Issue 7, 2018

Multi-energy calibration as a strategy for elemental analysis of fertilizers by microwave-induced plasma optical emission spectrometry

Abstract

Multi-energy calibration (MEC) was applied for the determination of As, Ba, Cd, Cr, and Pb in fertilizer samples by microwave-induced plasma optical emission spectrometry. Commercial fertilizer samples and a certified reference material of mineral fertilizer (CRM NIST 695) were digested using microwave-assisted acid. The MEC approach was carried out using only two calibration solutions: S1, composed of 50% v/v digested sample and 50% v/v standard reference solution containing the analytes, and S2, composed of 50% v/v sample and 50% v/v blank solution. The accuracy of the method was evaluated by analyzing CRM NIST 695, with recoveries in the 96–101% range. Addition and recovery experiments were also carried out for Cd determination, with recoveries between 92 and 105% for the evaluated samples. The MEC strategy was compared with traditional external standard calibration and standard additions methods and was the only one to provide accurate results for all evaluated analytes.

Graphical abstract: Multi-energy calibration as a strategy for elemental analysis of fertilizers by microwave-induced plasma optical emission spectrometry

Article information

Article type
Paper
Submitted
28 جمادى الثانية 1439
Accepted
08 شعبان 1439
First published
08 شعبان 1439

J. Anal. At. Spectrom., 2018,33, 1168-1172

Multi-energy calibration as a strategy for elemental analysis of fertilizers by microwave-induced plasma optical emission spectrometry

R. C. Machado, A. B. S. Silva, G. L. Donati and A. R. A. Nogueira, J. Anal. At. Spectrom., 2018, 33, 1168 DOI: 10.1039/C8JA00077H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements