Issue 46, 2016

Fabrication of a heated electrode modified with a thiol-functionalized ionic liquid for electrochemical/electrochemiluminescence sensors

Abstract

A new heated thiol-functionalized ionic liquid (TFIL)/Au composite electrode, which possessed the advantages of a heated electrode technique and ionic liquids (ILs), was designed and fabricated in this study. The electrode temperature (Te) could be accurately controlled by indirect electrical heating. Attributed to the stable Au–S bone and the very low vapor pressure of IL, the immobilized TFIL was stable on the electrode at high Te. The heated TFIL/Au electrode could be expediently used to study the electrochemical behavior of thermally unstable material at high temperature. The analytical performances of electrochemical (EC)/electrochemiluminescence (ECL) detection systems based on the heated TFIL/Au electrodes were evaluated by HSO3− and phenol, respectively. Higher electron-transfer rates, enhanced sensitivities, and improved reproducibilities were obtained compared with the bare Au electrode. The heated TFIL/Au composite electrode presented a promising platform for EC or ECL sensors.

Graphical abstract: Fabrication of a heated electrode modified with a thiol-functionalized ionic liquid for electrochemical/electrochemiluminescence sensors

Supplementary files

Article information

Article type
Paper
Submitted
20 جمادى الأولى 1437
Accepted
02 رجب 1437
First published
04 رجب 1437

RSC Adv., 2016,6, 39955-39961

Fabrication of a heated electrode modified with a thiol-functionalized ionic liquid for electrochemical/electrochemiluminescence sensors

Y. Chen, Y. Li, L. Jiang, L. Huang, Q. Lin and G. Chen, RSC Adv., 2016, 6, 39955 DOI: 10.1039/C6RA05302E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements