Issue 3, 2017

Whispering-gallery-mode based CH3NH3PbBr3 perovskite microrod lasers with high quality factors

Abstract

Lead halide perovskite based micro- and nano-lasers have been widely studied in the past two years. Due to their long carrier diffusion length and high external quantum efficiency, lead halide perovskites have been considered to have a bright future in optoelectronic devices, especially in the “green gap” wavelength region. However, the quality (Q) factors of perovskite lasers are unspectacular compared to conventional microdisk lasers. The record value of full width at half maximum (FWHM) at the threshold is still around 0.22 nm. Herein we synthesized solution-processed, single-crystalline CH3NH3PbBr3 perovskite microrods and studied their lasing actions. In contrast to entirely pumping a microrod on a substrate, we partially excited the microrods that were hanging in the air. Consequently, single-mode or few-mode laser emissions have been successfully obtained from the whispering-gallery like diamond modes, which are confined by total internal reflection within the transverse plane. Owning to the better light confinement and high crystal quality, the FWHM at the threshold has been significantly improved. The smallest FWHM at the threshold is around 0.1 nm, giving a Q factor over 5000.

Graphical abstract: Whispering-gallery-mode based CH3NH3PbBr3 perovskite microrod lasers with high quality factors

Article information

Article type
Research Article
Submitted
16 رجب 1437
Accepted
15 رمضان 1437
First published
16 ذو القعدة 1437

Mater. Chem. Front., 2017,1, 477-481

Whispering-gallery-mode based CH3NH3PbBr3 perovskite microrod lasers with high quality factors

K. Wang, S. Sun, C. Zhang, W. Sun, Z. Gu, S. Xiao and Q. Song, Mater. Chem. Front., 2017, 1, 477 DOI: 10.1039/C6QM00028B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements