Issue 45, 2017

In situ preparation of a macro-chamber for S conversion reactions in lithium–sulfur batteries

Abstract

Lithium–sulfur (Li–S) batteries have been identified as the most promising options for energy storage because of their high theoretical capacity and environmental friendliness. However, low utilization of sulfur in the cathode and the shuttle effect, which leads to a poor cycle life, hinder the realization of Li–S batteries. Herein, we have designed a new type of rGO-supported TiN-nanoparticle (TiN/rGO) multifunction cover layer via an in situ synthesis method. The excellent blocking effect of lithium polysulfides and outstanding catalytic ability and superior electron conductivity of the TiN/rGO cover layer favor the development of a macro-chamber for S conversion reactions (MCSR) at a macroscopic scale. This macro-chamber, in which either pure sulfur powders or sulfur-based composites can be directly adopted as active materials, can significantly reduce the shuttle effect and increase sulfur utilization for lithium–sulfur batteries. When the S powder loading is as high as 8 mg cm−2, the battery continues to deliver outstanding electrochemical performance and cycling stability. Via this MCSR design, indispensable support materials for S and additives for electrolyte will no longer be needed in the current Li–S cells.

Graphical abstract: In situ preparation of a macro-chamber for S conversion reactions in lithium–sulfur batteries

Supplementary files

Article information

Article type
Paper
Submitted
29 ذو الحجة 1438
Accepted
20 محرم 1439
First published
21 محرم 1439

J. Mater. Chem. A, 2017,5, 23497-23505

In situ preparation of a macro-chamber for S conversion reactions in lithium–sulfur batteries

D. Deng, J. Lei, F. Xue, C. Bai, X. Lin, J. Ye, M. Zheng and Q. Dong, J. Mater. Chem. A, 2017, 5, 23497 DOI: 10.1039/C7TA08309B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements