Issue 8, 2017

Hybrid PEDOT/MnOx nanostructured electrocatalysts for oxygen reduction

Abstract

A series of hybrid poly(3,4-ethylenedioxythiophene)/manganese oxide (PEDOT/MnOx) thin films have been prepared via a stepwise approach: electrodeposition of PEDOT, followed by formation of MnOx particles by a spontaneous redox reaction between PEDOT and KMnO4. Electrocatalytic characterization of the PEDOT/MnOx thin films demonstrates high activity toward the oxygen reduction reaction (ORR), with a shift in intrinsic ORR onset and half-wave potentials by ca. 0.2 V to lower overpotential relative to the PEDOT thin film. The most active PEDOT/MnOx thin film electrocatalyst, P-MnOx-20, demonstrates superior activity relative to the commercial 20% Pt/C catalyst in the half-wave region of the ORR potential window at equal mass loading, with a half-wave potential of 0.83 V (20% Pt/C, 0.81 V) and charge transfer resistance of 479 Ω (20% Pt/C, 862 Ω). The P-MnOx-20 film also demonstrates preference to a pseudo-four electron ORR pathway (n = 3.8) and high specific ORR activity, when considered on both a total mass (−96 mA mgtotal−1; 20% Pt/C: −108 mA mgtotal−1) and metal (or metal oxide) mass basis (−296 mA mgMnOx−1; 20% Pt/C: −540 mA mgPt−1). The P-MnOx-20 film has been identified as the most active PEDOT/ceramic composite electrocatalyst reported to date, which is rationalized by the high surface concentration of Mn(III), strong electronic coupling between PEDOT and MnOx, as well as a high active site density and efficiency achieved by the stepwise electrodeposition-redox approach.

Graphical abstract: Hybrid PEDOT/MnOx nanostructured electrocatalysts for oxygen reduction

Supplementary files

Article information

Article type
Research Article
Submitted
13 رجب 1438
Accepted
29 رجب 1438
First published
09 شعبان 1438

Mater. Chem. Front., 2017,1, 1668-1675

Hybrid PEDOT/MnOx nanostructured electrocatalysts for oxygen reduction

J. A. Vigil, T. N. Lambert, M. Kelly and R. Aidun, Mater. Chem. Front., 2017, 1, 1668 DOI: 10.1039/C7QM00147A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements