstrated.

Graphical abstract: Photonic hydrogels for the ultratrace sensing of divalent beryllium in seawater

Supplementary files

Article information

Article type
Paper
Submitted
29 ربيع الثاني 1439
Accepted
05 رجب 1439
First published
05 رجب 1439

J. Mater. Chem. C, 2018,6, 4234-4242

Photonic hydrogels for the ultratrace sensing of divalent beryllium in seawater

J. Qin, B. Dong, L. Cao and W. Wang, J. Mater. Chem. C, 2018, 6, 4234 DOI: 10.1039/C8TC00242H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements